Home » 1.8T 20V Forged Pistons & Steel Connecting Rod High Boost ULTI Kit Wiseco & BAR-TEK®

1.8T 20V Forged Pistons & Steel Connecting Rod High Boost ULTI Kit Wiseco & BAR-TEK®

SKU: 2218t26
€1.863,59 incl. VAT
Bore

The delivery time for products in stock is 1-3 business days.

If the product is not in stock and it is a pre order product, the average delivery time is 5-21 business days. If the product has a longer delivery time than previously announced, we will be in touch.

Terms for product returns:

  • You must return the ordered products within 14 days of receiving
  • The products must be unused and without damages
  • Commission fee for handling returns is 21,90€
  • For product returns, the customer is in charge of the return costs. Only door to door service (Express)
  • Shipping costs are not refunded

For international orders (outside of Europe) sales are final and non-refundable. Once an order is placed, it cannot be canceled or returned. By placing an order, you acknowledge and agree to these terms.

Return address: QT Parts, Vasarakatu 8B, 37150 Nokia, Finland.

Pre order / made-to-order products

If the product you have ordered is a pre order or made-to-order item, it is not subject to the 14-day right of withdrawal or return under consumer protection laws, as the product is manufactured or sourced specifically based on the customer’s individual order.

If you wish to cancel your order before receiving the product, we will refund 50% of the total order amount.

This condition applies to the following product categories:

  • Suspension
  • Engine Tuning
  • Engine Parts
  • Exhaust Systems
  • Fueling
  • Turbochargers/superchargers
  • Drivetrain
  • ECE-approved Downpipes

All of the above products are manufactured or sourced individually based on the customer’s order, and therefore cannot be returned after delivery, unless the product has a manufacturing or material defect.

In the event of such a defect, the standard liability for defects as provided by consumer protection legislation shall apply.

this kit is made for you if you are really serious about increasing performance. Our ULTIMATE kit contains everything you need to make you and your engine happy: power up to 800 hp with your 1.8T 20V engine!

Perfectly tuned: 1.8T ULTIMATE Kit for up to 800 hp power

Whenever you think you can't go any further, think of this kit. Because here we have once again outdone ourselves. The ULTIMATE Kit is not called that for nothing! It gives you everything you need for the best performance from your 1.8T: a perfectly matched combination of forged pistons, connecting rods, connecting rod bolts, connecting rod bearings, head gasket and stud bolt.

Visually alone, this set can do it all: Our BAR-TEK® ® X-shaft steel connecting rods. The matching forged pistons from Wiseco are also available. All other parts are also of the highest quality: ARP connecting rod bolts, connecting rod bearings from ACL, MLS head gasket from Cometic and ARP stud bolt for the main bearing race and cylinder head.

That's really all you need Not only do these components harmonize perfectly with each other, but you too clay money as a set compared to buying them individually!

Extreme kit for extreme performance

Of course, our kit is not only an eye-catcher, but is also designed for extreme performance. With this kit, you can achieve up to 800 hp with your 1.8T without any worries! This is because we only pack the best components into our Ultimate Kit and they are optimally matched to each other .

The Wiseco piston in this kit are coated on the shirt for extreme performance and are also quite light. This combination is of course perfect for Motorsports . The piston comes with everything you need for installation: bolts, rings and clips.

Our X-shaft steel connecting rods are also extremely light and at the same time very stable . Thanks to their surface, they can easily withstand the high pressure loads. They are milled from solid material and have an additional hole for better piston pin lubrication (rifle drilled). They also come with everything you need for assembly: the matching ARP2000 expansion bolts and assembly paste.

These two parts are the stars of the kit and are rounded off by high-performance bolts, racing bearings and the like. As I said, more is simply not possible !

Features of the high performance piston:

  • Extremely light thanks to special alloy
  • Reinforced for maximum performance
  • Also for 81 mm standard bore
  • 20 mm stinger pin
  • Installation and bore dimensions enclosed

Features of the X-shaft conrods:

  • high-strength milled from solid material
  • suitable for extreme power increases from 800 hp
  • extremely light and very stable
  • Magnaflux inspected
  • 4 pieces per set
  • Dimensions: 144 x 21 mm
  • Weight per conrods with screws only approx. 600 grams
  • With oil riser bore for piston pin lubrication (rifle drilled)
  • precisely angled and tested in-house
  • WITH ARP 2000 expansion bolts 3/8"

Features of the ACL connecting rod bearings:

  • Racing bearings, ACL Race
  • extra coated
  • extra bore for the piston pin

Features of the APR stud bolt for the block and head:

  • A MUST for all engines that run with increased boost pressure!
  • The most important Pins from the world market leader ARP.
  • The stud bolts are made from 8740 chromoly steel and have rounded threads.
  • Up to 40% Stronger than standard bolts.
  • All ARP high performance stud kits include ARP paste.
  • Additional ARP screws for the bearing blocks

Features of the Cometic MLS head gasket

  • Multi-layer metal head gasket
  • 1.14mm for an optimum compression ratio of 8.5:1

In any case, we recommend Reinforcing the valve drive with our valve springs and Ferrea/Supertech valves. You can find them further down at accessories.