Forge Motorsport Induction Kit - Renault Megane RS 280/300 2016-2021

QT Parts is a Finnish online store.

Our warehouse is located in Nokia, Finland.

You can collect your order directly from us if needed. Simply select “Pickup” at checkout.

Pay securely with multiple payment methods, including invoice and installment plans through Klarna.

The delivery time for products in stock is 1-5 business days. We ship worldwide.

If the product is not in stock and it is a pre order product, the average delivery time is 5-21 business days. If the product has a longer delivery time than previously announced, we will be in touch. International orders may be subject to VAT, import duties, and customs fees upon arrival in the destination country.

Terms for product returns:

• You must return the ordered products within 14 days of receiving
• The products must be unused and without damages
• Commission fee for handling returns is 21,90€
• For product returns, the customer is in charge of the return costs. Only door to door service (Express)
• Shipping costs are not refunded

For international orders sales are final and non-refundable. Once an order is placed, it cannot be canceled or returned. By placing an order, you acknowledge and agree to these terms.

Return address: QT Parts, Vasarakatu 8B, 37150 Nokia, Finland.

Pre order / made-to-order products

If the product you have ordered is a pre order or made-to-order item, it is not subject to the 14-day right of withdrawal or return under consumer protection laws, as the product is manufactured or sourced specifically based on the customer’s individual order.

If you wish to cancel your order before receiving the product, we will refund 50% of the total order amount.

This condition applies to the following product categories:

• Suspension
• Engine Tuning
• Engine Parts
• Exhaust Systems
• Fueling
• Turbochargers/superchargers
• Drivetrain
• ECE-approved Downpipes

All of the above products are manufactured or sourced individually based on the customer’s order, and therefore cannot be returned after delivery, unless the product has a manufacturing or material defect.

In the event of such a defect, the standard liability for defects as provided by consumer protection legislation shall apply.

Forge Motorsport Renault Megane RS 280/300 - Intake

The Renault Megane RS 280/300 intake has been designed based on extensive engineering tests, dyno measurements, and flow analyses. The development focused on three main goals:

• Low intake air temperatures compared to other aftermarket intakes
• Improved airflow
• Stylish appearance that completes the engine bay's look

Optimal intake air temperature

The first goal was achieved by placing the PRORam filter in a CAD-designed aluminum intake housing. The original intake housing is located at the rear of the engine bay, where temperatures can easily rise high. Therefore, special attention was paid to preventing hot air entry and providing the most effective thermal protection for the intake housing.

Both original OE air ducts have been retained in the design to ensure the most efficient cold air flow to the filter. The aim of these solutions is to keep the intake air temperature (IAT) as low as possible.

More efficient airflow

The second goal was achieved by testing and comparing several different air filters. To ensure the reliability of the measurement results, the tests were performed on two independent dynamometers.

Test results showed that the best performance benefits were achieved with the PRORam Performance air filter.

Unlike many other aftermarket intakes, this system utilizes a large velocity stack air guide, inside which the air filter is positioned. The filter uses high-quality, high-flow synthetic nanofiber filter material, which is pleated to maximize the filtration surface area. This allows for greater airflow to the turbocharger.

Measured performance benefits

Measurement results show a clear performance improvement. The Forge Motorsport intake achieved a +15 hp power increase, even though the ambient temperature in the dynamometer measurement room increased by 3 °C during the test.

The greatest performance improvement was achieved by combining FMINDK31 and FMTIA4 components. The test was conducted during the hottest part of the day, but an impressive +20 hp power increase was still achieved.

At the same time, torque increased especially at lower revolutions, which improves the engine's throttle response and reactivity.

For comparison, a competing intake system available on the market was also tested. It was also found to perform well, highlighting the importance of an efficient and free-flowing filtration solution in this vehicle.

The test vehicle used was a Renault Megane RS 280 Cup, which had K-Tec Stage 1 programming, a performance exhaust system, and a sport catalytic converter.

Tests were conducted on Litchfield's Maha dynamometer. In addition, measurements were taken at Performance Remap's VTEC all-wheel-drive dynamometer in Gloucestershire. The use of two independent dynamometers allowed for cross-referencing results and ensuring the reliability of the measurements.

Stylish and refined design

In addition to performance, the goal has been to improve the appearance of the engine bay. The design has emphasized functionality above all else, but the end result was also intended to be subtle, high-quality, and purposeful.

The black, textured powder-coated finish gives the intake housing an OEM-level finish.

The cold air side of the intake housing has been left open to enhance airflow and to showcase the large PRORam filter.

From the first use, the finish of the structure and the quality of the materials are evident. Details such as the precisely machined MAF sensor mounting housing and laser-cut precision fasteners highlight the high manufacturing quality.

Better performance and a sportier sound profile

Thanks to more efficient airflow, in addition to increased performance, the engine's sound profile becomes slightly sportier.

Forge Motorsport offers a lifetime warranty for the components of the intake kit, which does not cover the air filter.

Compatibility

A frequently asked question is whether the intake is compatible with turbo inlet hoses from other manufacturers.

Yes. The system can be combined with inlet hoses from other manufacturers, and it is also compatible with the original Renault inlet hose.

Technical features

• MAF sensor mounting housing, made from 6082 aircraft-grade aluminum
• Black anodization and powder coating for optimal protection and durability
• PRORam Performance air filter with high-quality, high-flow synthetic nanofiber filter material
• Pleated filter design maximizes filtration surface area and airflow
• No engine malfunction light (EML)
• Improved airflow
• Forge Motorsport silicone hoses
• High-quality fluorosilicone inner liner integrated into the silicone hoses
• Suitable for use with modern long-life coolants and OAT (Organic Acid Technology) coolants
• Fluorosilicone inner layer is also suitable for air containing oil mist
• Hose construction is designed to exceed the performance and durability of original OEM hoses
• Improves the technical functionality and appearance of the engine bay
• Lifetime warranty