Home » Radium Engineering Catch Can Kit - Honda S2000 all RHD and 06-09 LHD PCV Fluid Lock

Radium Engineering Catch Can Kit - Honda S2000 all RHD and 06-09 LHD PCV Fluid Lock

SKU: USA-RAD-20-0098-FL
€361,00 incl. VAT

QT Parts is a Finnish online store.

Our warehouse is located in Nokia, Finland.

You can collect your order directly from us if needed. Simply select “Pickup” at checkout.

Pay securely with multiple payment methods, including invoice and installment plans through Klarna.

The delivery time for products in stock is 1-5 business days. We ship worldwide.

If the product is not in stock and it is a pre order product, the average delivery time is 5-21 business days. If the product has a longer delivery time than previously announced, we will be in touch. International orders may be subject to VAT, import duties, and customs fees upon arrival in the destination country.

Terms for product returns:

  • You must return the ordered products within 14 days of receiving
  • The products must be unused and without damages
  • Commission fee for handling returns is 21,90€
  • For product returns, the customer is in charge of the return costs. Only door to door service (Express)
  • Shipping costs are not refunded

For international orders sales are final and non-refundable. Once an order is placed, it cannot be canceled or returned. By placing an order, you acknowledge and agree to these terms.

Return address: QT Parts, Vasarakatu 8B, 37150 Nokia, Finland.

Pre order / made-to-order products

If the product you have ordered is a pre order or made-to-order item, it is not subject to the 14-day right of withdrawal or return under consumer protection laws, as the product is manufactured or sourced specifically based on the customer’s individual order.

If you wish to cancel your order before receiving the product, we will refund 50% of the total order amount.

This condition applies to the following product categories:

  • Suspension
  • Engine Tuning
  • Engine Parts
  • Exhaust Systems
  • Fueling
  • Turbochargers/superchargers
  • Drivetrain
  • ECE-approved Downpipes

All of the above products are manufactured or sourced individually based on the customer’s order, and therefore cannot be returned after delivery, unless the product has a manufacturing or material defect.

In the event of such a defect, the standard liability for defects as provided by consumer protection legislation shall apply.

Catch Can Kit for Honda S2000 all RHD and 06-09 LHD PCV Fluid Lock Radium Engineering

FEATURES
-Effectively raises the octane and increased engine performance from cleaner inlet air 
-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. 
-Excessive oil collection can be an indicator of a damaged engine.
-Lowers hydrocarbon emissions 
-Capacity: 7 fluid ounces 
-Height (without fittings): 5 inches 
-Outside Diameter: 2.45 inches 

S2000 CATCH CAN KITS
Radium Engineering offers two independent S2000 oil catch can kits that are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering into the cabin.

The 20-0097-FL Crankcase Catch Can Kit runs inline with the 1/2" valve cover breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process.

The 20-0098-FL PCV Catch Can Kit comes with 2 mounting brackets. One bracket will be disregarded depending if the crankcase vent kit will also be used. This catch can runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, low load cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.
 
For the ultimate in engine protection, Radium recommends the S2000 20-0099-FL Dual Catch Can Kit (shown below) which utilizes both the "Crankcase" catch can and "PCV" catch can.

20-0098-FL PCV Kit Includes:
-Radium billet oil catch can with integrated condenser and dipstick
-Radium S2000-specific laser cut powder coated mounting bracket
-Radium universal laser cut powder coated mounting bracket
-Anodized aluminum -6AN hose ends 
-Anodized 6AN adapter fittings  
-Stainless steel mounting hardware
-OEM spring hose clamps 
-3/8" PCV rubber hose  

Instruction PDF