KW V1 Coilover Suspension - BMW F-Series 3/4-Series xDrive

KW V1 coilover kit

Sporty driving feel combined with a striking appearance. With factory pre-set damping.

The KW V1 coilover kit is our entry-level solution for increased driving pleasure with an attractive and individually adjustable lowering. High-quality finish, stainless steel shock absorbers, corrosion-resistant springs, bump stops, and compatible components guarantee long-lasting driving enjoyment – not just for the life of the car.

Continuously adjustable lowering

With the KW V1 coilover suspension, you achieve maximum lowering within the tested adjustment range. Depending on the vehicle model, this varies between 30–70 mm or 50–90 mm. The height can be easily adjusted even years later thanks to the dirt-repellent trapezoidal thread and composite adjustment nut. Front axle lowering is done with a one-piece composite height adjuster. The same solution is used on the rear axle, unless the car has separate springs and shock absorbers. The included rear height adjuster is installed either above or below the spring.

The benchmark for tuning enthusiasts

The KW V1 coilover meets the demands of sporty drivers with its harmonious basic setup. Our engineers develop individual damping and spring rates for each car model to achieve an optimal balance between sportiness and practicality. So you're not just buying any chassis kit, but a KW coilover developed specifically for your vehicle type. As a manufacturer, KW uses only its own resources, high-quality components, and the same damping technology as major series manufacturers. With the KW V1 suspension, body roll under load is reduced, and you get more precise steering and a sportier driving experience.

Trust our experience

We have been a market leader and innovator in individual chassis and suspension solutions for road and track use for over 25 years. Car enthusiasts, car manufacturers, and tuning professionals worldwide trust KW coilovers – Made in Germany. Every KW suspension kit is developed and manufactured in Fichtenberg, Germany, and undergoes extensive stress tests to meet our high quality standards. We offer a 2-year warranty on our products, which can be extended up to 5 years when installed by an authorized KW dealer. Our over 4600 suspension solutions exceed OEM quality standards.

• Optimally pre-adjusted
• Sporty and comfortable damping technology
• Stainless steel "inox-line" construction
• Individual height adjustment
• Tested adjustment range
• Complete, easy-to-install kit
• High-quality components for a long lifespan
• Comprehensive documentation for easy use

Adjustment – factory pre-set damping

The KW V1 coilover suspension has a vehicle-specific, fixed damping adjustment. The springs and shock absorbers are perfectly matched to achieve an optimal balance between sportiness and driving comfort.

Under full load and maximum axle weights, the dampers always operate with a sporty characteristic. The KW V1 is particularly popular among tuning enthusiasts whose focus is on Show & Shine events.

Lowering: Front 25-55mm, Rear 35-60mm.

Compatibility

BMW 3 Series (F30, F80) – 11/2011–10/2018

• 320d xDrive (120–140 kW, 1995 ccm, Diesel, Sedan, AWD)
• 320i xDrive (134–135 kW, 1997–1998 ccm, Petrol, Sedan, AWD)
• 328i xDrive (179 kW, 1997 ccm, Petrol, Sedan, AWD)
• 330d xDrive (190–210 kW, 2993 ccm, Diesel, Sedan, AWD)
• 330i xDrive (185 kW, 1998 ccm, Petrol, Sedan, AWD)
• 335d xDrive (230 kW, 2993 ccm, Diesel, Sedan, AWD)
• 335i xDrive (225–250 kW, 2979 ccm, Petrol, Sedan, AWD)
• 340i xDrive (240–265 kW, 2998 ccm, Petrol, Sedan, AWD)

BMW 4 Series Coupé (F32, F82) – 07/2013–06/2020

• 420d xDrive (120–140 kW, 1995 ccm, Diesel, Coupé, AWD)
• 430d xDrive (190–210 kW, 2993 ccm, Diesel, Coupé, AWD)
• 430i xDrive (183 kW, 1998 ccm, Petrol, Coupé, AWD)
• 435d xDrive (230 kW, 2993 ccm, Diesel, Coupé, AWD)
• 435i xDrive (225–250 kW, 2979 ccm, Petrol, Coupé, AWD)
• 440i xDrive (240–265 kW, 2998 ccm, Petrol, Coupé, AWD)