{"title":"Audi R8 - Exhaust Systems","description":"","products":[{"product_id":"armytrix-titanium-valvetronic-exhaust-system-audi-r8-v8-mki-facelift-2013-2015","title":"Armytrix Titanium Valvetronic Exhaust System - Audi R8 V8 MKI Facelift 2013-2015","description":"\u003cp\u003eARMYTRIX believes each supercar deserves an Ultimate Lightweight \"aero-grade\" Titanium exhaust for the best performance and exhaust sounds upgrades, not just a heavy steel made exhaust systems. ARMYTRIX has spent hundreds of hours of development and sound tuning to unlock the perfect combination of exhaust tone, sound volume and practicality. The Valved exhaust system which was specifically designed to unlock power Hidden in the 4.2L\/5.2L engine and produce a much more aggressive and characteristic exhaust sound. Another great benefit of the R8 system is that it' so much lighter than the factory exhaust, shaving nearly 21 kilograms of dead weight from the rear of the car, ARMYTRIX achieved this by using aero-grade Titanium throughout the entire system and of course, the Titanium racing exhaust delivers the best sound for each individual owner at all revs without needing manual switching; this is an unmatched piece of performance engineering. ARMYTRIX exhaust systems differ from other brands' exhaust systems with their unique \"Throttle Pedal Sensor and Engine RPM Signal Auto Functions\". Through this system ARMYTRIX offers car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp \u0026amp; torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike anything you have experienced before.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Titanium x-Pipe Mufflers\u003c\/li\u003e\n\n\u003cli\u003e Valvetronic Tail Pipe Section\u003c\/li\u003e\n\n\u003cli\u003e Remote Control Module\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Power (HP): 16.6\u003c\/li\u003e\n\n\u003cli\u003e Torque (Nm): 18.1\u003c\/li\u003e\n\n\u003cli\u003e Weight Saving (-Kg): 21.5\u003c\/li\u003e\n\n\u003cli\u003e Aero-Grade Titanium\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eAUR82 Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Audi R8 V8 4.2L FSI 2014-2015\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e For Instructions\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.armytrixusa.com\/catalog\/productdocs\/vr\/1179\/2024\/AUR8V8V10.pdf\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e ARMYTRIX wireless valvetronic wiring is a plug-and-play system, no cutting, alteration or damage will be done to the factory settings. \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ccenter\u003e\n\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/BDckBTNURFc\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/tY0nF3DLxIw\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\n\u003c\/center\u003e\n\u003ccenter\u003e\n\n\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-banner.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:\u003c\/strong\u003e \u003cspan\u003eAs an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eThe Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the Smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or Smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open\/close the exhaust valve based on a predetermined RPM range or throttle position.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eAside from getting a Brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also allow the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending on whether you are running an open or closed boost cycle, resulting in more horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-remote.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-app.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-dongle.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-decibel.jpg\" alt=\"\" width=\"100%\"\u003e\n\n\u003c\/center\u003e","brand":"QT Parts","offers":[{"title":"Well Tips","offer_id":48962464842075,"sku":"AUR82-C","price":8993.0,"currency_code":"EUR","in_stock":true},{"title":"True Titanium Blue","offer_id":48962451210587,"sku":"AUR82-DT16B","price":9884.0,"currency_code":"EUR","in_stock":true},{"title":"Matte Black","offer_id":48962451276123,"sku":"AUR82-DT16M","price":10211.0,"currency_code":"EUR","in_stock":true},{"title":"Carbon Fiber","offer_id":48962451308891,"sku":"AUR82-DC16","price":10094.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/AUR82-C.png?v=1725471528"},{"product_id":"armytrix-titanium-valvetronic-exhaust-system-audi-r8-v10-5-2l-fsi-2014-2015","title":"Armytrix Titanium Valvetronic Exhaust System - Audi R8 V10 5.2L FSI 2014-2015","description":"\u003cp\u003eARMYTRIX believes each supercar deserves an Ultimate Lightweight \"aero-grade\" Titanium exhaust for the best performance and exhaust sounds upgrades, not just a heavy steel made exhaust systems. ARMYTRIX has spent hundreds of hours of development and sound tuning to unlock the perfect combination of exhaust tone, sound volume and practicality. The Valved exhaust system which was specifically designed to unlock power Hidden in the 4.2L\/5.2L engine and produce a much more aggressive and characteristic exhaust sound. Another great benefit of the R8 system is that it' so much lighter than the factory exhaust, shaving nearly 21 kilograms of dead weight from the rear of the car, ARMYTRIX achieved this by using aero-grade Titanium throughout the entire system and of course, the Titanium racing exhaust delivers the best sound for each individual owner at all revs without needing manual switching; this is an unmatched piece of performance engineering. ARMYTRIX exhaust systems differ from other brands' exhaust systems with their unique \"Throttle Pedal Sensor and Engine RPM Signal Auto Functions\". Through this system ARMYTRIX offers car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp \u0026amp; torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike anything you have experienced before.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Titanium x-Pipe Mufflers\u003c\/li\u003e\n\n\u003cli\u003e Valvetronic Tail Pipe Section\u003c\/li\u003e\n\n\u003cli\u003e Remote Control Module\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Power (HP): 16.6\u003c\/li\u003e\n\n\u003cli\u003e Torque (Nm): 18.1\u003c\/li\u003e\n\n\u003cli\u003e Weight Saving (-Kg): 21.5\u003c\/li\u003e\n\n\u003cli\u003e Aero-Grade Titanium\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Audi R8 V10 5.2L FSI 2014-2015\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e For Instructions\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.armytrixusa.com\/catalog\/productdocs\/vr\/1179\/2024\/AUR8V8V10.pdf\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e ARMYTRIX wireless valvetronic wiring is a plug-and-play system, no cutting, alteration or damage will be done to the factory settings. \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ccenter\u003e\n\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/j_6j1-SRYZU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/K79lnwYrLqQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\n\u003c\/center\u003e\n\u003ccenter\u003e\n\n\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-banner.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:\u003c\/strong\u003e \u003cspan\u003eAs an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eThe Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the Smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or Smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open\/close the exhaust valve based on a predetermined RPM range or throttle position.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eAside from getting a Brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also allow the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending on whether you are running an open or closed boost cycle, resulting in more horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-remote.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-app.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-dongle.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-decibel.jpg\" alt=\"\" width=\"100%\"\u003e\n\n\u003c\/center\u003e","brand":"QT Parts","offers":[{"title":"Well Tips","offer_id":48962476278107,"sku":"AUR12-C","price":8993.0,"currency_code":"EUR","in_stock":true},{"title":"True Titanium Blue","offer_id":48962476310875,"sku":"AUR12-DT16B","price":9884.0,"currency_code":"EUR","in_stock":true},{"title":"Matte Black","offer_id":48962476343643,"sku":"AUR12-DT16M","price":10211.0,"currency_code":"EUR","in_stock":true},{"title":"Carbon Fiber","offer_id":48962476376411,"sku":"AUR12-DC16","price":10094.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/AUR12-C.png?v=1725471923"},{"product_id":"armytrix-titanium-valvetronic-catback-exhaust-system-dual-carbon-tips-audi-r8-v10-mki-2009-2012","title":"Armytrix Titanium Valvetronic Catback Exhaust System Dual Carbon Tips - Audi R8 V10 MKI 2009-2012","description":"\u003cp id=\"products_description\"\u003eEnhance your Audi R8 by adding the ARMYTRIX Valvetronic Titanium Exhaust System. This system will increase power, reduce weight, and improve sound. This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is significant, adding a deep resonant sporty sound, but at the same time neutralizes the annoying frequencies in the most critical rpm range. Complete the look with a set of four sporty chrome polished silver tailpipes. ARMYTRIX exhaust systems differ from other brand's exhaust systems with their unique \"Throttle Pedal Sensor and Engine RPM Signal Auto Functions\". Through this system ARMYTRIX offers car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp \u0026amp; torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike anything you have experienced before. When car owners turn on the race mode (valves opened), the gas goes through the section of straight pipes. This is where you get the Incredible race sound and performance gain. In full throttle and it's straight pipe all the way, which means you will be expecting the LOUDEST sound performance you've ever heard!\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Titanium Series x-pipe mufflers\u003c\/li\u003e\n\n\u003cli\u003e Valvetronic tail pipe section\u003c\/li\u003e\n\n\u003cli\u003e Wireless remote control kits (OWRC)\u003c\/li\u003e\n\n\u003cli\u003e Dual Carbon tips\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Audi R8 V10 MKI 2009-2012\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e For Instructions\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.armytrixusa.com\/catalog\/productdocs\/vr\/1179\/2024\/AUR8V8V10.pdf\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e \n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ccenter\u003e\n\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/UOn-zlpszRs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/d4DqWZhfwc4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\n\u003c\/center\u003e\n\u003ccenter\u003e\n\n\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-banner.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:\u003c\/strong\u003e \u003cspan\u003eAs an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eThe Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the Smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or Smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open\/close the exhaust valve based on a predetermined RPM range or throttle position.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eAside from getting a Brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also allow the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending on whether you are running an open or closed boost cycle, resulting in more horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-remote.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-app.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-dongle.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-decibel.jpg\" alt=\"\" width=\"100%\"\u003e\n\n\u003c\/center\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":48962505310555,"sku":"AUR11-DC15","price":10094.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/AUR11-DC15.png?v=1725472317"},{"product_id":"armytrix-stainless-steel-valvetronic-exhaust-system-dual-carbon-tips-audi-r8-v10-mk1-coupe-spider-2009-2012","title":"Armytrix Stainless Steel Valvetronic Exhaust System Dual Carbon Tips - Audi R8 V10 MK1 Coupe Spider 2009-2012","description":"\u003cp id=\"products_description\"\u003eEnhance your Audi R8 by adding the ARMYTRIX Stainless Steel Exhaust System. This system will increase power, reduce weight, and improve sound. This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is significant, adding a deep resonant sporty sound, but at the same time neutralizes the annoying frequencies in the most critical rpm range. ARMYTRIX exhaust systems differ from other brand's exhaust systems with their unique \"Throttle Pedal Sensor and Engine RPM Signal Auto Functions\". Through this system ARMYTRIX offers car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase air flow for better performance (hp \u0026amp; torque gained) and sound. Car owners can set their own timing for valves to automatically open and close by engine rpm and how deep they press the gas pedal. It's a new innovative system that brings your car to a different level. With the ARMYTRIX you are not getting just an exhaust system, you are getting a driving system unlike anything you have experienced before. When car owners turn on the race mode (valves opened), the gas goes through the section of straight pipes. This is where you get the Incredible race sound and performance gain. In full throttle and it's straight pipe all the way, which means you will be expecting the LOUDEST sound performance you'll ever hear!\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Power: +20.7HP\u003c\/li\u003e\n\n\u003cli\u003e Torque: +22.3Nm\u003c\/li\u003e\n\n\u003cli\u003e Weight: -21.7kg\u003c\/li\u003e\n\n\u003cli\u003e Dual Carbon Tips\u003c\/li\u003e\n\n\u003cli\u003e X-pipe mufflers (AUR11S-VM)\u003c\/li\u003e\n\n\u003cli\u003e Valvetronic tail pipe section (AUR1S-VTL+AUR1S-VTR)\u003c\/li\u003e\n\n\u003cli\u003e Wireless remote control kits (OWRC)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e For Instructions\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.armytrixusa.com\/catalog\/productdocs\/vr\/1179\/2024\/AUR8V8V10.pdf\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e \n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ccenter\u003e\n\n\u003ciframe width=\"320\" height=\"180\" src=\"https:\/\/www.youtube.com\/embed\/UOn-zlpszRs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003ciframe width=\"320\" height=\"180\" src=\"https:\/\/www.youtube.com\/embed\/YMuI3t3_sXA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\n\u003c\/center\u003e\n\u003ccenter\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-banner.jpg\" alt=\"\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eAs an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes.\u003c\/p\u003e\n\n \u003cp\u003eThe Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the Smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or Smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open\/close the exhaust valve based on a predetermined RPM range or throttle position.\u003c\/p\u003e\n\n \u003cp\u003eAside from getting a Brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also allow the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending on whether you are running an open or closed boost cycle, resulting in more horsepower. \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-remote.jpg\" alt=\"\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-app.jpg\" alt=\"\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-dongle.jpg\" alt=\"\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-decibel.jpg\" alt=\"\" width=\"100%\"\u003e\u003c\/p\u003e\n\n\n\u003c\/center\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":48962510651739,"sku":"AUR11S-DC15","price":7591.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/AUR11S-C.png?v=1725472411"},{"product_id":"armytrix-stainless-steel-valvetronic-catback-exhaust-system-audi-r8-v8-mki-2007-2012","title":"Armytrix Stainless Steel Valvetronic Catback Exhaust System - Audi R8 V8 MKI 2007-2012","description":"\u003cp id=\"products_description\"\u003eStep up and take over with ARMYTRIX. A system designed for pure power and sound production, delivers it all in high quality workmanship with user friendly versatility. Accelerating the exhaust flow without sacrificing efficiency, you reap the rewards of improved HP and torque outputs and flooding the frequencies with deafening audio; marking your territory and declaring your dominance. Technology-wise, keep up with the rapidly evolving world or risk being on the list of the extinct. Arm yourself with our revolutionary road tech for a smarter driving experience. The valvetronic system introduces a new dimension of versatility; never compromise between sound and stealth. The ARMYTRIX exclusive OBDII dongle system reduces the installation time by 50%! With clear displays and user-friendly controls, navigate through our Smartphone app to attain an Insightful look into the vehicle's real-time operational status and complete control over the valve settings. Stay Connected, Stay Ahead of the Pack. Performance-wise, deviate from the routine path; go on an Adventure down the road less traveled. Let the ARMYTRIX kickstart the real Automotive experience. We have tailored each exhaust for carrying the maximum payload to be delivered to thunderous effect. Our streamlined system is lighter, rid of the OE deadweight and offers an unrestrictive flow; the improved efficiency plays a vital role in the dramatic improvements in both horsepower and torque. Celebrate the Liberation of performance, write your own legacy. Quality-wise, ARMYTRIX wouldn't be what we are today, if not for the persistence in offering premier quality Exhausts to the users. Started from the initial designing process, attention to detail was essential in laying the foundation for creating Exhausts with perfect fitment. Veteran craftsmen bring the blueprints to life with unparalleled skills; each weld administered by steady hands, creating the Unbreakable bond, the backbone to greater outputs. Feed your appetite for extra performance through our TI and SS series exhausts, rebel against mediocrity and take back the initiative.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e x-pipe mufflers\u003c\/li\u003e\n\n\u003cli\u003e Valvetronic tail pipe section\u003c\/li\u003e\n\n\u003cli\u003e Wireless remote control kits\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Audi R8 V8 MK1 2007-2012\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e For Instructions\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.armytrixusa.com\/catalog\/productdocs\/vr\/1179\/2024\/AUR8V8V10.pdf\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e \n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ccenter\u003e\n\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/332_0HE5PuU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/pEB0V7FzK7A\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\n\u003c\/center\u003e\n\u003ccenter\u003e\n\n\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-banner.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eARMYTRIX VALVETRONIC: HOW IT WORKS- BRIEF OVERVIEW:\u003c\/strong\u003e \u003cspan\u003eAs an ARMYTRIX fan, customer, or potential customer, you have likely heard of Valvetronic. It's one of the prominent selling features of ARMYTRIX exhaust systems and has shifted the entire exhaust industry towards adopting similar technology in all exhaust systems. The whole point of the Valvetronic system is to give you an option for how loud you want your car to be. If you leave early in the morning for work, you probably don't want your car to be excessively loud, as it will upset your neighbors. Once you're out on the open road or shredding a canyon road, you want to hear those awesome noises your car makes.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eThe Valvetronic system allows you to switch between being quiet and being loud with the push of a button via the included remote or through the Smartphone application; this works by tapping into a vacuum source on your engine and connecting it to the control module. When you press the button on the remote or Smartphone application, you are communicating with the OBDII module via Bluetooth. This OBDII module tells the exhaust valve module to allow the engine vacuum to open or close the exhaust valve. You can also set the exhaust valve module to an automatic mode which will open\/close the exhaust valve based on a predetermined RPM range or throttle position.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eAside from getting a Brutal sound with the Valvetronic system open, you can also gain power, especially if your car is turbocharged. Depending on the car, modifications, and tune you have, the valve being open will also allow the exhaust gas to flow more freely, as it does not have to pass through any muffler. If your vehicle is turbocharged, you may see a slight increase in boost pressure depending on whether you are running an open or closed boost cycle, resulting in more horsepower.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-remote.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-app.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-dongle.jpg\" alt=\"\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.armytrixusa.com\/images\/armytrix-valve-decibel.jpg\" alt=\"\" width=\"100%\"\u003e\n\n\u003c\/center\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":48962515632475,"sku":"AUR81S-C","price":6491.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/AUR81S-C.png?v=1725472499"},{"product_id":"cobra-sport-valved-catback-exhaust-audi-r8-4-2-v8-fsi-gen-1-pre-facelift-07-13","title":"Cobra Sport Valved Catback Exhaust - Audi R8 4.2 V8 FSI Gen 1 (Pre-Facelift) (07-13)","description":"\u003cp data-end=\"206\" data-start=\"36\"\u003eThis exhaust system for the Audi R8 is made of stainless steel tubing and replaces the entire rear section from the catalytic converters back.\u003c\/p\u003e\n\u003cp data-end=\"429\" data-start=\"208\"\u003eThe piping retains the use of vacuum-controlled exhaust flaps. The valves open and close in response to engine speed, just like the original system.\u003c\/p\u003e\n\u003cp data-end=\"603\" data-start=\"431\"\u003eThe exhaust system includes remote controls that allow the flaps to be opened and closed. The flaps can also be controlled using the car's original flap control system.\u003c\/p\u003e\n\u003cp data-end=\"669\" data-start=\"605\"\u003eAll necessary fasteners and gaskets are included.\u003c\/p\u003e\n\u003cp\u003eAudi R8 4.2 V8 (Gen 1) Promotional Video (Valved Cat Back Exhaust)\u003c\/p\u003e\n\u003cdiv class=\"c-video\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uDrkReqjrgA?rel=0\" data-loaded=\"true\" width=\"560\" height=\"315\" data-src=\"https:\/\/www.youtube.com\/embed\/uDrkReqjrgA?rel=0\" class=\"js-lazyload js-lazyload--loaded\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eAudi R8 4.2 V8 (Gen 1) Exhaust Sound (Valved Cat Back Exhaust)\u003c\/p\u003e\n\u003cdiv class=\"c-video\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/SpSaRLnM7Co\" data-loaded=\"true\" width=\"560\" height=\"315\" data-src=\"https:\/\/www.youtube.com\/embed\/SpSaRLnM7Co\" class=\"js-lazyload js-lazyload--loaded\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":51834493796699,"sku":"AU101","price":3424.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/Audi-R8-5-2-CobraSportExhaust.png?v=1764665461"},{"product_id":"cobra-sport-valved-catback-exhaust-audi-r8-5-2-v10-gen-1-facelift-13-15","title":"Cobra Sport Valved Catback Exhaust - Audi R8 5.2 V10 Gen 1 (Facelift) (13-15)","description":"\u003cp data-end=\"206\" data-start=\"36\"\u003eThis exhaust system for the Audi R8 is made of stainless steel and replaces the entire rear section from the catalytic converters back.\u003c\/p\u003e\n\u003cp data-end=\"429\" data-start=\"208\"\u003eThe piping retains the use of vacuum-controlled exhaust flaps. The valves open and close in response to engine speed, just like the original system.\u003c\/p\u003e\n\u003cp data-end=\"603\" data-start=\"431\"\u003eThe exhaust system includes remote controls that allow the flaps to be opened and closed. The flaps can also be controlled using the car's original flap control system.\u003c\/p\u003e\n\u003cp data-end=\"669\" data-start=\"605\"\u003eAll necessary fasteners and seals are included.\u003c\/p\u003e\n\u003cdiv class=\"c-video\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudi R8 5.2 V10 (Gen 1) Promotional Video (Valved Cat Back Exhaust)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"c-video\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/g_sM2gutW-4\" data-loaded=\"true\" width=\"560\" height=\"315\" data-src=\"https:\/\/www.youtube.com\/embed\/g_sM2gutW-4\" class=\"js-lazyload js-lazyload--loaded\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eAudi R8 5.2 V10 (Gen 1) Exhaust Sound (Valved Cat Back Exhaust)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"c-video\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/feOuhDDNG50\" data-loaded=\"true\" width=\"560\" height=\"315\" data-src=\"https:\/\/www.youtube.com\/embed\/feOuhDDNG50\" class=\"js-lazyload js-lazyload--loaded\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":51834500448603,"sku":"AU109","price":3424.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/Audi-R8-5-2-V10-Facelift-Valved-Cobra-Exhaust.png?v=1764665434"},{"product_id":"milltek-cat-back-exhaust-audi-r8-v10-5-2-plus-coupe-spyder-2016-2019","title":"Milltek Cat Back Exhaust - Audi R8 V10 5.2 Plus Coupe \u0026 Spyder 2016-2019","description":"\u003cp data-start=\"302\" data-end=\"639\"\u003e The Milltek Sport Cat Back exhaust system is designed for Audi R8 V10 Plus models with \u003cstrong data-start=\"393\" data-end=\"443\"\u003ethe 5.2-liter naturally aspirated V10 engine\u003c\/strong\u003e . This exhaust system replaces the section after the catalytic converter and brings out the unique character of the R8 engine in a cleaner, more powerful and sportier way – without compromising on drivability.\u003c\/p\u003e\n\n\u003cp data-start=\"641\" data-end=\"804\"\u003e The Cat Back solution improves exhaust flow and allows the V10 engine to breathe more freely, making the driving experience even more enjoyable.\u003c\/p\u003e\n\n\u003ch2 data-start=\"811\" data-end=\"861\"\u003e \u003cstrong data-start=\"814\" data-end=\"861\"\u003eThe authentic sound of a free-breathing V10\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"863\" data-end=\"973\"\u003e Milltek has tuned this system to emphasize the high-revving and mechanical nature of the Audi R8 V10: \u003c\/p\u003e\n\n\u003cul data-start=\"975\" data-end=\"1132\"\u003e\n\n\u003cli data-start=\"975\" data-end=\"1027\"\u003e\n\n\u003cp data-start=\"977\" data-end=\"1027\"\u003e \u003cstrong data-start=\"977\" data-end=\"1025\"\u003eDeeper and fuller sound at idle\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1028\" data-end=\"1074\"\u003e\n\n \u003cp data-start=\"1030\" data-end=\"1074\"\u003e\u003cstrong data-start=\"1030\" data-end=\"1072\"\u003eSporty sound as the load increases\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1075\" data-end=\"1132\"\u003e\n\n\u003cp data-start=\"1077\" data-end=\"1132\"\u003e \u003cstrong data-start=\"1077\" data-end=\"1132\"\u003eNo annoying resonance or drone when driving on the road\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1134\" data-end=\"1243\"\u003e The sound is clearly sportier than standard, but retains the R8's premium refinement.\u003c\/p\u003e\n\n\u003ch2 data-start=\"1250\" data-end=\"1289\"\u003e \u003cstrong data-start=\"1253\" data-end=\"1289\"\u003eImproved flow and ride feel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"1291\" data-end=\"1322\"\u003e Milltek Cat Back Exhaust System: \u003c\/p\u003e\n\n\u003cul data-start=\"1324\" data-end=\"1528\"\u003e\n\n\u003cli data-start=\"1324\" data-end=\"1361\"\u003e\n\n\u003cp data-start=\"1326\" data-end=\"1361\"\u003e reduces exhaust back pressure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1362\" data-end=\"1413\"\u003e\n\n\u003cp data-start=\"1364\" data-end=\"1413\"\u003e supports the engine's sensitive throttle response \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1414\" data-end=\"1468\"\u003e\n\n\u003cp data-start=\"1416\" data-end=\"1468\"\u003e enhances exhaust gas flow throughout the entire rev range \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1469\" data-end=\"1528\"\u003e\n\n\u003cp data-start=\"1471\" data-end=\"1528\"\u003e emphasizes engine speed sensitivity and sound purity\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1530\" data-end=\"1606\"\u003e The freer-flowing design is perfectly suited to the characteristics of the V10 engine.\u003c\/p\u003e\n\n\u003ch2 data-start=\"1613\" data-end=\"1641\"\u003e \u003cstrong data-start=\"1616\" data-end=\"1641\"\u003eDirect bolt-on installation\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"1643\" data-end=\"1671\"\u003e The exhaust system is designed: \u003c\/p\u003e\n\n\u003cul data-start=\"1673\" data-end=\"1856\"\u003e\n\n\u003cli data-start=\"1673\" data-end=\"1737\"\u003e\n\n\u003cp data-start=\"1675\" data-end=\"1737\"\u003e to fit directly into the original mounting points of the Audi R8 \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1738\" data-end=\"1794\"\u003e\n\n\u003cp data-start=\"1740\" data-end=\"1794\"\u003e for installation without welding or permanent changes \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1795\" data-end=\"1856\"\u003e\n\n\u003cp data-start=\"1797\" data-end=\"1856\"\u003e to preserve the car's original systems and structures\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n \u003cp data-start=\"1858\" data-end=\"1927\"\u003eOEM-level fit ensures a clean and unobtrusive finish.\u003c\/p\u003e\n\n\u003ch2 data-start=\"1934\" data-end=\"1979\"\u003e \u003cstrong data-start=\"1937\" data-end=\"1979\"\u003e304L Aircraft Grade Stainless Steel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"1981\" data-end=\"2089\"\u003e The entire system is made of high-quality \u003cstrong data-start=\"2031\" data-end=\"2074\"\u003e304L grade stainless steel\u003c\/strong\u003e , which offers: \u003c\/p\u003e\n\n\u003cul data-start=\"2091\" data-end=\"2268\"\u003e\n\n\u003cli data-start=\"2091\" data-end=\"2139\"\u003e\n\n\u003cp data-start=\"2093\" data-end=\"2139\"\u003e excellent corrosion and heat resistance \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2140\" data-end=\"2180\"\u003e\n\n\u003cp data-start=\"2142\" data-end=\"2180\"\u003e long service life even under hard driving conditions \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2181\" data-end=\"2221\"\u003e\n\n\u003cp data-start=\"2183\" data-end=\"2221\"\u003e flow-optimized internal structure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2222\" data-end=\"2268\"\u003e\n\n\u003cp data-start=\"2224\" data-end=\"2268\"\u003e carefully finished TIG welds\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2270\" data-end=\"2344\"\u003e The material and workmanship meet Milltek's premium quality standards.\u003c\/p\u003e\n\n\u003ch2 data-start=\"2351\" data-end=\"2366\"\u003e \u003cstrong data-start=\"2354\" data-end=\"2366\"\u003eFit\u003c\/strong\u003e \u003c\/h2\u003e\n\n\u003cul data-start=\"2418\" data-end=\"2478\"\u003e\n\n\u003cli data-start=\"2418\" data-end=\"2448\"\u003e\n\n\u003cp data-start=\"2420\" data-end=\"2448\"\u003e \u003cstrong data-start=\"2420\" data-end=\"2446\"\u003eAudi R8 V10 Plus Coupe\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2449\" data-end=\"2478\"\u003e\n\n\u003cp data-start=\"2451\" data-end=\"2478\"\u003e \u003cstrong data-start=\"2451\" data-end=\"2478\"\u003eAudi R8 V10 Plus Spyder\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2480\" data-end=\"2551\"\u003e Engine: \u003cstrong data-start=\"2490\" data-end=\"2523\"\u003e5.2 V10 (naturally aspirated)\u003c\/strong\u003e\u003cbr data-start=\"2523\" data-end=\"2526\"\u003e Model years \u003cstrong data-start=\"2538\" data-end=\"2551\"\u003e2016–2019\u003c\/strong\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":51920937091419,"sku":"MIL-SSXAU743","price":3702.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/SSXAU743_1_61fbd39f-b56c-4a96-822f-f5726f6547dd.png?v=1766051662"},{"product_id":"milltek-opf-back-exhaust-audi-r8-v10-5-2-gen-2-2020-2025","title":"Milltek OPF Back Exhaust - Audi R8 V10 5.2 Gen 2 2020-2025","description":"\u003cp data-start=\"375\" data-end=\"766\"\u003e The Milltek Sport \u003cstrong data-start=\"389\" data-end=\"430\"\u003eParticulate Filter-back exhaust system\u003c\/strong\u003e is designed for Audi R8 V10 Gen 2 models with \u003cstrong data-start=\"486\" data-end=\"536\"\u003ea 5.2-liter naturally aspirated V10 engine\u003c\/strong\u003e and a factory-fitted \u003cstrong data-start=\"557\" data-end=\"584\"\u003eOPF\/GPF particulate filter\u003c\/strong\u003e . This system replaces the section of the exhaust system \u003cstrong data-start=\"632\" data-end=\"662\"\u003eafter the particulate filter\u003c\/strong\u003e , improving exhaust flow and sound while retaining the original emissions system.\u003c\/p\u003e\n\n\u003cp data-start=\"768\" data-end=\"952\"\u003e The Particulate Filter-back solution offers a distinctly sportier sound and improved flow without compromising daily drivability or the operation of the car's systems.\u003c\/p\u003e\n\n\u003ch2 data-start=\"959\" data-end=\"1023\"\u003e \u003cstrong data-start=\"962\" data-end=\"1023\"\u003eThe clean and controlled sound of the free-breathing V10\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n \u003cp data-start=\"1025\" data-end=\"1144\"\u003eMilltek has tuned this system to emphasize the high-revving and mechanical nature of the Audi R8 V10 engine: \u003c\/p\u003e\n\n\u003cul data-start=\"1146\" data-end=\"1303\"\u003e\n\n\u003cli data-start=\"1146\" data-end=\"1198\"\u003e\n\n\u003cp data-start=\"1148\" data-end=\"1198\"\u003e \u003cstrong data-start=\"1148\" data-end=\"1196\"\u003eDeeper and fuller sound at idle\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1199\" data-end=\"1245\"\u003e\n\n\u003cp data-start=\"1201\" data-end=\"1245\"\u003e \u003cstrong data-start=\"1201\" data-end=\"1243\"\u003eSporty sound as the load increases\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1246\" data-end=\"1303\"\u003e\n\n\u003cp data-start=\"1248\" data-end=\"1303\"\u003e \u003cstrong data-start=\"1248\" data-end=\"1303\"\u003eNo annoying resonance or drone when driving on the road\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1305\" data-end=\"1442\"\u003e The sound profile retains the R8's premium refinement, but brings out the character of the V10 engine much more strongly than the original.\u003c\/p\u003e\n\n\u003ch2 data-start=\"1449\" data-end=\"1488\"\u003e \u003cstrong data-start=\"1452\" data-end=\"1488\"\u003eImproved flow and ride feel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"1490\" data-end=\"1528\"\u003e Particulate Filter-back exhaust system: \u003c\/p\u003e\n\n\u003cul data-start=\"1530\" data-end=\"1765\"\u003e\n\n\u003cli data-start=\"1530\" data-end=\"1594\"\u003e\n\n\u003cp data-start=\"1532\" data-end=\"1594\"\u003e reduces exhaust back pressure after the particulate filter \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1595\" data-end=\"1646\"\u003e\n\n\u003cp data-start=\"1597\" data-end=\"1646\"\u003e supports the engine's sensitive throttle response \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1647\" data-end=\"1701\"\u003e\n\n\u003cp data-start=\"1649\" data-end=\"1701\"\u003e enhances exhaust gas flow throughout the entire rev range \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1702\" data-end=\"1765\"\u003e\n\n\u003cp data-start=\"1704\" data-end=\"1765\"\u003e emphasizes the V10 engine's rev sensitivity and sound purity\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1767\" data-end=\"1855\"\u003e The freer-flowing structure supports the natural functioning of the engine without side effects.\u003c\/p\u003e\n\n \u003ch2 data-start=\"1862\" data-end=\"1890\"\u003e\u003cstrong data-start=\"1865\" data-end=\"1890\"\u003eDirect bolt-on installation\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp data-start=\"1892\" data-end=\"1953\"\u003e The Milltek Particulate Filter-back exhaust system is designed to: \u003c\/p\u003e\n\n\u003cul data-start=\"1955\" data-end=\"2173\"\u003e\n\n\u003cli data-start=\"1955\" data-end=\"2031\"\u003e\n\n\u003cp data-start=\"1957\" data-end=\"2031\"\u003e to fit directly into the original mounting points of the Audi R8 Gen 2 model \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2032\" data-end=\"2103\"\u003e\n\n\u003cp data-start=\"2034\" data-end=\"2103\"\u003e for installation without welding or permanent structural changes \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2104\" data-end=\"2173\"\u003e\n\n\u003cp data-start=\"2106\" data-end=\"2173\"\u003e to preserve the car's original systems and functionalities\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2175\" data-end=\"2244\"\u003e OEM-level fit ensures a clean and unobtrusive finish.\u003c\/p\u003e\n\n\u003ch2 data-start=\"2251\" data-end=\"2296\"\u003e \u003cstrong data-start=\"2254\" data-end=\"2296\"\u003e304L Aircraft Grade Stainless Steel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"2298\" data-end=\"2406\"\u003e The entire system is made of high-quality \u003cstrong data-start=\"2348\" data-end=\"2391\"\u003e304L grade stainless steel\u003c\/strong\u003e , which offers: \u003c\/p\u003e\n\n\u003cul data-start=\"2408\" data-end=\"2588\"\u003e\n\n\u003cli data-start=\"2408\" data-end=\"2456\"\u003e\n\n\u003cp data-start=\"2410\" data-end=\"2456\"\u003e excellent corrosion and heat resistance \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2457\" data-end=\"2500\"\u003e\n\n\u003cp data-start=\"2459\" data-end=\"2500\"\u003e long service life even in demanding driving \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2501\" data-end=\"2541\"\u003e\n\n\u003cp data-start=\"2503\" data-end=\"2541\"\u003e flow-optimized internal structure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2542\" data-end=\"2588\"\u003e\n\n\u003cp data-start=\"2544\" data-end=\"2588\"\u003e carefully finished TIG welds\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2590\" data-end=\"2664\"\u003e The material and workmanship meet Milltek's premium quality standards.\u003c\/p\u003e\n\n\u003ch2 data-start=\"2671\" data-end=\"2686\"\u003e \u003cstrong data-start=\"2674\" data-end=\"2686\"\u003eFit\u003c\/strong\u003e \u003c\/h2\u003e\n\n\u003cul data-start=\"2753\" data-end=\"2823\"\u003e\n\n\u003cli data-start=\"2753\" data-end=\"2788\"\u003e\n\n \u003cp data-start=\"2755\" data-end=\"2788\"\u003e\u003cstrong data-start=\"2755\" data-end=\"2786\"\u003eAudi R8 V10 5.2 Gen 2 Coupe\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2789\" data-end=\"2823\"\u003e\n\n\u003cp data-start=\"2791\" data-end=\"2823\"\u003e \u003cstrong data-start=\"2791\" data-end=\"2823\"\u003eAudi R8 V10 5.2 Gen 2 Spyder\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2825\" data-end=\"2939\"\u003e Engine: \u003cstrong data-start=\"2835\" data-end=\"2868\"\u003e5.2 V10 (naturally aspirated)\u003c\/strong\u003e\u003cbr data-start=\"2868\" data-end=\"2871\"\u003e Only for \u003cstrong data-start=\"2876\" data-end=\"2911\"\u003eOPF\/GPF equipped models\u003c\/strong\u003e\u003cbr data-start=\"2911\" data-end=\"2914\"\u003e Model years \u003cstrong data-start=\"2926\" data-end=\"2939\"\u003e2020–2025\u003c\/strong\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":51920944103771,"sku":"MIL-SSXAU958","price":2853.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/SSXAU958_1_0cbe3c73-0835-419c-a572-c0f782d41826.png?v=1766051758"},{"product_id":"milltek-cat-back-exhaust-audi-r8-v8-4-2fsi-non-resonated-2007-2012","title":"Milltek Cat Back Exhaust - Audi R8 V8 4.2FSI Non Resonated 2007-2012","description":"\u003cp data-start=\"353\" data-end=\"672\"\u003e The Milltek Sport \u003cstrong data-start=\"367\" data-end=\"407\"\u003eCat Back Non-Resonated exhaust system\u003c\/strong\u003e is designed for Audi R8 V8 4.2 FSI Quattro models with a naturally aspirated V8 engine. This system replaces the section of the exhaust system after the catalytic converter and provides a significantly sportier and more open sound than the original exhaust system.\u003c\/p\u003e\n\n\u003cp data-start=\"674\" data-end=\"867\"\u003e The Non-Resonated design eliminates mid-range damping, further freeing up sound and flow – the perfect choice for the driver who wants the R8 V8 engine to sound clear and pure.\u003c\/p\u003e\n\n\u003ch2 data-start=\"874\" data-end=\"937\"\u003e \u003cstrong data-start=\"877\" data-end=\"937\"\u003ePowerful and clean sound of a free-breathing V8\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"939\" data-end=\"1053\"\u003e Milltek has tuned this exhaust system to bring out the character of the Audi R8 V8 engine in a genuine and sporty way: \u003c\/p\u003e\n\n\u003cul data-start=\"1055\" data-end=\"1212\"\u003e\n\n\u003cli data-start=\"1055\" data-end=\"1107\"\u003e\n\n\u003cp data-start=\"1057\" data-end=\"1107\"\u003e \u003cstrong data-start=\"1057\" data-end=\"1105\"\u003eDeeper and fuller sound at idle\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1108\" data-end=\"1154\"\u003e\n\n \u003cp data-start=\"1110\" data-end=\"1154\"\u003e\u003cstrong data-start=\"1110\" data-end=\"1152\"\u003eSporty sound as the load increases\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1155\" data-end=\"1212\"\u003e\n\n\u003cp data-start=\"1157\" data-end=\"1212\"\u003e \u003cstrong data-start=\"1157\" data-end=\"1212\"\u003eNo annoying resonance or drone when driving on the road\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1214\" data-end=\"1340\"\u003e The Non-Resonated structure brings more openness and presence to the sound while maintaining a controlled and usable overall sound.\u003c\/p\u003e\n\n\u003ch2 data-start=\"1347\" data-end=\"1386\"\u003e \u003cstrong data-start=\"1350\" data-end=\"1386\"\u003eImproved flow and ride feel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"1388\" data-end=\"1433\"\u003e Milltek Cat Back Non-Resonated Exhaust System: \u003c\/p\u003e\n\n\u003cul data-start=\"1435\" data-end=\"1643\"\u003e\n\n\u003cli data-start=\"1435\" data-end=\"1472\"\u003e\n\n\u003cp data-start=\"1437\" data-end=\"1472\"\u003e reduces exhaust back pressure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1473\" data-end=\"1524\"\u003e\n\n\u003cp data-start=\"1475\" data-end=\"1524\"\u003e supports the engine's sensitive throttle response \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1525\" data-end=\"1579\"\u003e\n\n\u003cp data-start=\"1527\" data-end=\"1579\"\u003e enhances exhaust gas flow throughout the entire rev range \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1580\" data-end=\"1643\"\u003e\n\n\u003cp data-start=\"1582\" data-end=\"1643\"\u003e emphasizes the rev sensitivity and mechanical sound of the V8 engine\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1645\" data-end=\"1741\"\u003e The freer-flowing design is ideally suited to the characteristics of a naturally aspirated V8 engine.\u003c\/p\u003e\n\n\u003ch2 data-start=\"1748\" data-end=\"1776\"\u003e \u003cstrong data-start=\"1751\" data-end=\"1776\"\u003eDirect bolt-on installation\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"1778\" data-end=\"1806\"\u003e The exhaust system is designed: \u003c\/p\u003e\n\n\u003cul data-start=\"1808\" data-end=\"1991\"\u003e\n\n\u003cli data-start=\"1808\" data-end=\"1872\"\u003e\n\n\u003cp data-start=\"1810\" data-end=\"1872\"\u003e to fit directly into the original mounting points of the Audi R8 \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1873\" data-end=\"1929\"\u003e\n\n\u003cp data-start=\"1875\" data-end=\"1929\"\u003e for installation without welding or permanent changes\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"1930\" data-end=\"1991\"\u003e\n\n \u003cp data-start=\"1932\" data-end=\"1991\"\u003eto preserve the car's original structures and systems\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"1993\" data-end=\"2062\"\u003e OEM-level fit ensures a clean and unobtrusive finish.\u003c\/p\u003e\n\n\u003ch2 data-start=\"2069\" data-end=\"2114\"\u003e \u003cstrong data-start=\"2072\" data-end=\"2114\"\u003e304L Aircraft Grade Stainless Steel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-start=\"2116\" data-end=\"2224\"\u003e The entire system is made of high-quality \u003cstrong data-start=\"2166\" data-end=\"2209\"\u003e304L grade stainless steel\u003c\/strong\u003e , which offers: \u003c\/p\u003e\n\n\u003cul data-start=\"2226\" data-end=\"2406\"\u003e\n\n\u003cli data-start=\"2226\" data-end=\"2274\"\u003e\n\n\u003cp data-start=\"2228\" data-end=\"2274\"\u003e excellent corrosion and heat resistance \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2275\" data-end=\"2318\"\u003e\n\n\u003cp data-start=\"2277\" data-end=\"2318\"\u003e long service life even in demanding driving \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2319\" data-end=\"2359\"\u003e\n\n\u003cp data-start=\"2321\" data-end=\"2359\"\u003e flow-optimized internal structure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-start=\"2360\" data-end=\"2406\"\u003e\n\n\u003cp data-start=\"2362\" data-end=\"2406\"\u003e carefully finished TIG welds\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2408\" data-end=\"2482\"\u003e The material and workmanship meet Milltek's premium quality standards.\u003c\/p\u003e\n\n\u003ch2 data-start=\"2489\" data-end=\"2504\"\u003e \u003cstrong data-start=\"2492\" data-end=\"2504\"\u003eFit\u003c\/strong\u003e \u003c\/h2\u003e\n\n\u003cul data-start=\"2570\" data-end=\"2602\"\u003e\n\n\u003cli data-start=\"2570\" data-end=\"2602\"\u003e\n\n\u003cp data-start=\"2572\" data-end=\"2602\"\u003e \u003cstrong data-start=\"2572\" data-end=\"2602\"\u003eAudi R8 V8 4.2 FSI Quattro\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-start=\"2604\" data-end=\"2674\"\u003e Engine: \u003cstrong data-start=\"2614\" data-end=\"2646\"\u003e4.2 V8 (naturally aspirated)\u003c\/strong\u003e\u003cbr data-start=\"2646\" data-end=\"2649\"\u003e Model years \u003cstrong data-start=\"2661\" data-end=\"2674\"\u003e2007–2012\u003c\/strong\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":51920960684379,"sku":"MIL-SSXAU181","price":2557.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/SSXAU181_1_4241cac3-5d70-4d1d-83d8-6bd8fbb26038.png?v=1766051960"},{"product_id":"milltek-cat-back-exhaust-audi-r8-v10-5-2-fsi-quattro-coupe-spyder-2009-2012","title":"Milltek Cat Back Exhaust - Audi R8 V10 5.2 FSI Quattro Coupe \u0026 Spyder 2009-2012","description":"\u003cp data-end=\"781\" data-start=\"401\"\u003e The Milltek Sport \u003cstrong data-end=\"441\" data-start=\"415\"\u003eCat Back exhaust system\u003c\/strong\u003e is designed for the Audi R8 V10 5.2 FSI Quattro models (Coupe and Spyder) with a naturally aspirated V10 engine. The system replaces the exhaust section after the catalytic converter and brings out the true, high-revving nature of the R8 engine in a clear and sporty way – while maintaining the car’s drivability and refined overall look.\u003c\/p\u003e\n\n\u003cp data-end=\"943\" data-start=\"783\"\u003e The Cat Back solution improves exhaust flow and allows the V10 engine to breathe more freely, making the driving experience even more enjoyable.\u003c\/p\u003e\n\n\u003ch2 data-end=\"1014\" data-start=\"950\"\u003e \u003cstrong data-end=\"1014\" data-start=\"953\"\u003eThe clean and controlled sound of the free-breathing V10\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-end=\"1131\" data-start=\"1016\"\u003e Milltek has tuned this system to highlight the mechanical and rev-sensitive nature of the Audi R8 V10 engine: \u003c\/p\u003e\n\n\u003cul data-end=\"1290\" data-start=\"1133\"\u003e\n\n\u003cli data-end=\"1185\" data-start=\"1133\"\u003e\n\n\u003cp data-end=\"1185\" data-start=\"1135\"\u003e \u003cstrong data-end=\"1183\" data-start=\"1135\"\u003eDeeper and fuller sound at idle\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"1232\" data-start=\"1186\"\u003e\n\n \u003cp data-end=\"1232\" data-start=\"1188\"\u003e\u003cstrong data-end=\"1230\" data-start=\"1188\"\u003eSporty sound as the load increases\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"1290\" data-start=\"1233\"\u003e\n\n\u003cp data-end=\"1290\" data-start=\"1235\"\u003e \u003cstrong data-end=\"1290\" data-start=\"1235\"\u003eNo annoying resonance or drone when driving on the road\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-end=\"1402\" data-start=\"1292\"\u003e The sound profile is clearly sportier than standard, but retains the R8's premium refinement.\u003c\/p\u003e\n\n\u003ch2 data-end=\"1448\" data-start=\"1409\"\u003e \u003cstrong data-end=\"1448\" data-start=\"1412\"\u003eImproved flow and ride feel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-end=\"1481\" data-start=\"1450\"\u003e Milltek Cat Back Exhaust System: \u003c\/p\u003e\n\n\u003cul data-end=\"1691\" data-start=\"1483\"\u003e\n\n\u003cli data-end=\"1520\" data-start=\"1483\"\u003e\n\n\u003cp data-end=\"1520\" data-start=\"1485\"\u003e reduces exhaust back pressure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"1572\" data-start=\"1521\"\u003e\n\n\u003cp data-end=\"1572\" data-start=\"1523\"\u003e supports the engine's sensitive throttle response \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"1627\" data-start=\"1573\"\u003e\n\n\u003cp data-end=\"1627\" data-start=\"1575\"\u003e enhances exhaust gas flow throughout the entire rev range \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"1691\" data-start=\"1628\"\u003e\n\n\u003cp data-end=\"1691\" data-start=\"1630\"\u003e emphasizes the V10 engine's rev sensitivity and sound purity\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-end=\"1790\" data-start=\"1693\"\u003e The freer-flowing design is ideally suited to the characteristics of the naturally aspirated V10 engine.\u003c\/p\u003e\n\n\u003ch2 data-end=\"1825\" data-start=\"1797\"\u003e \u003cstrong data-end=\"1825\" data-start=\"1800\"\u003eDirect bolt-on installation\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-end=\"1855\" data-start=\"1827\"\u003e The exhaust system is designed: \u003c\/p\u003e\n\n\u003cul data-end=\"2040\" data-start=\"1857\"\u003e\n\n\u003cli data-end=\"1921\" data-start=\"1857\"\u003e\n\n\u003cp data-end=\"1921\" data-start=\"1859\"\u003e to fit directly into the original mounting points of the Audi R8 \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"1978\" data-start=\"1922\"\u003e\n\n\u003cp data-end=\"1978\" data-start=\"1924\"\u003e for installation without welding or permanent changes \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"2040\" data-start=\"1979\"\u003e\n\n\u003cp data-end=\"2040\" data-start=\"1981\"\u003e to preserve the car's original structures and systems\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n \u003cp data-end=\"2111\" data-start=\"2042\"\u003eOEM-level fit ensures a clean and unobtrusive finish.\u003c\/p\u003e\n\n\u003ch2 data-end=\"2163\" data-start=\"2118\"\u003e \u003cstrong data-end=\"2163\" data-start=\"2121\"\u003e304L Aircraft Grade Stainless Steel\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp data-end=\"2273\" data-start=\"2165\"\u003e The entire system is made of high-quality \u003cstrong data-end=\"2258\" data-start=\"2215\"\u003e304L grade stainless steel\u003c\/strong\u003e , which offers: \u003c\/p\u003e\n\n\u003cul data-end=\"2455\" data-start=\"2275\"\u003e\n\n\u003cli data-end=\"2323\" data-start=\"2275\"\u003e\n\n\u003cp data-end=\"2323\" data-start=\"2277\"\u003e excellent corrosion and heat resistance \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"2367\" data-start=\"2324\"\u003e\n\n\u003cp data-end=\"2367\" data-start=\"2326\"\u003e long service life even in demanding driving \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"2408\" data-start=\"2368\"\u003e\n\n\u003cp data-end=\"2408\" data-start=\"2370\"\u003e flow-optimized internal structure \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"2455\" data-start=\"2409\"\u003e\n\n\u003cp data-end=\"2455\" data-start=\"2411\"\u003e carefully finished TIG welds\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-end=\"2531\" data-start=\"2457\"\u003e The material and workmanship meet Milltek's premium quality standards.\u003c\/p\u003e\n\n\u003ch2 data-end=\"2553\" data-start=\"2538\"\u003e \u003cstrong data-end=\"2553\" data-start=\"2541\"\u003eFit\u003c\/strong\u003e \u003c\/h2\u003e\n\n\u003cul data-end=\"2687\" data-start=\"2605\"\u003e\n\n\u003cli data-end=\"2646\" data-start=\"2605\"\u003e\n\n\u003cp data-end=\"2646\" data-start=\"2607\"\u003e \u003cstrong data-end=\"2644\" data-start=\"2607\"\u003eAudi R8 V10 5.2 FSI Quattro Coupe\u003c\/strong\u003e \u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli data-end=\"2687\" data-start=\"2647\"\u003e\n\n\u003cp data-end=\"2687\" data-start=\"2649\"\u003e \u003cstrong data-end=\"2687\" data-start=\"2649\"\u003eAudi R8 V10 5.2 FSI Quattro Spyder\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-end=\"2797\" data-start=\"2689\"\u003e Engine: \u003cstrong data-end=\"2732\" data-start=\"2699\"\u003e5.2 V10 (naturally aspirated)\u003c\/strong\u003e\u003cbr data-end=\"2735\" data-start=\"2732\"\u003e Model years \u003cstrong data-end=\"2760\" data-start=\"2747\"\u003e2009–2012\u003c\/strong\u003e \u003cbr data-end=\"2763\" data-start=\"2760\"\u003e\u003cstrong data-end=\"2797\" data-start=\"2763\"\u003eNot suitable for V10 Plus models\u003c\/strong\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Race","offer_id":51921009410395,"sku":"MIL-SSXAU269","price":2703.0,"currency_code":"EUR","in_stock":true},{"title":"Super Cup","offer_id":51921009443163,"sku":"MIL-SSXAU328","price":3515.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/Race.png?v=1766052147"},{"product_id":"akrapovic-exhaust-system-slip-on-line-titanium-audi-r8-5-2-fsi-coupe-spyder-2016-2018","title":"AKRAPOVIC Exhaust System Slip-On Line (Titanium) AUDI R8 5.2 FSI Coupe \/ Spyder 2016-2018","description":"\u003ch2\u003eAKRAPOVIC S-AUR8SO3-T Exhaust System Slip-On Line (Titanium) for AUDI R8 5.2 FSI Coupe \/ Spyder 2016-2018\u003c\/h2\u003e\n\u003cp\u003eThe Slip-On Line exhaust system is constructed from ultra-lightweight high-grade titanium alloy, significantly improving the Audi R8’s power-to-weight ratio and handling characteristics. Precision engineering ensures enhanced throttle response and measurable increases in both power and torque.\u003c\/p\u003e\n\u003cp\u003eBack pressure is reduced to nearly half of the stock levels through optimized muffler geometry, integrated secondary resonators, and titanium dual-mode exhaust valves. The system is completed with two hand-crafted carbon fibre and titanium tailpipes, designed to integrate seamlessly into the factory diffuser.\u003c\/p\u003e\n\u003cp\u003eAcoustic tuning enhances the natural character of the V10 engine, delivering a refined growl at low rpm and transitioning into the distinctive Akrapovic race-inspired tone as engine speed increases. Additional sound adjustment is available with the optional Akrapovic Sound Kit.\u003c\/p\u003e\n\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-lightweight high-grade titanium construction\u003c\/li\u003e\n\u003cli\u003eImproved power-to-weight ratio and handling\u003c\/li\u003e\n\u003cli\u003eReduced back pressure with optimized muffler design\u003c\/li\u003e\n\u003cli\u003eTitanium dual-mode exhaust valves\u003c\/li\u003e\n\u003cli\u003eTwo carbon fibre and titanium tailpipes\u003c\/li\u003e\n\u003cli\u003eOptional Akrapovic Sound Kit compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Power: 398.9 kW at 8150 rpm (+8.5 kW)\u003c\/li\u003e\n\u003cli\u003eMaximum Torque: 391.9 Nm at 6500 rpm (+20.0 Nm)\u003c\/li\u003e\n\u003cli\u003eWeight: 14.7 kg\u003c\/li\u003e\n\u003cli\u003eWeight Reduction: -19.5 kg (-57.0%)\u003c\/li\u003e\n\u003cli\u003eNoise Level: 105.6 dB at 3750 rpm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53328441475419,"sku":"S-AUR8SO3-T","price":10314.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-s-aur8so3-t-exhaust-system-1_3000x_0ba25868-8fea-4ca7-9108-7711c8063cce.png?v=1780759876"},{"product_id":"akrapovic-mtp-me-t-2h-1-exhaust-system-evolution-line-titanium-for-mercedes-c63-amg-c63s-amg-w205-s205-2015-2018-ece-type-approval-1","title":"AKRAPOVIC Exhaust System Evolution Line (Titanium) MERCEDES C63 AMG \/ C63S AMG (W205 \/ S205) 2015-2018 ECE Type Approval","description":"\u003cp\u003eThe Evolution Line (Titanium) for the MERCEDES-BENZ AMG G63 \/ G 500 \/ G 550 has been created with durability in mind as well as performance using high-grade durable lightweight titanium, making the system 45% lighter than the stock system. It is finished with specially-designed tailpipes – fashioned in the Akrapovic foundry – exiting on either side of the vehicle, complementing the car's robust look, perfectly routed to fit within limited space. This system – with a pair of exhaust valves behind the rear mufflers to provide optimal control of the exhaust tones – delivers a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. Power and torque levels are increased through the entire rpm range. Also fits on the G 500 \/ G 550.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePower +8.1 kW at 4500 rpm\u003c\/li\u003e\n\n\u003cli\u003eTorque +19.0 Nm at 4000 rpm\u003c\/li\u003e\n\n\u003cli\u003eWeight -9.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAkrapovic Sound Kit is already included in the system.\u003c\/p\u003e\u003cp\u003eFitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\u003cp\u003eMandatory product:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAKRAPOVIC TP-T\/S\/24\/1 - Tail pipe set (Titanium)\u003c\/li\u003e\n\n\u003cli\u003eAKRAPOVIC P-HF1225 - Fitting kit (for mounting on G500 \/ G550)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFitment notice: For mounting Akrapovic exhaust S-ME\/TI\/5\/1 on Mercedes G500\/G550 the car has to be equipped with Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).\u003c\/p\u003e\u003cp\u003eAdditional original Mercedes parts have to be bought:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eA 901 492 00 44 -\u0026gt; 4 pieces\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 05 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 06 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53328466608475,"sku":"MTP-ME\/T\/2H\/1","price":6472.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-mtp-met2h1-exhaust-system_3000x_241bb1f6-cda2-4403-a24a-96c53c044d48.webp?v=1780761463"},{"product_id":"akrapovic-e-me-t-2-evolution-link-pipe-set-titanium-for-mercedes-s63-amg-coupe-c217-ece-type-approval","title":"AKRAPOVIC Evolution Link Pipe Set (Titanium) MERCEDES S63 AMG Coupe (C217) ECE Type Approval","description":"\u003cp\u003eThe Evolution Line (Titanium) for the MERCEDES-BENZ AMG G63 \/ G 500 \/ G 550 has been created with durability in mind as well as performance using high-grade durable lightweight titanium, making the system 45% lighter than the stock system. It is finished with specially-designed tailpipes – fashioned in the Akrapovic foundry – exiting on either side of the vehicle, complementing the car's robust look, perfectly routed to fit within limited space. This system – with a pair of exhaust valves behind the rear mufflers to provide optimal control of the exhaust tones – delivers a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. Power and torque levels are increased through the entire rpm range. Also fits on the G 500 \/ G 550.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePower +8.1 kW at 4500 rpm\u003c\/li\u003e\n\n\u003cli\u003eTorque +19.0 Nm at 4000 rpm\u003c\/li\u003e\n\n\u003cli\u003eWeight -9.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAkrapovic Sound Kit is already included in the system.\u003c\/p\u003e\u003cp\u003eFitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\u003cp\u003eMandatory product:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAKRAPOVIC TP-T\/S\/24\/1 - Tail pipe set (Titanium)\u003c\/li\u003e\n\n\u003cli\u003eAKRAPOVIC P-HF1225 - Fitting kit (for mounting on G500 \/ G550)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFitment notice: For mounting Akrapovic exhaust S-ME\/TI\/5\/1 on Mercedes G500\/G550 the car has to be equipped with Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).\u003c\/p\u003e\u003cp\u003eAdditional original Mercedes parts have to be bought:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eA 901 492 00 44 -\u0026gt; 4 pieces\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 05 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 06 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53328498065755,"sku":"E-ME\/T\/2","price":6232.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-e-me-t-2_3000x_9284102b-4f6f-4193-be83-7874ef389031.webp?v=1780762475"},{"product_id":"akrapovic-evolution-line-titanium-audi-rs-q8-4m","title":"AKRAPOVIC Evolution Line (Titanium) AUDI RS Q8 (4M)","description":"\u003ch2\u003eAKRAPOVIC Evolution Line (Titanium) AUDI RS Q8 (4M)\u003c\/h2\u003e\n\u003cp\u003eTThis beautifully formed exhaust has sound and performance running right through it. Constructed entirely from low-weight, high-grade \u003cstrong\u003etitanium\u003c\/strong\u003e, it features a central muffler flanked by \u003cstrong\u003etwo valves\u003c\/strong\u003e (the housings of both valves are cast at the in-house Akrapovič foundry) and a link pipe set with an X-connection element. With unique sound patterns designed to offer maximum enjoyment, the X-connection in the link pipe section gives the exhaust system a characteristic Akrapovič \u003cstrong\u003ehigh-frequency racing tone\u003c\/strong\u003e in the upper rev range, which is complemented by the deep and iconic Akrapovič rumble from low down in the rev range, providing a distinctive V8 growl. There also is a comfort mode, with no unwanted noise or drone in the cabin. Finished with eye-catching \u003cstrong\u003ecarbon-fibre \/ titanium tailpipes\u003c\/strong\u003e exiting on either side of the rear of the car, the exhaust also increases power by 6.9 kW at 5,600 rpm and adds 17.2 Nm of torque at 2,500 rpm when tested on Akrapovič’s in-house dyno in back-to-back runs with RS Q8 against the stock RS Sport exhaust system. It is a plug-and-play product, and due to its \u003cstrong\u003eECE type approval\u003c\/strong\u003e there is no need to tune the ECU. An optional Akrapovič Sound Kit and Downpipe \/ Link pipe set (SS) is available to upgrade the Evolution Line (Titanium) exhaust.\u003c\/p\u003e\n\u003cp\u003eWith the installation of the Downpipe \/ Link pipe set (SS), ECE type approval for the Evolution Line (Titanium) exhaust system is not valid, and remapping the ECU is mandatory when it is fitted.\u003c\/p\u003e\n\u003cp\u003eWith the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.\u003c\/p\u003e\n\u003cp\u003eECE type approval is only valid for cars equipped with gasoline particulate filter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003epower\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e+4.6 kWat 6200 rpm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003etorque\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e+5.9 Nmat 3500 rpm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eweight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-12.2 kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53328534176091,"sku":"S-AU\/TI\/20H","price":9365.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/4ee9bcce-26f3-4397-bb87-ea67dfa3583c.png?v=1780763469"},{"product_id":"akrapovic-evolution-line-titanium-mercedes-benz-amg-roadster-2017","title":"AKRAPOVIC Evolution Line (Titanium) MERCEDES-Benz AMG Roadster 2017+","description":"\u003ch2\u003eAKRAPOVIC Evolution Line (Titanium) MERCEDES-Benz AMG Roadster 2017+\u003c\/h2\u003e\n\u003cp\u003eThe Evolution Line (Titanium) takes these cars to heightened levels of auditory excitement, enhanced \u003cstrong\u003eperformance\u003c\/strong\u003e, and stunning good looks, all with a perfectly sculpted exhaust made from\u003cstrong\u003e ultra-lightweight titanium\u003c\/strong\u003e alloys that reduce the weight from the stock exhaust by \u003cstrong\u003eover 46%\u003c\/strong\u003e. Finished with hand-crafted \u003cstrong\u003ecarbon-fibre\u003c\/strong\u003e tailpipes, this exhaust has a stunning \u003cstrong\u003esoundtrack\u003c\/strong\u003e and that unique Akrapovič signature. The sound is controlled by a complex X-connection, cast in the in-house titanium foundry, with a precisely machined valve flap to alter the tones, which can be controlled with a console button inside the cabin or by the Sound Remote Controller of the optional \u003cstrong\u003eAkrapovič Sound Kit\u003c\/strong\u003e. When the X-connection valve is open, the exhaust system delivers a more continuous, smooth, and harmonic sound for a more comfortable ride, and in closed mode the acoustics have been maximised to give the cars a pure sporty and intense muscle-car V8 roar. Power and torque levels are increased throughout the entire rev range. It is ECE approved, so no re-map or other parts are needed and it is a simple \u003cstrong\u003eplug-and-play\u003c\/strong\u003e installation.\u003c\/p\u003e\n\u003cp\u003eFitting information for GT\/GT Roadster models: the Evolution system only fits cars equipped with the AMG Performance exhaust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFittment notice:This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003epower\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e+9.7 kWat 2550 rpm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003etorque\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e+36.2 Nmat 2300 rpm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eweight\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-12.2 kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53328534208859,"sku":"S-ME\/TI\/1H\/1","price":11709.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/400499_Jek7_S-ME-TI-1H-1.png?v=1780763470"},{"product_id":"akrapovic-exhaust-system-slip-on-line-titanium-audi-r8-fsi-coupe-spyder","title":"AKRAPOVIC Exhaust System Slip-On Line (Titanium) AUDI R8 FSI Coupe \/ Spyder","description":"\u003cdiv id=\"shopify-section-template--17650774048948__product-content\" class=\"shopify-section shopify-section--product-content\"\u003e\n\u003csection class=\"container\"\u003e\n\u003cdiv id=\"product-7479399481524-content\" class=\"product-content anchor\"\u003e\n\u003cdiv class=\"product-content__tabs anchor\" id=\"product-7479399481524-tabs\"\u003e\n\u003cdiv class=\"product-tabs\"\u003e\n\u003cdiv class=\"product-tabs__content\"\u003e\n\u003cdiv id=\"block-template--17650774048948__product-content-description\" class=\"product-tabs__tab-item-wrapper\"\u003e\n\u003cdiv class=\"product-tabs__tab-item-content rte\"\u003e\n\u003ch2\u003eAKRAPOVIC S-AUR8SO3-T Exhaust System Slip-On Line (Titanium) for AUDI R8 5.2 FSI Coupe \/ Spyder 2016-2018\u003c\/h2\u003e\n\u003cp\u003eThe Slip-On Line exhaust system is constructed from ultra-lightweight high-grade titanium alloy, significantly improving the Audi R8’s power-to-weight ratio and handling characteristics. Precision engineering ensures enhanced throttle response and measurable increases in both power and torque.\u003c\/p\u003e\n\u003cp\u003eBack pressure is reduced to nearly half of the stock levels through optimized muffler geometry, integrated secondary resonators, and titanium dual-mode exhaust valves. The system is completed with two hand-crafted carbon fibre and titanium tailpipes, designed to integrate seamlessly into the factory diffuser.\u003c\/p\u003e\n\u003cp\u003eAcoustic tuning enhances the natural character of the V10 engine, delivering a refined growl at low rpm and transitioning into the distinctive Akrapovic race-inspired tone as engine speed increases. Additional sound adjustment is available with the optional Akrapovic Sound Kit.\u003c\/p\u003e\n\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-lightweight high-grade titanium construction\u003c\/li\u003e\n\u003cli\u003eImproved power-to-weight ratio and handling\u003c\/li\u003e\n\u003cli\u003eReduced back pressure with optimized muffler design\u003c\/li\u003e\n\u003cli\u003eTitanium dual-mode exhaust valves\u003c\/li\u003e\n\u003cli\u003eTwo carbon fibre and titanium tailpipes\u003c\/li\u003e\n\u003cli\u003eOptional Akrapovic Sound Kit compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Power: 398.9 kW at 8150 rpm (+8.5 kW)\u003c\/li\u003e\n\u003cli\u003eMaximum Torque: 391.9 Nm at 6500 rpm (+20.0 Nm)\u003c\/li\u003e\n\u003cli\u003eWeight: 14.7 kg\u003c\/li\u003e\n\u003cli\u003eWeight Reduction: -19.5 kg (-57.0%)\u003c\/li\u003e\n\u003cli\u003eNoise Level: 105.6 dB at 3750 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53328534339931,"sku":"S-AUR8SO3-T","price":10314.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-s-aur8so3-t-exhaust-system-1.jpg?v=1780763472"},{"product_id":"akrapovic-s-me-t-4h-mufflers-slip-on-line-titanium-for-mercedes-amg-c63-s-e-performance-w206-s206-c43-4matic-w206-s206-2023","title":"AKRAPOVIC Mufflers Slip-On Line (Titanium) MERCEDES-AMG C63 S E Performance (W206\/S206) \/ C43 4MATIC (W206\/S206) 2023-","description":"\u003cp\u003eThe Evolution Line (Titanium) for the MERCEDES-BENZ AMG G63 \/ G 500 \/ G 550 has been created with durability in mind as well as performance using high-grade durable lightweight titanium, making the system 45% lighter than the stock system. It is finished with specially-designed tailpipes – fashioned in the Akrapovic foundry – exiting on either side of the vehicle, complementing the car's robust look, perfectly routed to fit within limited space. This system – with a pair of exhaust valves behind the rear mufflers to provide optimal control of the exhaust tones – delivers a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. Power and torque levels are increased through the entire rpm range. Also fits on the G 500 \/ G 550.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePower +8.1 kW at 4500 rpm\u003c\/li\u003e\n\n\u003cli\u003eTorque +19.0 Nm at 4000 rpm\u003c\/li\u003e\n\n\u003cli\u003eWeight -9.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAkrapovic Sound Kit is already included in the system.\u003c\/p\u003e\u003cp\u003eFitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\u003cp\u003eMandatory product:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAKRAPOVIC TP-T\/S\/24\/1 - Tail pipe set (Titanium)\u003c\/li\u003e\n\n\u003cli\u003eAKRAPOVIC P-HF1225 - Fitting kit (for mounting on G500 \/ G550)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFitment notice: For mounting Akrapovic exhaust S-ME\/TI\/5\/1 on Mercedes G500\/G550 the car has to be equipped with Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).\u003c\/p\u003e\u003cp\u003eAdditional original Mercedes parts have to be bought:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eA 901 492 00 44 -\u0026gt; 4 pieces\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 05 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 06 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53334247506267,"sku":"S-ME\/T\/4H","price":6097.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-s-met4h-mufflers-slip-on-line_3000x_c05670ea-6ee3-450c-a321-1548678a76e9.webp?v=1780832067"},{"product_id":"akrapovic-mtp-me-t-5h-exhaust-system-evolution-line-titanium-for-mercedes-benz-e63-amg-e63s-amg-w213-s213-2017-2020-ece-type-approval","title":"AKRAPOVIC Exhaust System Evolution Line (Titanium) MERCEDES-BENZ E63 AMG \/ E63S AMG (W213 \/ S213) 2017-2020 ECE Type Approval","description":"\u003cp\u003eThe Evolution Line (Titanium) for the MERCEDES-BENZ AMG G63 \/ G 500 \/ G 550 has been created with durability in mind as well as performance using high-grade durable lightweight titanium, making the system 45% lighter than the stock system. It is finished with specially-designed tailpipes – fashioned in the Akrapovic foundry – exiting on either side of the vehicle, complementing the car's robust look, perfectly routed to fit within limited space. This system – with a pair of exhaust valves behind the rear mufflers to provide optimal control of the exhaust tones – delivers a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. Power and torque levels are increased through the entire rpm range. Also fits on the G 500 \/ G 550.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePower +8.1 kW at 4500 rpm\u003c\/li\u003e\n\n\u003cli\u003eTorque +19.0 Nm at 4000 rpm\u003c\/li\u003e\n\n\u003cli\u003eWeight -9.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAkrapovic Sound Kit is already included in the system.\u003c\/p\u003e\u003cp\u003eFitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\u003cp\u003eMandatory product:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAKRAPOVIC TP-T\/S\/24\/1 - Tail pipe set (Titanium)\u003c\/li\u003e\n\n\u003cli\u003eAKRAPOVIC P-HF1225 - Fitting kit (for mounting on G500 \/ G550)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFitment notice: For mounting Akrapovic exhaust S-ME\/TI\/5\/1 on Mercedes G500\/G550 the car has to be equipped with Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).\u003c\/p\u003e\u003cp\u003eAdditional original Mercedes parts have to be bought:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eA 901 492 00 44 -\u0026gt; 4 pieces\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 05 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 06 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53334252454235,"sku":"MTP-ME\/T\/5H","price":5305.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-mtp-met5h-exhaust-system_3000x_f9a5c5e2-2b0d-413c-9e7e-81eed8b01541.webp?v=1780832458"},{"product_id":"akrapovic-s-me-t-1h-evolution-line-titanium-for-mercedes-amg-a45-a45s-w177-2020","title":"AKRAPOVIC Evolution Line (Titanium) MERCEDES-AMG A45 \/ A45S (W177) 2020","description":"\u003cp\u003eThe Evolution Line (Titanium) for the MERCEDES-BENZ AMG G63 \/ G 500 \/ G 550 has been created with durability in mind as well as performance using high-grade durable lightweight titanium, making the system 45% lighter than the stock system. It is finished with specially-designed tailpipes – fashioned in the Akrapovic foundry – exiting on either side of the vehicle, complementing the car's robust look, perfectly routed to fit within limited space. This system – with a pair of exhaust valves behind the rear mufflers to provide optimal control of the exhaust tones – delivers a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. Power and torque levels are increased through the entire rpm range. Also fits on the G 500 \/ G 550.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePower +8.1 kW at 4500 rpm\u003c\/li\u003e\n\n\u003cli\u003eTorque +19.0 Nm at 4000 rpm\u003c\/li\u003e\n\n\u003cli\u003eWeight -9.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAkrapovic Sound Kit is already included in the system.\u003c\/p\u003e\u003cp\u003eFitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\u003cp\u003eMandatory product:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAKRAPOVIC TP-T\/S\/24\/1 - Tail pipe set (Titanium)\u003c\/li\u003e\n\n\u003cli\u003eAKRAPOVIC P-HF1225 - Fitting kit (for mounting on G500 \/ G550)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFitment notice: For mounting Akrapovic exhaust S-ME\/TI\/5\/1 on Mercedes G500\/G550 the car has to be equipped with Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).\u003c\/p\u003e\u003cp\u003eAdditional original Mercedes parts have to be bought:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eA 901 492 00 44 -\u0026gt; 4 pieces\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 05 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 06 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53334262022491,"sku":"S-ME\/T\/1H","price":4712.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/akrapovic-s-me-t-1h-01_23eb5872-1721-4665-887c-93f47c07413e.webp?v=1780833539"},{"product_id":"akrapovic-s-me-ti-11-slip-on-line-titanium-mercedes-amg-a35l-z117","title":"AKRAPOVIC Slip-On Line (Titanium) MERCEDES-AMG A35L (Z117)","description":"\u003cp\u003eThe Evolution Line (Titanium) for the MERCEDES-BENZ AMG G63 \/ G 500 \/ G 550 has been created with durability in mind as well as performance using high-grade durable lightweight titanium, making the system 45% lighter than the stock system. It is finished with specially-designed tailpipes – fashioned in the Akrapovic foundry – exiting on either side of the vehicle, complementing the car's robust look, perfectly routed to fit within limited space. This system – with a pair of exhaust valves behind the rear mufflers to provide optimal control of the exhaust tones – delivers a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. Power and torque levels are increased through the entire rpm range. Also fits on the G 500 \/ G 550.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003ePower +8.1 kW at 4500 rpm\u003c\/li\u003e\n\n\u003cli\u003eTorque +19.0 Nm at 4000 rpm\u003c\/li\u003e\n\n\u003cli\u003eWeight -9.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eAkrapovic Sound Kit is already included in the system.\u003c\/p\u003e\u003cp\u003eFitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF).\u003c\/p\u003e\u003cp\u003eThis product does not meet emission compliance requirements for street or highway use.\u003c\/p\u003e\u003cp\u003eMandatory product:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAKRAPOVIC TP-T\/S\/24\/1 - Tail pipe set (Titanium)\u003c\/li\u003e\n\n\u003cli\u003eAKRAPOVIC P-HF1225 - Fitting kit (for mounting on G500 \/ G550)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eFitment notice: For mounting Akrapovic exhaust S-ME\/TI\/5\/1 on Mercedes G500\/G550 the car has to be equipped with Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).\u003c\/p\u003e\u003cp\u003eAdditional original Mercedes parts have to be bought:\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eA 901 492 00 44 -\u0026gt; 4 pieces\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 05 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\u003cli\u003eA 463 490 06 02 -\u0026gt; 1 piece\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":53335240278363,"sku":"S-ME\/TI\/11","price":4675.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/470232_9gr8_S-ME-TI-11_2500x_cd555428-e9fa-4991-aa05-3b38e31b6bfd.webp?v=1780859239"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/20-Audi-R8.png?v=1740847071","url":"https:\/\/www.qtparts.fi\/en-gb\/collections\/audi-r8-putkistot.oembed","provider":"QT Parts","version":"1.0","type":"link"}