QT Parts on Suomalainen verkkokauppa.

Varastomme sijaitsee Nokialla, Pirkanmaalla.

Voit tarvittaessa noutaa tilauksesi meiltä. Valitse kassalla "nouto".

Voit maksaa ostoksesi turvallisesti monipuolisilla maksutavoilla.

Myös lasku ja osamaksu. (Klarna)

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.   Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

Yli 350€ tilaukset ilmaisella toimituksella (PostNord)

• Hyväksymme palautuksia 14 päivän ajan lähetyksen vastaanottamisesta.
• Tuotteen tulee olla käyttämätön ja myyntikelpoinen.
• Palautuksen käsittelymaksu 21,90€ yli 200€ tilauksissa.

Tilaustuotteet ja mittatilaustuotteet

Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.

Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.

Tämä ehto koskee seuraavia tuotekategorioita:

• Alusta
• Engine Tuning
• Jäähdytys (pois lukien QT Parts)
• Moottorin osat
• Pakoputkistot
• Polttoaine
• Turboahtimet
• Voimansiirto
• ECE-hyväksytyt downpipet

Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.

Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.

Airmatic Lowering Links - Audi A7 C8

Adjustable lowering links for the Audi A7 C8 with original adaptive air suspension.

With adjustable lowering links, the ride height of the Audi A7 C8's front and rear axles can be precisely adjusted, creating a balanced, refined stance for the car. The system utilizes the car's original suspension structure, and installation does not require coding or a separate electronic control module.

Lowering is achieved by changing the mechanical reference point of the height sensors. After installation, the ride height can be easily fine-tuned directly on the car.

Key Benefits

• Complete vehicle-specific kit: The package includes the necessary lowering links for both the front and rear axles.
• Adjustable while installed: The counter-threaded adjustment design allows fine-tuning of the link length from the center adjuster without removing the links from the car.
• Corrosion-resistant construction: Precision-machined aluminum adjusters are combined with stainless steel link ends and ball joint mounts, designed for demanding undercarriage operating conditions.
• Secured mechanical fastening: Lock nuts keep the adjusted length in place, and double metal safety clips ensure the ball joints remain in the original height sensor mounting points.
• No coding or electronic module: The mechanical reference point of the height sensor is directly altered using lowering links without changes to the car's electrical system.
• Reversible to original: The original sensor links can be reinstalled, allowing the car to be returned to its original configuration.

Lowering Range – Audi A7 C8

The front and rear axle heights can be fine-tuned independently as applicable.

The actual final ride height depends, among other things, on the car's original calibration, the active suspension mode, the car's load, tire pressures, and wheel and tire size.

When significantly lowering the vehicle, always check the clearance between the tire and body structures, the suspension travel, and the car's suitability for the road network to be used.

Technical Specifications

Operating Principle

Factory-installed height sensors measure the suspension position using mechanical links. When the original fixed-length sensor links are replaced with adjustable lowering links, the mechanical reference transmitted to the height sensor changes.

The suspension control unit interprets this altered position data and adjusts the car's height accordingly. This way, the car's static ride height can be lowered without software changes, coding, or a separate module affecting the electrical signal.

The car's original automatic ride height adjustment and selectable suspension modes remain operational.

However, the chosen lowering height affects the suspension's available travel, wheel alignment, and handling. Therefore, the final adjustment should be made according to the car's actual use and the tire-wheel combination used.

Compatibility

Designed for the following Audi application:

• Audi A7 C8 (2018–)

Compatibility requires that the car has original adaptive air suspension.

If there is any doubt about the suspension configuration or compatibility, the vehicle's VIN number or exact suspension equipment should be checked before ordering.

Package Includes

• Complete vehicle-specific lowering link kit
• Stainless steel link ends and ball joint mounts
• Lock nuts
• Metal safety clips
• Vehicle-specific installation and basic adjustment instructions

Installation and Adjustment

Installation time for an experienced installer is typically around 60–90 minutes.

Installation should be performed on a level surface and in accordance with the car manufacturer's instructions for air suspension and lifting. Original height sensors and their mounts should be handled with care.

Before adjustment, it is advisable to measure the car's initial height. The length of the lowering links should be adjusted in small, even increments to achieve the desired height ratio for the front and rear axles.

Once the desired ride height is achieved and the suspension has settled, the following should be checked:

• wheel alignment
• clearance between tires and body structures
• suspension travel
• secure locking of lowering links and mounts

Incorrect installation or excessive lowering can cause uneven tire wear, reduced suspension travel, or contact with surrounding structures.

Adjustable lowering links offer a precise and mechanically simple way to finalize the Audi A7 C8's ride height without coding – while preserving the functionality of the car's original air suspension.