{"title":"Honda - Engine breather","description":null,"products":[{"product_id":"radium-engineering-catch-can-kit-ccv-honda-civic-type-r","title":"Radium Engineering Catch Can Kit - CCV Honda Civic Type-R","description":"\u003ch3\u003eCCV Catch Can Kit for Honda Civic Type R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0425 CCV Catch Can Kit, Honda Civic Type R\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0425 CCV Catch Can Kit fits beneath the factory engine cover without any modifications and mounts to the right-hand engine mount. If an aftermarket engine mount is installed, minor modifications may be required.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the factory crankcase ventilation (CCV) port while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the CCV system experiences atmospheric pressure. Under high engine load (WOT), crankcase gases flow toward the intake system carrying oil vapor and sludge. Without a catch can, these contaminants accumulate in the air intake pipe and intercooler, reducing intercooler thermal efficiency and overall engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components while supporting long-term engine performance and reliability.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531167916379,"sku":"USA-RAD-20-0425","price":370.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/catch-can-kit-ccv-honda-civic-type-r-radium-engineering.jpg?v=1783423078"},{"product_id":"radium-engineering-catch-can-kit-pcv-honda-civic-type-r","title":"Radium Engineering Catch Can Kit - PCV Honda Civic Type-R","description":"\u003ch3\u003ePCV Catch Can Kit for Honda Civic Type R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0424 PCV Catch Can Kit, Honda Civic Type R\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0424 PCV Catch Can Kit is designed for left-hand drive Honda Civic Type R models and mounts to the right-hand firewall using factory mounting points with no vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the factory positive crankcase ventilation (PCV) valve while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or above atmospheric pressure, the factory PCV check valve closes and there is no flow through the PCV hose. During idle, steady-state cruising, and deceleration, manifold vacuum draws crankcase vapors, unburned fuel, and oil contaminants toward the intake manifold. Without a catch can, these contaminants are routed directly into the engine.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components while supporting long-term engine performance and reliability. Because the catch can is fully pressure sealed, no inline check valve is required, allowing direct connection to the intake manifold.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531197964635,"sku":"USA-RAD-20-0424","price":282.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/catch-can-kit-pcv-honda-civic-type-r-radium-engineering.jpg?v=1783423425"},{"product_id":"radium-engineering-dual-catch-can-kit-honda-civic-type-r","title":"Radium Engineering Dual Catch Can Kit - Honda Civic Type-R","description":"\u003ch3\u003eDual Catch Can Kit for Honda Civic Type R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. The PCV and CCV catch cans operate independently to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe system operates as a fully closed-loop design and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe Dual Catch Can Kit provides complete protection for both the positive crankcase ventilation (PCV) and crankcase ventilation (CCV) systems.\u003c\/p\u003e\n\u003cp\u003eEach Fluid Lock® catch can captures oil vapor, moisture, unburned fuel, and other blow-by contaminants before they enter the engine's intake system. By reducing contaminant buildup, the system helps maintain cleaner intake components, improve long-term engine reliability, and preserve engine performance.\u003c\/p\u003e\n\u003cp\u003eThe vehicle-specific mounting system ensures a clean OEM-style installation using factory mounting points.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531302789467,"sku":"USA-RAD-20-0426","price":630.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dual-catch-can-kit-honda-civic-type-r-radium-engineering_1.jpg?v=1783425042"},{"product_id":"radium-engineering-catch-can-kit-pcv-honda-civic-type-r-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Honda Civic Type-R Fluid Lock","description":"\u003ch3\u003ePCV Catch Can Kit for Honda Civic Type R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2017–2021 Honda Civic Type R FK8 (left-hand drive only)\u003c\/li\u003e\n\u003cli\u003e2023+ Honda Civic Type R FL5 (left-hand drive only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe PCV and CCV catch can systems operate independently and are available individually or as a complete dual kit. These closed-loop systems do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0424-FL PCV Catch Can Kit, Honda Civic Type R\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0424-FL PCV Catch Can Kit mounts to the right-hand firewall using factory mounting points with no modifications required.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the factory positive crankcase ventilation (PCV) valve while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and no flow occurs through the PCV hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum that would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components and supporting long-term engine performance.\u003c\/p\u003e\n\u003cp\u003eBecause the Fluid Lock® catch can is pressure sealed, no additional inline check valve is required, allowing direct connection to the intake manifold.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531897233755,"sku":"USA-RAD-20-0424-FL","price":288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0424-FL.jpg?v=1783428640"},{"product_id":"radium-engineering-dual-catch-can-kit-honda-civic-type-r-2017-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Honda Civic Type-R 2017+ Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Honda Civic Type-R 2017+ Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2017–2021 Honda Civic Type-R FK8\u003c\/li\u003e\n\u003cli\u003e2023+ Honda Civic Type-R FL5\u003c\/li\u003e\n\u003cli\u003eLeft-hand drive vehicles only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can system includes independent PCV and CCV catch cans that operate as a fully closed-loop system. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting points and integrate seamlessly with surrounding engine components. Built-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0826-FL Dual Catch Can Kit, 2017+ Honda Civic Type-R\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0826-FL Dual Catch Can Kit combines both the PCV and CCV catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can fits beneath the factory engine cover without modifications and mounts to the right-hand engine mount. It installs inline with the crankcase vent port, capturing oil vapor and blow-by gases before they reach the intake pipe and intercooler. This helps maintain intercooler efficiency and overall engine performance. The crankcase vent lines are routed over the engine and secured to the turbo inlet pipe using temperature-resistant metal tubes.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can captures oil, sludge, and other contaminants from the positive crankcase ventilation system before they enter the intake manifold, helping keep the intake system clean and supporting long-term engine reliability.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for left-hand drive vehicles, this dual catch can kit provides the ultimate level of protection for the Honda Civic Type-R engine.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eCivic Type-R-specific anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom installations\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eCivic Type-R-specific anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom installations\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554286133595,"sku":"USA-RAD-20-0826-FL","price":638.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0826-FL.jpg?v=1783629973"},{"product_id":"radium-engineering-catch-can-kit-honda-s2000-all-rhd-and-06-09-lhd-pcv-fluid-lock","title":"Radium Engineering Catch Can Kit - Honda S2000 all RHD and 06-09 LHD PCV Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for Honda S2000 All Right-Hand Drive and 2006–2009 Left-Hand Drive PCV Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 right-hand drive models\u003c\/li\u003e\n\u003cli\u003e2006–2009 Honda S2000 left-hand drive models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering offers two independent closed-loop catch can systems for the Honda S2000 that can be installed individually or together. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0098-FL PCV Catch Can Kit\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0098-FL PCV Catch Can Kit installs inline with the 3\/8-inch positive crankcase ventilation (PCV) valve.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or above atmospheric pressure, the PCV valve closes and there is no flow through the hose. During idle, low-load cruising, and deceleration, the PCV system experiences metered vacuum, which would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components and improved engine performance. Because the catch can is pressure sealed, it is also suitable for turbocharged and supercharged applications where the PCV system remains connected to the intake manifold.\u003c\/p\u003e\n\u003cp\u003eFor maximum engine protection, Radium Engineering recommends pairing this kit with the 20-0097-FL Crankcase Catch Can Kit or using the complete 20-0099-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eS2000-specific laser-cut powder-coated mounting bracket\u003c\/li\u003e\n\u003cli\u003eUniversal laser-cut powder-coated mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN hose ends\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN adapter fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eOEM spring hose clamps\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554345935195,"sku":"USA-RAD-20-0098-FL","price":361.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0098-FL.jpg?v=1783630650"},{"product_id":"radium-engineering-dual-catch-can-kit-honda-s2000-all-rhd-and-06-09-lhd-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Honda S2000 all RHD and 06-09 LHD Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Honda S2000 All Right-Hand Drive and 2006–2009 Left-Hand Drive Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 right-hand drive models\u003c\/li\u003e\n\u003cli\u003e2006–2009 Honda S2000 left-hand drive models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe Honda S2000 dual catch can system consists of independent PCV and Crankcase catch cans that operate as a closed-loop system. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0099-FL Dual Catch Can Kit\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0099-FL Dual Catch Can Kit combines both the Crankcase and PCV catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe Crankcase catch can installs inline with the 1\/2-inch valve cover breather port. During wide-open throttle (WOT), it captures oil vapors, blow-by gases, and fuel residue before they enter the intake system. For turbocharged and supercharged vehicles, it also helps prevent oil from accumulating in the intercooler and charge piping, preserving cooling efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the 3\/8-inch positive crankcase ventilation (PCV) valve. During idle, low-load cruising, and deceleration, it captures crankcase vapors, unburned fuel, and oil sludge before they enter the intake manifold. Because the Fluid Lock® catch can is pressure sealed, it is suitable for boosted applications where the PCV system remains connected to the intake manifold.\u003c\/p\u003e\n\u003cp\u003eTogether, both catch cans provide the highest level of engine protection while helping maintain cleaner intake components and consistent engine performance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554353176923,"sku":"USA-RAD-20-0099-FL","price":638.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0099-FL.jpg?v=1783630733"},{"product_id":"radium-engineering-dual-catch-can-kit-honda-s2000-00-05-lh-driver-only-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Honda S2000 00-05 LH Driver Only Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Honda S2000 2000–2005 Left-Hand Drive Only Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2000–2005 Honda S2000\u003c\/li\u003e\n\u003cli\u003eLeft-hand drive models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential for protecting a performance engine from crankcase blow-by generated during aggressive driving. Excess oil vapors entering the intake system can reduce performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe Honda S2000 dual catch can system consists of independent PCV and CCV catch cans that operate as a closed-loop system. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0096 Dual Catch Can Kit, Honda S2000\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0096 Dual Catch Can Kit combines both the PCV and Crankcase (CCV) catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the 3\/8-inch positive crankcase ventilation (PCV) valve. During normal driving, it captures oil vapor and sludge before they enter the intake manifold. Because the Fluid Lock® catch can is pressure sealed, it is also suitable for turbocharged and supercharged applications where the PCV system remains connected to the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Crankcase catch can installs inline between the 1\/2-inch valve cover breather port and the air intake pipe. During wide-open throttle (WOT), it captures blow-by gases, oil vapors, and fuel residue before they enter the intake system. On forced induction vehicles, it also helps keep oil out of the intercooler and charge piping.\u003c\/p\u003e\n\u003cp\u003eTogether, both catch cans provide the highest level of engine protection while helping maintain cleaner intake components and consistent engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eS2000-specific anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN hose ends\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN adapter fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eOEM spring hose clamps\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCrankcase Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eS2000-specific laser-cut anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 8AN hose ends and adapter fittings\u003c\/li\u003e\n\u003cli\u003e1\/2-inch PCV rubber hose for custom installations\u003c\/li\u003e\n\u003cli\u003eVacuum and heater hose to replace the factory metal hard tube assembly\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554362843483,"sku":"USA-RAD-20-0096-FL","price":598.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0096-FL.jpg?v=1783630870"},{"product_id":"radium-engineering-catch-can-kit-honda-s2000-all-rhd-and-06-09-lhd-crankcase-fluid-lock","title":"Radium Engineering Catch Can Kit - Honda S2000 all RHD and 06-09 LHD Crankcase Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for Honda S2000 All Right-Hand Drive and 2006–2009 Left-Hand Drive Crankcase Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 right-hand drive models\u003c\/li\u003e\n\u003cli\u003e2006–2009 Honda S2000 left-hand drive models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering offers two independent closed-loop catch can systems for the Honda S2000 that can be installed individually or together. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0097-FL Crankcase Catch Can Kit\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0097-FL Crankcase Catch Can Kit installs inline with the 1\/2-inch valve cover breather port.\u003c\/p\u003e\n\u003cp\u003eDuring low engine loads, the breather system operates under atmospheric pressure. At wide-open throttle (WOT), the breather line experiences vacuum that would normally draw crankcase vapors, unburned fuel, and oil sludge into the air intake system.\u003c\/p\u003e\n\u003cp\u003eFor turbocharged and supercharged vehicles, the catch can helps prevent oil from accumulating in the intercooler and charge piping, preserving intercooler thermal efficiency and maintaining engine performance.\u003c\/p\u003e\n\u003cp\u003eFor maximum engine protection, Radium Engineering recommends pairing this kit with the 20-0098-FL PCV Catch Can Kit or using the complete 20-0099-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eS2000-specific laser-cut powder-coated mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 8AN hose ends and adapter fittings\u003c\/li\u003e\n\u003cli\u003e1\/2-inch PCV rubber hose for custom installations\u003c\/li\u003e\n\u003cli\u003eVacuum and heater hose to replace the factory metal hard tube assembly\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554389975387,"sku":"USA-RAD-20-0097-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0097-FL.jpg?v=1783631190"},{"product_id":"radium-engineering-catch-can-kit-honda-s2000-00-05-crankcase-lh-driver-only-fluid-lock","title":"Radium Engineering Catch Can Kit - Honda S2000 00-05 Crankcase LH Driver Only Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for Honda S2000 2000–2005 Crankcase LH Driver Only Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2000–2005 Honda S2000\u003c\/li\u003e\n\u003cli\u003eLeft-hand drive models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is an essential upgrade for performance vehicles, helping protect the engine from increased crankcase blow-by generated during aggressive driving. Excess oil vapors entering the intake system can reduce performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering offers two independent closed-loop catch can systems for the Honda S2000. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0092 Catch Can Kit, Crankcase, Honda S2000\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0092 Crankcase Catch Can Kit installs inline between the 1\/2-inch valve cover breather port and the air intake pipe.\u003c\/p\u003e\n\u003cp\u003eDuring low engine loads, the system operates under atmospheric pressure. Under high engine loads (WOT), the breather line experiences vacuum, which can draw crankcase vapors, unburned fuel, and oil sludge into the air intake system.\u003c\/p\u003e\n\u003cp\u003eFor turbocharged and supercharged applications, the catch can helps keep oil out of the charge piping, improving intake cleanliness and long-term engine performance.\u003c\/p\u003e\n\u003cp\u003eThe kit is compatible with all factory and aftermarket strut tower braces.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eS2000-specific laser-cut anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 8AN hose ends and adapter fittings\u003c\/li\u003e\n\u003cli\u003e1\/2-inch PCV rubber hose for custom installations\u003c\/li\u003e\n\u003cli\u003eVacuum and heater hose to replace the factory metal hard tube assembly\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554396201307,"sku":"USA-RAD-20-0092-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0092-FL.jpg?v=1783631264"},{"product_id":"radium-engineering-catch-can-kit-ccv-honda-civic-type-r-2017-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Honda Civic Type-R 2017+ Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Honda Civic Type-R 2017+ Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0825-FL Catch Can Kit, CCV, 2017+ Civic Type-R\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2017–2021 Honda Civic Type-R FK8\u003c\/li\u003e\n\u003cli\u003e2023+ Honda Civic Type-R FL5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe PCV and CCV catch can kits operate independently and can be purchased separately or together. They do not vent to atmosphere (VTA), making them emissions and track legal. The closed-loop design removes oil and sludge from crankcase gases before they are routed back into the engine for combustion. It also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for quick and easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe catch can fits beneath the factory engine cover with no modifications required.\u003c\/p\u003e\n\u003cp\u003eIt mounts to the right-hand engine mount. If an aftermarket engine mount is installed, minor modifications may be required.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the crankcase vent port.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the air intake pipe. This oil can accumulate in the intercooler, reducing heat exchanger efficiency and decreasing engine performance.\u003c\/p\u003e\n\u003cp\u003eThe crankcase vent lines are routed over the engine and secured to the turbo inlet pipe using billet clamps and temperature-resistant metal tubing.\u003c\/p\u003e\n\u003ch4\u003e20-0826-FL Dual Catch Can Kit, 2017+ Civic Type-R\u003c\/h4\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2017–2021 Honda Civic Type-R FK8\u003c\/li\u003e\n\u003cli\u003e2023+ Honda Civic Type-R FL5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0826-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit combines both the CCV and PCV catch can systems and is designed for left-hand drive (LHD) vehicles.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum Civic Type-R-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003ePCV hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569269432667,"sku":"USA-RAD-20-0825-FL","price":368.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0825-FL.jpg?v=1783708633"},{"product_id":"radium-engineering-catch-can-kit-honda-s2000-00-05-pcv-lh-driver-only-fluid-lock","title":"Radium Engineering Catch Can Kit - Honda S2000 00-05 PCV LH Driver Only Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for Honda S2000 00-05 PCV LH Driver Only Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by caused by aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to reduced engine performance.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eS2000 Catch Can Kits\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering offers two completely independent oil catch can kits for the Honda S2000 that can be purchased individually or together.\u003c\/p\u003e\n\u003cp\u003eThese kits do not vent to atmosphere (VTA), making them emissions and track legal. The closed-loop design routes filtered air back into the engine for combustion while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eIf purchasing only one kit, the \u003cstrong\u003e20-0093 PCV Catch Can Kit\u003c\/strong\u003e is recommended. For maximum engine protection, especially on turbocharged or supercharged vehicles, the \u003cstrong\u003e20-0096 Dual Catch Can Kit\u003c\/strong\u003e is recommended.\u003c\/p\u003e\n\u003ch4\u003e20-0093 PCV Catch Can Kit\u003c\/h4\u003e\n\u003cp\u003eThe 20-0093 PCV Catch Can Kit runs inline with the 3\/8-inch PCV (Positive Crankcase Ventilation) valve.\u003c\/p\u003e\n\u003cp\u003eOil and sludge can enter the intake manifold through this line during normal driving. Installing a catch can helps reduce contaminants entering the intake manifold, improving engine cleanliness and performance.\u003c\/p\u003e\n\u003cp\u003eBecause Radium catch cans are pressure sealed, they are also suitable for turbocharged and supercharged applications.\u003c\/p\u003e\n\u003ch4\u003ePCV Kit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eRadium S2000-specific anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN hose ends\u003c\/li\u003e\n\u003cli\u003eAnodized -6AN adapter fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eOEM spring hose clamps\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0092 CCV Catch Can Kit\u003c\/h4\u003e\n\u003cp\u003eThe 20-0092 CCV Catch Can Kit runs inline with the 1\/2-inch valve cover breather port and air intake pipe.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads the system experiences atmospheric pressure. Under wide-open throttle (WOT), vacuum is created that would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake pipe.\u003c\/p\u003e\n\u003cp\u003eFor turbocharged or supercharged applications, this catch can helps prevent oil buildup inside the charge piping. This kit is compatible with all strut tower braces.\u003c\/p\u003e\n\u003ch4\u003eCCV Kit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eRadium laser-cut anodized S2000-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum -8AN hose ends and adapter fittings\u003c\/li\u003e\n\u003cli\u003e1\/2-inch PCV rubber hose for custom applications\u003c\/li\u003e\n\u003cli\u003eVacuum and heater hose to replace the OEM metal hard tube\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0096 Dual Catch Can Kit\u003c\/h4\u003e\n\u003cp\u003eThe 20-0096 Dual Catch Can Kit includes both the 20-0092 CCV Catch Can Kit and the 20-0093 PCV Catch Can Kit for complete crankcase ventilation protection.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569299382619,"sku":"USA-RAD-20-0093-FL","price":297.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0093-FL.jpg?v=1783709125"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/honda_233e4bbe-2dbb-48f5-bc55-20a542242a63.png?v=1794674043","url":"https:\/\/www.qtparts.fi\/en-eu\/collections\/honda-moottorin-huohotus.oembed","provider":"QT Parts","version":"1.0","type":"link"}