{"title":"Ford - Moottorin huohotus","description":null,"products":[{"product_id":"radium-engineering-dual-catch-can-kit-ford-fiesta-st","title":"Radium Engineering Dual Catch Can Kit - Ford Fiesta ST","description":"\u003ch3\u003eDual Catch Can Kit for Ford Fiesta ST Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2014+ Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. The PCV and crankcase ventilation (CCV) catch cans operate independently to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe system operates as a fully closed-loop design and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0379 Dual Catch Can Kit, Ford Fiesta ST\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe Dual Catch Can Kit combines dedicated PCV and CCV catch cans to provide complete protection for the Fiesta ST's crankcase ventilation system.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the positive crankcase ventilation system to capture oil vapor, moisture, unburned fuel, and other blow-by contaminants during idle, cruising, and deceleration while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can installs inline with the crankcase breather system, where it captures oil vapor and sludge produced during high engine loads (WOT) before they can contaminate the intake piping and intercooler.\u003c\/p\u003e\n\u003cp\u003eTogether, both Fluid Lock® catch cans help maintain cleaner intake components, improve intercooler efficiency, and support long-term engine performance and reliability.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53515788910939,"sku":"USA-RAD-20-0379","price":574.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dual-catch-can-kit-ford-fiesta-st-radium-engineering.jpg?v=1783288366"},{"product_id":"radium-engineering-ford-fiesta-catch-can-kit-st-fluid-lock","title":"Radium Engineering Ford Fiesta ST Fluid Lock Catch Can Kit","description":"\u003ch3\u003ePCV Catch Can Kit for Ford Fiesta ST Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2014+ Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0377-FL PCV Catch Can Kit, Ford Fiesta ST\u003c\/p\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0377-FL PCV Catch Can Kit mounts to the front right-hand engine mount and fits beneath the factory engine cover without any modifications.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the factory positive crankcase ventilation (PCV) valve while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or above atmospheric pressure, the factory PCV check valve closes and there is no flow through the PCV hose. During idle, steady-state cruising, and deceleration, manifold vacuum draws crankcase vapors, unburned fuel, and oil contaminants toward the intake manifold. Without a catch can, these contaminants are routed directly into the engine.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake manifold, helping maintain cleaner intake components while supporting long-term engine performance and reliability. Its pressure-sealed design is ideal for turbocharged applications, allowing direct connection to the intake manifold.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531372159323,"sku":"USA-RAD-20-0377-FL","price":297.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0377-FL.jpg?v=1783425808"},{"product_id":"radium-engineering-catch-can-kit-ccv-ford-focus-rs-16-18-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Ford Focus RS 16-18 Fluid Lock","description":"\u003ch3\u003eCCV Catch Can Kit for Ford Focus RS 2016–2018 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Ford Focus RS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0316 CCV Catch Can Kit, Ford Focus RS\u003c\/p\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering Fluid Lock® CCV Catch Can Kit installs inline with the factory crankcase breather system to capture oil vapor, moisture, and other blow-by contaminants before they reach the intake system.\u003c\/p\u003e\n\u003cp\u003eDesigned as a direct-fit solution, the kit uses vehicle-specific mounting hardware and includes everything required for installation.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0316 CCV Catch Can Kit installs inline with the factory crankcase breather port.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the crankcase ventilation system experiences atmospheric pressure. Under high engine load (WOT), crankcase gases flow toward the intake system carrying oil vapor and sludge. Without a catch can, these contaminants can accumulate in the air intake pipe and intercooler, reducing intercooler thermal efficiency and overall engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components while supporting long-term engine reliability.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eFocus RS-specific laser-cut anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531397783899,"sku":"USA-RAD-20-0316-FL","price":325.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0316-FL.jpg?v=1783426236"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-fiesta-st-1","title":"Radium Engineering Dual Catch Can Kit - Ford Fiesta ST","description":"\u003ch3\u003eCatch Can Petcock Drain Kit Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering Catch Can Petcock Drain Kit allows any compatible Radium Engineering catch can to be drained remotely without removing or unscrewing the catch can body.\u003c\/p\u003e\n\u003cp\u003eThe kit installs to the catch can drain port, making routine maintenance quicker and more convenient while reducing the risk of spills during servicing.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eDesigned for easy maintenance, the Petcock Drain Kit provides a simple remote drain solution for Radium Engineering catch cans. The included ball valve allows collected oil and contaminants to be drained on demand without removing the catch can from the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe high-quality components are built for durability and provide a clean, reliable installation.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBlack anodized 4AN ORB barbed adapter fitting\u003c\/li\u003e\n\u003cli\u003eBall valve with 1\/4-inch barbs (rated to 125 psi at 140°F)\u003c\/li\u003e\n\u003cli\u003e4 feet of Radium 1\/4-inch PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531605729627,"sku":"USA-RAD-20-0379","price":574.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dual-catch-can-kit-ford-fiesta-st-radium-engineering_1.jpg?v=1783427326"},{"product_id":"radium-engineering-dual-catch-can-kit-shelby-gt500-s197-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Shelby GT500 S197 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Shelby GT500 S197 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eShelby GT500 (S197)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering Dual Catch Can Kit is specifically designed for the Shelby GT500 (S197) and installs using factory mounting locations with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe PCV and Crankcase catch can systems operate independently while working together to provide complete crankcase ventilation protection. These closed-loop systems do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kit installs in minutes and can be easily removed for servicing.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe Dual Catch Can Kit combines dedicated PCV and Crankcase catch can systems for maximum engine protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the factory positive crankcase ventilation (PCV) valve while retaining full OEM functionality. During idle, steady-state cruising, and deceleration, it captures metered crankcase vapors, unburned fuel, and oil sludge before they enter the intake manifold. Because the Fluid Lock® catch can is pressure sealed, it is ideally suited for the GT500's supercharged engine and permits direct intake manifold connection.\u003c\/p\u003e\n\u003cp\u003eThe Crankcase catch can installs inline with the factory crankcase breather port. During high engine load (WOT), it captures oil vapor and blow-by contaminants before they reach the air intake system, helping reduce oil accumulation and maintain cleaner intake components.\u003c\/p\u003e\n\u003cp\u003eWorking together, both catch cans help improve long-term engine reliability and maintain consistent performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eFord S197-specific laser-cut anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 10AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003e5\/8-inch PCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCrankcase Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eFord S197-specific laser-cut anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 10AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003e5\/8-inch PCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531953824091,"sku":"USA-RAD-20-0329-FL","price":610.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0329-FL.jpg?v=1783429103"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-fiesta-st-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Ford Fiesta ST Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Ford Fiesta ST Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2014+ Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe PCV and Crankcase catch can systems operate independently and are available individually or together as a dual kit. These closed-loop systems do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting locations and fit beneath the factory engine cover with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe Dual Catch Can Kit combines both the PCV and Crankcase catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can mounts to the front right-hand engine mount and installs inline with the factory PCV valve, capturing metered crankcase vapors, unburned fuel, and oil sludge before they reach the intake manifold. Because the Fluid Lock® catch can is pressure sealed, it is ideal for this turbocharged application and permits direct intake manifold connection.\u003c\/p\u003e\n\u003cp\u003eThe Crankcase catch can mounts to the two factory ECU mounting studs on the rear left-hand side of the engine bay and installs inline with the crankcase vent hose. During high engine load (WOT), it captures oil vapor and sludge before they can contaminate the intake piping and intercooler.\u003c\/p\u003e\n\u003cp\u003eWorking together, both Fluid Lock® catch cans help keep the intake system cleaner, maintain intercooler efficiency, and support long-term engine performance and reliability.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eFiesta ST-specific anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCrankcase Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eFiesta ST-specific anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531967455579,"sku":"USA-RAD-20-0379-FL","price":594.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0379-FL.jpg?v=1783429222"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-focus-rs-16-18-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Ford Focus RS 16-18 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Ford Focus RS 2016–2018 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Ford Focus RS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can system combines independent PCV and CCV catch cans to provide complete crankcase ventilation protection. Both systems operate independently and are available individually or together as a dual kit.\u003c\/p\u003e\n\u003cp\u003eThese closed-loop catch cans do not vent to atmosphere (VTA), making them emissions and track legal. They remove oil, sludge, and blow-by contaminants from crankcase gases before they are returned to the engine, promoting negative crankcase pressure while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting locations with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0328-FL Dual Catch Can Kit, Ford Focus RS\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0328-FL Dual Catch Can Kit combines both the PCV and CCV catch can systems to provide maximum protection for the EcoBoost engine.\u003c\/p\u003e\n\u003cp\u003eWorking together, the two Fluid Lock® catch cans capture oil vapor, moisture, fuel residue, and other blow-by contaminants before they reach the intake system. This helps keep the intake tract cleaner, reduces oil buildup throughout the induction system, and supports long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eIntegrated dipsticks make it easy to inspect accumulated fluid for routine maintenance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53532091187547,"sku":"USA-RAD-20-0328-FL","price":651.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0328-FL.jpg?v=1783430281"},{"product_id":"radium-engineering-catch-can-kit-ccv-ford-mustang-gt-11-14-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Ford Mustang GT 11-14 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for Ford Mustang GT 2011–2014 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2011–2014 Ford Mustang GT (S197)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is an essential upgrade for protecting high-performance engines from crankcase blow-by generated during spirited driving. Excess oil vapors entering the intake system can reduce performance by contaminating intake components.\u003c\/p\u003e\n\u003cp\u003eThe Radium Engineering Fluid Lock® Crankcase Catch Can Kit mounts on the front left engine bank and installs inline with the factory crankcase breather system while retaining full factory functionality.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0279-FL Crankcase Catch Can Kit, Ford Mustang GT\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0279-FL Crankcase Catch Can Kit mounts on the front left engine bank and installs inline with the factory crankcase breather port.\u003c\/p\u003e\n\u003cp\u003eUnder light engine loads, the crankcase ventilation system experiences atmospheric pressure. During high engine load (WOT), crankcase gases flow from the crankcase into the intake system carrying oil vapor and sludge. Without a catch can, these contaminants accumulate in the air intake pipe and, on turbocharged or supercharged applications, can also collect inside the intercooler, reducing heat exchanger efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components and supporting long-term engine reliability.\u003c\/p\u003e\n\u003cp\u003eFor complete crankcase ventilation protection, Radium Engineering recommends pairing this kit with the 20-0267-FL PCV Catch Can Kit as part of the 20-0324-FL Dual Catch Can Kit.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53553921687899,"sku":"USA-RAD-20-0279-FL","price":318.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0279-FL.jpg?v=1783626424"},{"product_id":"radium-engineering-catch-can-kit-ccv-ford-mustang-gt-15-17-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Ford Mustang GT 15-17 Fluid Lock","description":"\u003ch3\u003eCrankcase Catch Can Kit for Ford Mustang GT 2015–2017 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2017 Ford Mustang GT (S550)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe PCV and Crankcase catch can systems function independently and are available individually or as a complete dual kit. These closed-loop systems do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe catch can mounts to the engine using the factory valve cover mounting points and requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0287-FL Crankcase Catch Can Kit, Ford Mustang GT\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0287-FL Crankcase Catch Can Kit installs inline with the factory crankcase ventilation system to capture oil vapor, moisture, and other blow-by contaminants before they reach the intake system.\u003c\/p\u003e\n\u003cp\u003eBy removing these contaminants, the Fluid Lock® catch can helps keep the intake tract cleaner, reducing oil buildup while supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eFor complete crankcase ventilation protection, Radium Engineering recommends pairing this kit with the 20-0267-FL PCV Catch Can Kit as part of the 20-0325-FL Dual Catch Can Kit.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53553990566235,"sku":"USA-RAD-20-0287-FL","price":271.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0287-FL.jpg?v=1783626786"},{"product_id":"radium-engineering-catch-can-kit-crankcase-ford-fiesta-st-fluid-lock","title":"Radium Engineering Catch Can Kit Crankcase - Ford Fiesta ST Fluid Lock","description":"\u003ch3\u003eCrankcase Catch Can Kit for Ford Fiesta ST Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2014+ Ford Fiesta ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe Fiesta ST PCV and Crankcase catch can systems operate independently and are available individually or as a complete dual kit. These closed-loop systems do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0378 Crankcase Catch Can Kit, Ford Fiesta ST\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0378 Crankcase Catch Can Kit mounts to the two factory ECU mounting studs on the rear left-hand side of the engine bay and fits beneath the factory engine cover without modification.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the crankcase vent hose. Under light engine loads, this system experiences atmospheric pressure. During high engine load (WOT), crankcase gases flow toward the intake system, carrying oil vapor and sludge that would normally contaminate the intake pipe and intercooler, reducing heat exchanger efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components and consistent engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eFiesta ST-specific anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554002231643,"sku":"USA-RAD-20-0378-FL","price":297.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0378-FL.jpg?v=1783626970"},{"product_id":"radium-engineering-catch-can-kit-pcv-ford-mustang-gt-11-17-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Ford Mustang GT 11-17 Fluid Lock","description":"\u003ch3\u003ePCV Catch Can Kit for Ford Mustang GT 2011–2017 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2011–2014 Ford Mustang GT (S197)\u003c\/li\u003e\n\u003cli\u003e2015–2017 Ford Mustang GT (S550)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe 20-0267-FL PCV Catch Can Kit is designed for Ford Mustang GT models in both the S197 and S550 chassis. It mounts on the front right engine bank using factory mounting points for a straightforward installation.\u003c\/p\u003e\n\u003cp\u003eThe pressure-sealed Fluid Lock® catch can retains the factory closed-loop PCV system while capturing oil vapor and other contaminants before they reach the intake manifold. The kit installs in minutes and can be easily removed for servicing.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0267-FL PCV Catch Can Kit, Ford Mustang GT\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can installs inline with the factory positive crankcase ventilation (PCV) valve while maintaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and no flow occurs through the PCV hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum that would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components and supporting long-term engine performance.\u003c\/p\u003e\n\u003cp\u003eBecause the catch can is pressure sealed, no additional inline check valve is required, making it suitable for both naturally aspirated and boosted applications while allowing direct intake manifold connection.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554017010011,"sku":"USA-RAD-20-0267-FL","price":318.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0267-FL_1.jpg?v=1783627196"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-mustang-gt-11-14-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Ford Mustang GT 11-14 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Ford Mustang GT 2011–2014 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2011–2014 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering 20-0324-FL Dual Catch Can Kit provides complete crankcase ventilation protection by combining both the PCV and Crankcase catch can systems.\u003c\/p\u003e\n\u003cp\u003eDesigned as a direct bolt-on upgrade, the kit installs in minutes, retains factory functionality, and can be easily removed for servicing. The pressure-sealed Fluid Lock® catch cans are suitable for naturally aspirated and boosted applications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0324-FL Dual Catch Can Kit, Ford Mustang GT\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe dual catch can system combines the 20-0267-FL PCV Catch Can Kit and the 20-0279-FL Crankcase Catch Can Kit to provide maximum engine protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the factory positive crankcase ventilation (PCV) valve while retaining OEM operation. When intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and no flow occurs through the PCV hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum that would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system. Because the catch can is pressure sealed, no additional check valve is required, making it ideal for boosted applications while allowing direct intake manifold connection.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20-0267-FL PCV Catch Can Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCrankcase Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20-0279-FL Crankcase Catch Can Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554168693083,"sku":"USA-RAD-20-0324-FL","price":610.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0324-FL.jpg?v=1783628824"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-mustang-gt-15-17-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Ford Mustang GT 15-17 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Ford Mustang GT 2015–2017 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2017 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering 20-0325-FL Dual Catch Can Kit provides complete crankcase ventilation protection by combining both the PCV and Crankcase catch can systems.\u003c\/p\u003e\n\u003cp\u003eDesigned as a direct bolt-on upgrade, the kit installs in minutes, retains factory functionality, and can be easily removed for servicing. The pressure-sealed Fluid Lock® catch cans are suitable for naturally aspirated and boosted applications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0325-FL Dual Catch Can Kit, Ford Mustang GT\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe dual catch can system combines the 20-0267-FL PCV Catch Can Kit and the 20-0287-FL Crankcase Catch Can Kit to provide maximum engine protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the factory positive crankcase ventilation (PCV) valve while retaining OEM operation. When intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and no flow occurs through the PCV hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum that would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system. Because the catch can is pressure sealed, no additional check valve is required, making it ideal for boosted applications while allowing direct intake manifold connection.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20-0267-FL PCV Catch Can Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCrankcase Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20-0287-FL Crankcase Catch Can Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554178589019,"sku":"USA-RAD-20-0325-FL","price":610.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0325-FL.jpg?v=1783628919"},{"product_id":"radium-engineering-catch-can-kit-pcv-ford-focus-ecoboost-13-18-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Ford Focus EcoBoost 13-18 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for Ford Focus EcoBoost 2013–2018 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2016–2018 Ford Focus RS\u003c\/li\u003e\n\u003cli\u003e2013–2018 Ford Focus ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is an essential upgrade for performance vehicles, helping protect the engine from elevated levels of crankcase blow-by generated during high-performance driving. Excess oil vapors entering the intake system can reduce engine performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0315-FL PCV Catch Can Kit\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0315-FL PCV Catch Can Kit installs inline with the factory positive crankcase ventilation (PCV) valve while retaining its original function.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and there is no flow through the hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, which would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components and improved engine performance. Because the catch can is pressure sealed, it is ideal for turbocharged applications where the PCV system remains connected to the intake manifold.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554319491419,"sku":"USA-RAD-20-0315-FL","price":340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0315-FL.jpg?v=1783630302"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-focus-st-2015-2018-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Ford Focus ST 2015-2018 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit Radium Engineering for Ford Focus ST 2015–2018 Fluid Lock\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2018 Ford Focus ST\u003c\/li\u003e\n\u003cli\u003eRequires Radium Engineering 20-0356 Sound Symposer Delete Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is an essential upgrade for performance vehicles, helping protect the engine from elevated levels of crankcase blow-by generated during high-performance driving. Excess oil vapors entering the intake system can reduce engine performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can system includes independent PCV and CCV catch cans that operate as a fully closed-loop system. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0358-FL Dual Catch Can Kit, Ford Focus ST, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eDesigned specifically for the 2015–2018 Ford Focus ST EcoBoost engine, this dual catch can kit provides complete protection for both the PCV and CCV crankcase ventilation systems.\u003c\/p\u003e\n\u003cp\u003eThe catch cans mount using factory holes and integrate seamlessly with surrounding engine components. They remove oil, sludge, and other contaminants from crankcase gases before they are returned to the engine for combustion, helping maintain cleaner intake components and supporting long-term engine performance.\u003c\/p\u003e\n\u003cp\u003eIntegrated dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePCV Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eCCV Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eVehicle-specific hoses\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554339610971,"sku":"USA-RAD-20-0358-FL","price":652.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0358-FL_1.jpg?v=1783630545"},{"product_id":"radium-engineering-dual-catch-can-kit-ford-focus-st-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Ford Focus ST Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Ford Focus ST Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2018 Ford Focus ST\u003c\/li\u003e\n\u003cli\u003eRequires Radium Engineering 20-0356 Sound Symposer Delete Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can system includes separate PCV and CCV catch cans that operate independently. They can be purchased individually or together for complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting points and integrate seamlessly with surrounding engine components. They do not vent to atmosphere (VTA), making them emissions and track legal.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system removes oil and sludge from crankcase gases before they are returned to the engine for combustion. It also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipsticks allow quick inspection of collected fluid, and no cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0358-FL Dual Catch Can Kit, Ford Focus ST, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eDesigned specifically for the Ford Focus ST EcoBoost engine, this dual catch can kit provides complete protection for both the PCV and CCV crankcase ventilation systems.\u003c\/p\u003e\n\u003cp\u003eEach catch can functions independently to capture oil vapors, fuel residue, and sludge before they contaminate the intake system, helping maintain cleaner intake components and supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe kit installs using factory mounting locations for a clean OEM-style installation.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePCV Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eCCV Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eVehicle-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eVehicle-specific hoses\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554423759195,"sku":"UAS-RAD-20-0358-FL","price":663.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0358-FL.jpg?v=1783631568"},{"product_id":"radium-engineering-catch-can-kit-crankcase-ford-focus-st-15-18-fluid-lock","title":"Radium Engineering Catch Can Kit Crankcase - Ford Focus ST 15-18 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit Crankcase for Ford Focus ST 15-18 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0357-FL\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2018 Ford Focus ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting holes and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe PCV and CCV catch can kits operate independently and are available separately or together. They do not vent to atmosphere (VTA), making them emissions and track legal. The closed-loop design removes oil and sludge from crankcase gases before they are routed back into the engine for combustion. It also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThis catch can kit mounts on the rear left-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the crankcase breather port.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During high-load operation (WOT), high crankcase flow would normally carry oil and sludge into the air intake pipe.\u003c\/p\u003e\n\u003cp\u003eWithout a catch can, oil contamination can accumulate in the intercooler, reducing heat exchanger efficiency and decreasing engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized laser-cut Focus-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569277264219,"sku":"USA-RAD-20-0357-FL","price":325.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0357-FL.jpg?v=1783708717"},{"product_id":"radium-engineering-catch-can-kit-pcv-ford-f150-and-raptor-ecoboost-v6-15-20-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Ford F150 and Raptor EcoBoost V6 15-20 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for Ford F150 and Raptor EcoBoost V6 15-20 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2022 Ford F-150 3.5L EcoBoost V6 (2WD \u0026amp; 4WD)\u003c\/li\u003e\n\u003cli\u003e2015–2022 Ford Raptor 3.5L EcoBoost V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch can kits are among the most functional and integrated systems available. Each application-specific kit features an 8-ounce billet aluminum catch can with patented Fluid Lock® technology that traps collected oil and prevents it from returning to the intake system.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe catch can mounts to the firewall using factory studs and a vehicle-specific bracket while maintaining easy access to the engine oil dipstick.\u003c\/p\u003e\n\u003cp\u003eThis PCV-side catch can installs inline with the PCV hose, capturing oil and liquid contaminants before they reach the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. It also helps maintain negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for quick and easy inspection of collected fluid. No cutting, drilling, or permanent modifications to the vehicle are required.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne Fluid Lock® catch can with integrated dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum F-150-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003e5\/8-inch Radium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569292271963,"sku":"USA-RAD-20-0481-FL","price":336.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0481-FLn_1.jpg?v=1783710135"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/ford_logo_0e04999b-af63-4a6b-ab3c-f87fbe511634.png?v=1794674042","url":"https:\/\/www.qtparts.fi\/collections\/ford-moottorin-huohotus.oembed","provider":"QT Parts","version":"1.0","type":"link"}