CANchecked MFD15 Gen2 - Universal Data Display

QT Parts on Suomalainen verkkokauppa.

Varastomme sijaitsee Nokialla, Pirkanmaalla.

Voit tarvittaessa noutaa tilauksesi meiltä. Valitse kassalla "nouto".

Voit maksaa ostoksesi turvallisesti monipuolisilla maksutavoilla.

Myös lasku ja osamaksu. (Klarna)

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.   Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

Yli 350€ tilaukset ilmaisella toimituksella (PostNord)

• Hyväksymme palautuksia 14 päivän ajan lähetyksen vastaanottamisesta.
• Tuotteen tulee olla käyttämätön ja myyntikelpoinen.
• Palautuksen käsittelymaksu 21,90€ yli 200€ tilauksissa.

Tilaustuotteet ja mittatilaustuotteet

Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.

Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.

Tämä ehto koskee seuraavia tuotekategorioita:

• Alusta
• Engine Tuning
• Jäähdytys (pois lukien QT Parts)
• Moottorin osat
• Pakoputkistot
• Polttoaine
• Turboahtimet
• Voimansiirto
• ECE-hyväksytyt downpipet

Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.

Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.

With the CANchecked MFD15 Gen2 universal gauge, you can see all the most important engine and vehicle values on one screen.

The MFD15 Gen2 is equipped with an OLED display, offering excellent readability even in direct sunlight. Its 52mm outer diameter fits into CANchecked's vehicle-specific mounts and most gauge bezels on the market. The device is operated via two buttons on the front panel or with an optionally available rotary encoder.

Key Features

• Compact Design: 52mm diameter and a depth of only 12.5mm.
• Front Panel LED Indicator: functions as a shift light and/or warning light.
• CAN Bus Support: supports engine control units using CAN bus, custom CAN data streams, as well as OBD2 and extended VAG vehicle data from 2008 onwards.
• WiFi Connectivity: connect to a smartphone or computer and configure settings with the web application.
• Additional Inputs: connect up to six analog sensors or, alternatively, an ethanol sensor* directly to the display.
• Pre-set Alarms: easily activate and modify pre-set alarms, for example, a warning if exhaust gas temperature exceeds 900 °C.
• Customizability: add your own startup logo and color scheme.
• Online Data Logging (Live Logging)*: record sensor data to a phone or computer for later analysis.
• Flex Fuel Support:* display ethanol content and fuel temperature.
• CAN Switching:* control CAN switches with the display's buttons and forward analog input data to the CAN bus.

Display Modes

You can create up to eight different display pages and choose suitable views for them:

• Analog Gauge Display
• Two Values
• Gear Display
• Four Values View
• Six Values View
• Bar + Two Values
• Circular Gauge View
• Dual Bar Display
• Performance Meter
• Vertical Bar Display (1–6 values)
• Single Value

Configuring Settings with oDSS Software

A new feature of the MFD15 Gen2 is its WiFi connectivity, allowing the device to be configured directly via smartphone or computer.

With oDSS software, you can:

• configure all device settings
• record measurement data (Live Logging license required)
• upload your own startup image
• update the device software

Supported Values

One of the most common questions is: "What values can I read from the engine control unit?"

The answer is: all values that the ECU sends via the CAN bus.

The MFD15 Gen2 supports the standards ISO 11898-2 and SAE J2284.

The engine control unit manufacturer determines what data is sent on the CAN bus. Documentation or a DBC file facilitates setup, and CANchecked also offers a wide range of pre-configured ECU profiles. Depending on the manufacturer, up to 64 different sensor values can be read.

The device also supports OBD2 queries via CAN bus (11-bit and 29-bit) and vehicle-specific protocols such as UDS and TP2.

Pre-supported Systems

• OBD2 (11-bit and 29-bit)
• Ecumaster Classic
• Ecumaster Black
• VAG PQ34
• Haltech v2
• LinkECU
• MaxxECU
• Motec M1
• Emtron
• Megasquirt 2
• Megasquirt 3

If your desired ECU is not listed, a suitable TRI/TRX file can be downloaded or requested from CANchecked's database.

In-depth VAG Data Support

In VAG vehicles manufactured from 2008 onwards (and in some cases older ones), significantly more data can be read than with a standard OBD2 connection, for example:

• oil temperature
• boost pressure
• transmission temperature
• cylinder-specific ignition timing correction
• high- and low-pressure fuel system values
• wastegate control
• as well as numerous other data.

Integrated LED

The internal LED can be configured as either a shift light or a warning light.

Shift Light

You can define:

• up to 8 different colors
• RPM limits
• the RPM at which the LED starts to flash.

Warning Light

Minimum and maximum values can be defined for each sensor.

When a value falls below or exceeds the set limit, the LED flashes in the selected color. During warning mode, the shift light is disabled.

Scope of Delivery

The package includes:

• MFD15 Gen2 display
• Quick Start Guide
• Connector B (6-pin Molex)
• Connector C (12-pin Molex)
• Pre-installed color-coded wires (20 cm):
  • operating voltage
  • CAN bus
  • analog inputs
  • 5 V
  • sensor ground
• Crimp connectors
• Two 1 kΩ resistors for NTC sensors

Analog Inputs

Almost any sensor can be connected to the six analog inputs.

Supported types include:

• linear 0–5 V sensors
• NTC temperature sensors

Calibrations for CANchecked's own sensors are pre-saved:

A ready-made 4-pin AIN cable can be used for connection.

An ethanol sensor can be connected directly to the display if the required license* is used.

Accessories

• CC22501 ETK01 – external rotary encoder, with 50 cm Plug & Play cable
• CC22100 CBD08 – 8-port CAN distribution hub
• CC22780 ANC04 – 4-channel AIN cable
• CC22902 NTC01 – fluid temperature sensor 1/8" NPT
• CC22903 TCC01 – K-type temperature sensor 0–1250 °C
• CC22901 FLP01 – pressure sensor 0–10 bar (145 psi), M10x1
• CC22900 BST10 – pressure sensor 6.5 bar relative (95 psi)

Licenses

Live Logging

With the Live Logging license, the display records all sensor data to the oDSS software.

The recorded log can be transferred to a computer or phone for analysis.

Note: With OBD and UDS connections, only the values visible on the display are recorded.

Flex Fuel

With the ethanol sensor license, the sensor can be connected directly to the display.

Connection requires a 10 kΩ pull-up resistor between 5 V and the signal.

The display can show:

• ethanol content
• fuel temperature

The data can also be recorded in the log.

CAN Switching and AIN Forwarding

With this license, you can:

• control CAN switches with the display's buttons or rotary encoder
• forward analog input voltage signals directly to the CAN bus.