Home » Audi 2.5 TFSI Evo EA855 EV980 Upgrade MPI Injector Set

Audi 2.5 TFSI Evo EA855 EV980 Upgrade MPI Injector Set

SKU: TTE10185
€559,37 incl. VAT

The delivery time for products in stock is 1-3 business days.

If the product is not in stock and it is a pre order product, the average delivery time is 5-21 business days. If the product has a longer delivery time than previously announced, we will be in touch.

Terms for product returns:

  • You must return the ordered products within 14 days of receiving
  • The products must be unused and without damages
  • Commission fee for handling returns is 21,90€
  • For product returns, the customer is in charge of the return costs. Only door to door service (Express)
  • Shipping costs are not refunded

For international orders (outside of Europe) sales are final and non-refundable. Once an order is placed, it cannot be canceled or returned. By placing an order, you acknowledge and agree to these terms.

Return address: QT Parts, Vasarakatu 8B, 37150 Nokia, Finland.

Pre order / made-to-order products

If the product you have ordered is a pre order or made-to-order item, it is not subject to the 14-day right of withdrawal or return under consumer protection laws, as the product is manufactured or sourced specifically based on the customer’s individual order.

If you wish to cancel your order before receiving the product, we will refund 50% of the total order amount.

This condition applies to the following product categories:

  • Suspension
  • Engine Tuning
  • Engine Parts
  • Exhaust Systems
  • Fueling
  • Turbochargers/superchargers
  • Drivetrain
  • ECE-approved Downpipes

All of the above products are manufactured or sourced individually based on the customer’s order, and therefore cannot be returned after delivery, unless the product has a manufacturing or material defect.

In the event of such a defect, the standard liability for defects as provided by consumer protection legislation shall apply.

SHARP MOTORSPORT A UDI 2.5 TFSI EVO DAZA, ​​DNWA, DNWC EA855 UPGRADE MPI 980CC INJECTOR SET

Providing the extra fuel needed for when wanting to get the most on the dual-injected EA855 Engine, replacing the original MPI injectors

The perfect choice when using a TTE700, TTE777 Upgrade turbocharger, or other big frame turbos available.

Tuning partners considered the best in Europe tested many injectors before deciding on these as the best option of choice.

Perfect choice for APR, BEVO, DVX, BRP, UNITRONIC, JD ENGINEERING, software calibration options.

 

Genuine UK Sourced Bosch Motorsport Injectors

Batch color matched sets (blue, red, orange)

All-New Generation Bosch fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.

Will maintain consistency to a minimum Pulse width of only 1.5 ms.
Excellent low pulse width response with predictable response down to 2ms.

 

Excellent atomisation for modern multi-valve engines.

 

  • Set of 5 Injectors
  • Set of 5 Wiring harness adapters
  • BOSCH EV14 Based Injectors
  • Precision Cut Atomiser
  • Loom Adapters included
  • 7 point multi hole
  • High Impedance
  • Excellent response characteristics
  • 980cc/min = 670g/min = 89lb/hr @ 3bar approx
  • 12-ohm resistance
  • Petrol & E85 compatible
  • Plug & Play
  • Needs Specific Software Adjustment
  • Color batch matched set
  • Not sold as a flow matched set (Same as APR & UNITRONIC)

Static max flow in test environment:

 

29 PSI (2 bar) 720cc/min = 69 lb/h
43.5 PSI (3 bar) 900cc/min = 86 lb/hr
58 PSI (4 bar) 1038cc/min = 99 lb/h
78.5 PSI (5 bar) 1170cc/min = 111 lb/h
88 PSI (6 bar) 1284cc/min = 122 Ib/hr
101.5PSI (7bar) 1344cc/min = 128lb/h

Note that any test environment versus practical use can have various results depending on Peripherals and other technical factors. However, this is very good info on what to expect from the injectors and can be used as basic information when choosing other components for the fuel system such as fuel pump, fuel pressure regulator and fuel filter.

 THESE ARE NOT TO REPLACE THE DIRECT PORT INJECTORS!