{"title":"dÄHLer","description":"","products":[{"product_id":"dahler-valve-controller-g80-m3","title":"dÄHLer Valve Controller - BMW G80 M3","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M3 G80 was developed in Switzerland and manufactured in Germany and is a must have if you really like to control the sound of your M3.\u003c\/p\u003e\n\n\u003cp\u003e With the device installed you can manually open and close the standard built-in exhaust flap of your BMW M3 G80 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n \u003cp\u003eInstallation of the dAHLer Exhaust Flap Control Module in your BMW M3 G80 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n\u003cp\u003e With our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(option 1 is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard) \u003cbr\u003eYou can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n\u003cp\u003e You can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n \u003cp\u003eAs our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M3 G80 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M3 G80 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M3 G80 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n\u003cp\u003e The system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M3 G80 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n \u003cp\u003eThe Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":46886327157083,"sku":"dähler-valve-g80m3","price":638.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Black-Ed.png?v=1688115498"},{"product_id":"h-pipe-bmw-m3-g80-g81-m4-g82-g83","title":"dÄHLer H-Pipe - BMW M3 G80, G81, M4 G82, G83","description":"\u003cp data-start=\"84\" data-end=\"357\"\u003eThe dÄHLer H-Pipe is specifically designed for BMW G8X generation M3 and M4 models that use the original exhaust system. This upgrade enhances the sound of the S58 engine, bringing a smoother, richer, and sportier tone without excessive noise.\u003c\/p\u003e\n\u003cp data-start=\"359\" data-end=\"664\"\u003eThe exhaust system is made of high-quality stainless steel, and its compact design allows for easy installation and safe worldwide delivery.\u003c\/p\u003e\n\u003cp data-start=\"666\" data-end=\"927\"\u003eThe result is a cleaner, more technical, and sportier sound that emphasizes the character of the S58 engine without compromising driving comfort.\u003c\/p\u003e\n\u003cp data-start=\"1123\" data-end=\"1233\"\u003e\u003cstrong data-start=\"1123\" data-end=\"1142\"\u003eCompatibility:\u003c\/strong\u003e\u003cbr data-start=\"1142\" data-end=\"1145\"\u003eBMW M3 G80 \/ G81\u003cbr data-start=\"1161\" data-end=\"1164\"\u003eBMW M4 G82 \/ G83\u003cbr data-start=\"1180\" data-end=\"1183\"\u003e(Models equipped with the original exhaust system)\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":46941605036379,"sku":"18G800500-RL","price":906.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-H-Pipe-G80-G81-M3-G82-G83.png?v=1689581198"},{"product_id":"dahler-catback-putkisto-bmw-g80-m3-competition","title":"dÄHLer Cat-Back Exhaust System - BMW G80 M3 COMPETITION","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Piping made of high-quality steel with two flap controls.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model\u003cbr data-mce-fragment=\"1\"\u003e -Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance","offer_id":47315701825883,"sku":"18G800510","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust","offer_id":47315701858651,"sku":"18G800503-RL","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-M3-exhaust-system_1.png?v=1707048841"},{"product_id":"catless-downpipe-s58-bmw-m3-g80-g81-m4-g82-g83","title":"dÄHLer Catless Downpipe S58 - BMW M3, M4 G8X","description":"\u003cp data-mce-fragment=\"1\"\u003eCatless downpipes for S58 engine – BMW M2 G87 M3 G80 G81 M4 G82 G83 \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade of high-quality stainless steel with a ceramic coating.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg decoding=\"async\" alt=\"Catless downpipe BMW M2 G87 M3 G80 S58 engine G81 M4 G81 G83 no opf\" width=\"200\" height=\"150\" data-srcset=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-200x150.jpg 200w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-768x576.jpg 768w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-705x529.jpg 705w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-450x338.jpg 450w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-600x450.jpg 600w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2.jpg 800w\" data-src=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-200x150.jpg\" data-sizes=\"(max-width: 200px) 100vw, 200px\" class=\"alignnone size-medium wp-image-12779 ls-is-cached lazyloaded\" src=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-200x150.jpg\" sizes=\"(max-width: 200px) 100vw, 200px\" srcset=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-200x150.jpg 200w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-768x576.jpg 768w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-705x529.jpg 705w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-450x338.jpg 450w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2-600x450.jpg 600w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/03\/dAHLer-Catless-Downpipe-S58-without-OPF_2.jpg 800w\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":46941698392411,"sku":"18G800500","price":1646.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Catless-Downpipe-S58-with.png?v=1689584891"},{"product_id":"dahler-csl-style-grill-bmw-g8x-m3-m4","title":"dÄHLer CSL Style Grill - BMW G8X M3, M4","description":"\u003cp data-start=\"46\" data-end=\"226\"\u003eSuitable for model years \u003cstrong data-start=\"67\" data-end=\"117\"\u003e2020–2025 BMW M3 (G80 \/ G81) and M4 (G82 \/ G83)\u003c\/strong\u003e. Made of high-quality gloss black ABS plastic.\u003c\/p\u003e\n\u003cp data-start=\"228\" data-end=\"493\"\u003eThis striking front grille is a refined and precisely designed unit that fits perfectly on the G8X generation BMW M3 and M4 models – sedan, Touring, coupé, or cabriolet. The high-quality ABS material makes the grille lightweight, durable, and finished to OEM standards.\u003c\/p\u003e\n\u003cp data-start=\"495\" data-end=\"782\"\u003eThe grille is one of the most visually impactful upgrades for your M car.\u003c\/p\u003e\n\u003cp data-start=\"784\" data-end=\"1042\"\u003eEach part is finished with a glossy black lacquer surface that matches BMW's other gloss black exterior parts. The grille is ready for direct installation without additional painting or bodywork.\u003c\/p\u003e\n\u003cp data-start=\"1044\" data-end=\"1223\"\u003e\u003cstrong data-start=\"1044\" data-end=\"1055\"\u003eNote:\u003c\/strong\u003e The grille is also compatible with cars equipped with \u003cstrong data-start=\"1109\" data-end=\"1142\"\u003eAdaptive Cruise Control (ACC)\u003c\/strong\u003e. The necessary part of the grille can be removed to ensure the system functions normally.\u003c\/p\u003e\n\u003cp data-start=\"1225\" data-end=\"1357\"\u003eThis front grille is an excellent first upgrade for the BMW G8X M model and gives the car a distinctly sportier and more dynamic appearance.\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Default Title","offer_id":47216449749339,"sku":"18G8X0100","price":802.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-ABS-Black-Gloss-CS-Style.png?v=1705924294"},{"product_id":"dahler-tehonlisays-moduuli-bmw-g80-m3","title":"dÄHLer Engine Performance Tuning - BMW G80\/G81 M3","description":"\u003cp data-mce-fragment=\"1\"\u003e TUV approved, legal external ECU. Product approved for road traffic.\u003c\/p\u003e\n\n\u003cp\u003e Developed in Switzerland and quality Made in Germany –\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOur tune works with cars before and after production 06\/2020!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOur Engine Performance Tuning Module for the new BMW M3 Competition and M3 CS Sedan G80 and G81 Touring integrates flawlessly to extract maximum power and torque without faults and errors – just flawless. The harness has OEM style plugs to connect in-line with each boost pressure sensor, camshaft position sensor and rail pressure sensor on the engine.\u003c\/p\u003e\n\n\u003cp\u003e G80\/G81 M3 480HP:\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eStandard power:\u003c\/strong\u003e\u003cbr\u003e 480 hp (353 kW)\u003cbr\u003e 550 Nm (406 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eEnhanced power:\u003c\/strong\u003e\u003cbr\u003e 600 hp (441 kW)\u003cbr\u003e 690 Nm (509 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e G80\/G81 M3 Competition 510HP:\u003c\/p\u003e\n\n \u003cp\u003e\u003cstrong\u003eStandard power:\u003c\/strong\u003e\u003cbr\u003e 510 hp (375 kW)\u003cbr\u003e 650 Nm (479 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eEnhanced power:\u003c\/strong\u003e\u003cbr\u003e 612 hp (450 kW)\u003cbr\u003e 750 Nm (545 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e G80\/G81 M3 Competition 530HP:\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eStandard power:\u003c\/strong\u003e\u003cbr\u003e 530 hp (390 kW)\u003cbr\u003e 650 Nm (479 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eEnhanced power:\u003c\/strong\u003e\u003cbr\u003e 612 hp (450 kW)\u003cbr\u003e 750 Nm (545 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e G80\/G81 M3 CS 550HP:\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eStandard power:\u003c\/strong\u003e\u003cbr\u003e 550 hp (404 kW)\u003cbr\u003e 650 Nm (479 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eEnhanced power:\u003c\/strong\u003e\u003cbr\u003e 612 hp (450 kW)\u003cbr\u003e 750 Nm (545 ft-lbs)\u003c\/p\u003e\n\n\u003cp\u003e Based on 98 Octane rating\u003c\/p\u003e\n\n\u003cp\u003e Controlling the dAHLer Engine Performance Upgrade via your Smartphone is just one of the awesome features of our tuning module. With our tuning module you have the option to choose your own and fully customizable driving program. Wirelessly connect the dAHLer engine tuning performance module to your Bluetooth 4.0 compatible iOS and Android device via the free dAHLer Mobile app.\u003c\/p\u003e\n\n \u003cp\u003eThis option allows you to change 3 different performance maps, and update the firmware worldwide as we release free newer versions with updates, more powerful maps. If desired the extra power can be easily switched on or off with your smartphone, even while driving.\u003c\/p\u003e\n\n\u003cp\u003e Our app includes a configurable warm-up timer, so the pilot can decide how long warming up is needed before using the engine tuning. A separate Mobile app purchase is not required!\u003c\/p\u003e\n\n \u003cp\u003eOur Engine Performance Tuning Module for the BMW M3 Competition and M3 CS Sedan G80 and G81 M3 Touring is completely reversible to OEM specs and installs in less than 2 hours just in a few simple steps. This will be a safely upgrade which makes this the easiest and most effective power upgrade you will ever make on your new BMW M3 Competition Sedan G80. For a substantial increase in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then this Engine Performance Tuning Module power upgrade for your new BMW M3 Competition is best!\u003c\/p\u003e\n\n\u003cp\u003e Inside our dAHLer Engine Performance Tuning Module is an advanced control unit that is designed to optimize and work with the factory BMW ECU. The BMW M3 Competition and M3 CS maps and algorithms within the control unit have been elevated for this BMW engine, sending improved fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors.\u003c\/p\u003e\n\n \u003cp\u003eAlso included in the scope of delivery is an adapter which, when installed, returns the vehicle to its original state without having to remove the cable harness of the dAHLer engine performance upgrade. This can be used, for example, at a workshop appointment.\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software of the BMW M3 Competition and M3 CS Sedan G80 or G81 M3 Touring our Engine Performance Tuning Module is not lost or overwritten. This is where competitor tuning modules fall short! This is just another key aspect of our module because BMW is constantly releasing small software updates. All of the factory Diagnostics and service access is retained.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Module is undetectable to plug-in diagnostic Readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the Module and revert the car to factory settings. With the valet plug installed the BMW engine computer will use the stock maps instead of getting modified data from the Engine Performance Tuning Module.\u003c\/p\u003e\n\n \u003cp\u003e\u003cspan\u003e- Power gains of up to 120 hp to the wheels on a stock vehicle\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Works with cars before and after production 06\/2020\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- No removal of the DME required\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Controlling the Performance Tuning via your Smartphone\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Quick Plug \u0026amp; Play Installation\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Runs as smoothly as stock, this is how your BMW should have come from the factory\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Compatible with all driving modes\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Fuel economy unchanged during normal driving\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Comes with TUV Part Approval (emission tests according to WLTC regulations)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- EPA compliant (legal in the State of California)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Worldwide 3-year product warranty\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Ethanol (E93 or less) compatible tuning maps\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Not VIN locked, can be removed without a trace and resold down the road\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Developed in Switzerland and Made in Germany\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Tested on the German Autobahn\u003c\/span\u003e \u003c\/p\u003e\n\n\u003ch2 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-vehicle-manufacturer-warranty-and-emissions-disclaimer\"\u003e Vehicle manufacturer warranty and emissions Disclaimer\u003c\/h2\u003e\n\n \u003cp\u003eAll original dAHLer Line tuning modules come with a worldwide warranty of 3 years.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCustomers inside EU, CH, NO:\u003c\/strong\u003e\u003cbr\u003e An external insurance for the engine, gearbox and drive train is available.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eCustomers outside the EU:\u003c\/strong\u003e\u003cbr\u003e dAHLer makes no guarantees to the legality of any parts used for \"on highway vehicles\" and accepts no responsibility for compliance with the vehicle's OEM warranty.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eGeneral note:\u003c\/strong\u003e\u003cbr\u003e dAHLer will not be responsible for poor installation practices. We highly recommend having the assembly carried out by a professional workshop. The product should not be installed by a private individual.\u003c\/p\u003e\n\n\u003cp\u003e Any modification of the product leads to the automatic cancellation of the warranty.\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"G80\/G81 M3 480HP","offer_id":47216471408987,"sku":"12G800480","price":2622.0,"currency_code":"EUR","in_stock":true},{"title":"G80\/G81 M3 Competition 510HP","offer_id":47216471474523,"sku":"12G800480-COMP","price":2622.0,"currency_code":"EUR","in_stock":true},{"title":"G80\/G81 M3 Competition 530HP","offer_id":49330647204187,"sku":"12G800530","price":2622.0,"currency_code":"EUR","in_stock":true},{"title":"G80\/G81 M3 CS 550HP","offer_id":49330647236955,"sku":"12G800550","price":2622.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Engine-Tuning-for-BMW_800.png?v=1697531686"},{"product_id":"dahler-madallusjouset-bmw-g8x-m3-m4","title":"dÄHLer Lowering Springs - BMW G8X M3, M4","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLowering Springs M3 M4 G80 G81 G82 G83 (all)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA dAHLer sport spring set for BMW M car G80 G81 G82 G83 is a performance spring set created for the serious enthusiast.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLowering Springs M3 M4 with the lowest possible drop but with the exceptional ride quality you expect from a high-class tuner like dAHLer.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe benefits of a lower stance are many. Let's begin with the performance advantages of a dAHLer sport spring set installed in your G8x M car.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA Lowering Springs M3 M4 equipped BMW M exhibit reduced body roll in Corners as well as reduce squat during Acceleration and diminish nosedive under braking.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsing progressive spring technology to lower the vehicle's center of gravity. This proprietary progressive design delivers, both a smooth softer initial spring rate for exceptional ride quality combined with a stiffer final rate for high performance handling of your BMW M car G80 G81 G82 G83.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAnother performance advantage that is often overlooked is the reduced drag coefficient. Lowering Springs M3 M4 deliver the ultimate balance between high performance, lowering and comfortable ride quality.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt also reduces the excessive fender gap and when combined with dÄHLer Forged Wheel Set – CDC2 – Smoke Black Edition\u003cbr data-mce-fragment=\"1\"\u003e21 x 9.5 with 275\/25 R21 92Y Michelin Pilot Sport 4 S\u003cbr data-mce-fragment=\"1\"\u003e21 x 10.5 with 295\/25 R21 96Y Michelin Pilot Sport 4 S\u003cbr data-mce-fragment=\"1\"\u003ethe result is a car that handles just as hot as it looks for driving to a whole new level.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg decoding=\"async\" alt=\"dÄHLer lowering springs, sport spring set BMW M3 G80 G81 M4 G82 G83 CS\" width=\"200\" height=\"133\" data-srcset=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-200x133.jpg 200w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-768x512.jpg 768w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-705x470.jpg 705w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-450x300.jpg 450w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-600x400.jpg 600w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1.jpg 800w\" data-src=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-200x133.jpg\" data-sizes=\"(max-width: 200px) 100vw, 200px\" class=\"alignnone size-medium wp-image-13288 lazyloaded\" src=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-200x133.jpg\" sizes=\"(max-width: 200px) 100vw, 200px\" srcset=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-200x133.jpg 200w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-768x512.jpg 768w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-705x470.jpg 705w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-450x300.jpg 450w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1-600x400.jpg 600w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2023\/06\/dAHLer-CDC2-FORGED-wheels-BMW-G80-G81-M3-G82-G83-M4-95-kb-1.jpg 800w\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll dAHLer products were thoroughly evaluated on the street, track and unrestricted German Autobahn. It's the drive that pushes Racers to the very edge of their abilities, it's the same drive that pushes us to create nothing but the very best.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach set of our lowering springs M3 M4 is manufactured in Germany at an ISO 9001:2015 certified facility, and tested by the German TUV according to the latest regulations to fulfill the highest safety standards.\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"G80 M3","offer_id":47216735715675,"sku":"312260940-1","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"G80 M3 Competition","offer_id":47216735912283,"sku":"312260940-2","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"The xDrive of the G80 M3 Competition","offer_id":47216735945051,"sku":"312260940-3","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"G81 M3 Competition xDrive","offer_id":47216735977819,"sku":"312280940","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"G82 M4","offer_id":47216736010587,"sku":"312210940","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"G82 M4 Competition","offer_id":47216736043355,"sku":"312210940-2","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"G82 M4 Competition xDrive","offer_id":47216736076123,"sku":"312210940-3","price":761.0,"currency_code":"EUR","in_stock":true},{"title":"G83 M4 Competition xDrive","offer_id":47216736108891,"sku":"312210940-4","price":761.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-lowering-springs-BMW-G80.png?v=1697536754"},{"product_id":"dahler-catback-putkisto-bmw-f90-m5","title":"dÄHLer Axle-Back Exhaust System - BMW F90 M5","description":"\u003cp\u003e\u003cstrong\u003eBMW M5 Competition Axle-Back Performance Exhaust\u003cbr\u003e -\u0026gt;\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eworks with all F90 models, M5, Competition, CS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e An addition to our exceptional performance upgrades for your BMW M5 F90 is the dAHLer performance axle-back exhaust system, taking it to the next level.\u003c\/p\u003e\n\n\u003cp\u003e You're looking for a high-quality made stainless steel performance exhaust system with exhaust valves for your BMW M5 Competition?\u003c\/p\u003e\n\n\u003cp\u003e A dÄHLer RedLine exhaust system for the BMW F90 M5 Competition comes with a high-performance muffler and 2 exhaust valves with a much more aggressive sound than the stock muffler but still be perfectly livable for daily driving.\u003c\/p\u003e\n\n\u003cp\u003e The dÄHLer RedLine exhaust system includes a high-flow, valve controlled, stainless-steel performance muffler comes with our Valve Controller X black edition with memory and startup mode (only package offer) for those who want to be fully in command of the exhaust sound and .\u003c\/p\u003e\n\n \u003cp\u003edÄHLer RedLine is the most aggressive sounding performance exhaust system that dÄHLer offers for the BMW F90 M5. What that basically means is this muffler specifically designed on the engineer BMW vehicle to have that aggressive sound, yet still provide no drone at highway speeds. \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg srcset=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-200x150.jpg 200w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-768x576.jpg 768w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-705x529.jpg 705w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-450x338.jpg 450w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-600x450.jpg 600w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600.jpg 800w\" sizes=\"(max-width: 200px) 100vw, 200px\" src=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-200x150.jpg\" class=\"alignnone size-medium wp-image-13242 ls-is-cached lazyloaded\" data-sizes=\"(max-width: 200px) 100vw, 200px\" data-src=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-200x150.jpg\" data-srcset=\"https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-200x150.jpg 200w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-768x576.jpg 768w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-705x529.jpg 705w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-450x338.jpg 450w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600-600x450.jpg 600w, https:\/\/www.daehler-tuning.com\/wp-content\/uploads\/2021\/09\/20230421_151805_800x600.jpg 800w\" height=\"150\" width=\"200\" alt=\"dÄHLer BMW F90 M5 axle-back exhaust system\" decoding=\"async\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e Our RedLine exhaust system for the BMW F90 M5 Competition is here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n\u003cp\u003e Under normal driving conditions, our valve-controlled performance muffler stays closed, as operation of exhaust valves is unchanged and the dAHLer RedLine exhaust system is quite unassuming. But, when the valve-controlled system opens up the exhaust valves and our dÄHLer RedLine exhaust system gives your BMW F90 M5 that menacing growl.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eOther\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e No check engine lights, no re-programming of your car or anything silly is required after installation of our exhaust systems. All dÄHLer exhaust systems are compatible with ALL F90 models and are EPA compliant (USA).\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n \u003cp\u003e\u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eAxle-Back Exhaust\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e without logo\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e with red dÄHLer shadow logo\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e -Works with ALL F90 models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp\u003e Packaging:\u003cbr\u003e Safely Secured is a pallet\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"BLACK (without logo)","offer_id":47315639402843,"sku":"18F900625-nologo","price":3800.0,"currency_code":"EUR","in_stock":true},{"title":"BLACK (with dÄHLer logo)","offer_id":47315639435611,"sku":"18F900625-logo","price":3800.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20230421_151717_800x600_a77917d6-7e7e-4c89-b638-a9134f686cd9.png?v=1699973565"},{"product_id":"dahler-cat-back-putkisto-bmw-g87-m2","title":"dÄHLer Cat-Back Exhaust System - BMW G87 M2","description":"\u003cp\u003e \u003cstrong\u003edÄHLer Catback System (with EU cars)\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eTUV approved \/ European Homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made stainless steel performance exhaust system with 2 exhaust valves \u003cbr\u003estarting from OPF with EU models.\u003c\/p\u003e\n\n\u003cp\u003e Includes H-Pipe to replace the stock front resonator\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Comes with 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.90 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e -EU Homologated system\u003cbr\u003e -Works with all G87 models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Bespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n \u003cp\u003eExhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G87 models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance","offer_id":47315648348507,"sku":"18G800510-1-1","price":5345.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315648381275,"sku":"18G810500-RL-1-matte","price":4613.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315940835675,"sku":"18G810500-RL-1-carbon","price":4613.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-G81-M3-G82-G83-M4-exh_572f54eb-160b-4a85-af38-514bff429d55.png?v=1699974155"},{"product_id":"dahler-cat-back-putkisto-bmw-g42-m240i","title":"dÄHLer Cat-Back Exhaust System - BMW G42 M240i","description":"\u003cp\u003e \u003cstrong\u003edÄHLer Exhaust System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with one\u003cbr\u003e additional exhaust valve\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003cbr\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eDouble valve-controlled:\u003c\/strong\u003e\u003cbr\u003e One additional original BMW actuator included in delivery\u003cbr\u003e Connecting cable for actuators included in delivery\u003cbr\u003e (operation of exhaust valves is unchanged)\u003c\/p\u003e\n\n\u003cp\u003e Delivers a more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eChoose Your Exhaust Tip Options:\u003c\/strong\u003e\u003cbr\u003e 2 matte carbon round exhaust tips left and right (4 in total)\u003cbr\u003e 90 mm \/ 3.54 inches each\u003c\/p\u003e\n\n\u003cp\u003e – Without logo\u003cbr\u003e – dÄHLer silver shadow logo\u003cbr\u003e – dÄHLer red shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Other:\u003cbr\u003e - EPA compliant\u003cbr\u003e -Works with ALL G42 M240i models\u003c\/p\u003e\n\n\u003cp\u003e Packaging: \u003cbr\u003eSafely Secured is a pallet\u003c\/p\u003e\n\n\u003cp\u003e Comes with EWG Homologation (in preparation)\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eBMW M240i G42 Exhaust (Cat-Back with EU models)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e We offer an exhaust system with one extra exhaust valve for the BMW M240i xDrive G42 with a sound that has to be experienced.\u003c\/p\u003e\n\n\u003cp\u003e Our BMW M240i G42 exhaust system comes with a high-performance muffler with four Outlets and one additional exhaust valve with a much more aggressive sound than the stock exhaust system but still be perfectly livable for daily driving.\u003c\/p\u003e\n\n\u003cp\u003e It includes a high-flow, double valve controlled, stainless-steel performance muffler and comes if desired with our Valve Controller X with memory and startup mode (only package deal -\u0026gt; select VC2) for those who want to be fully in command of the exhaust sound. One additional original BMW actuator and connecting cable is included in delivery (operation of exhaust valves is unchanged).\u003c\/p\u003e\n\n\u003cp\u003e You have exhaust tip options you can choose: \u003cbr\u003eTwo matte carbon double round exhaust tips left and right 90 mm \/ 3.54 inches each -\u0026gt; | Without logo | dÄHLer silver shadow logo | dÄHLer red shadow logo\u003c\/p\u003e\n\n\u003cp\u003e No check engine lights, no re-programming of your car or anything silly is required after installation. Our BMW M240i G42 exhaust system is compatible with left and right hand drive models as well as cars with and without OPF.\u003c\/p\u003e\n\n\u003cp\u003e Approved and tested by the German TUV this system comes with a European Homologation according to the latest emission standards and is EPA compliant (USA).\u003c\/p\u003e\n\n\u003cp\u003e Not only do we engineer our performance mufflers to sound good we engineer our BMW M240i G42 exhaust to fit your BMW properly for a much easier installation.\u003c\/p\u003e\n\n \u003cp\u003eDesigned to mount using the factory BMW M240i hangers, the dÄHLer performance exhaust system is a bolt-on replacement for the OEM version. To help reduce the time you spend installing the dÄHLer system on your BMW M240i xDrive, slip-fit ​​joints are included to make fitment as easy as possible. Our exhaust tips are designed to fit the stock BMW M diffuser.\u003c\/p\u003e\n\n\u003cp\u003e Our BMW M240i G42 exhaust system is here to improve your driving experience with an awesome sound and a noticeable bump in performance.\u003c\/p\u003e\n\n\u003cp\u003e Under normal driving conditions, our valve-controlled performance muffler stays closed (stock), and the sound is quite unassuming. But, when you open up the throttle, the valve-controlled system opens up the valves, and our system gives you a powerful menacing growl. As EU models come with OPF Catalysts it's cat-back with EU models.\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"MATTE WITHOUT LOGO","offer_id":47315884573019,"sku":"18G420374-nologo","price":3851.0,"currency_code":"EUR","in_stock":true},{"title":"MATTE SILVER dÄHLer Logo","offer_id":47315884605787,"sku":"18G420374-silverlogo","price":3851.0,"currency_code":"EUR","in_stock":true},{"title":"MATTE RED dÄHLer Logo","offer_id":47315884638555,"sku":"18G420374-redlogo","price":3851.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-BMW-M240i-xDrive-G42-12.png?v=1699974470"},{"product_id":"dahler-catback-putkisto-bmw-g80-m3","title":"dÄHLer Cat-Back Exhaust System - BMW G80 M3","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp data-mce-fragment=\"1\"\u003ePiping made of high-quality steel with two valve controls.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model\u003cbr data-mce-fragment=\"1\"\u003e -Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Note! Not for the Competition model. The piping suitable for the Competition model is different.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Bespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n \u003cp\u003eDouble valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G8X models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance - MATTE","offer_id":47315711099227,"sku":"18G800480-matte","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315711164763,"sku":"18G800473RL-matte","price":4633.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315791872347,"sku":"18G800473RL-carbon","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-M3-exhaust-system_1_9e69fc5b-8a92-420d-9d1d-f55b76165a59.png?v=1707048820"},{"product_id":"dahler-catback-putkisto-bmw-g81-m3-competition","title":"dÄHLer Cat-Back Exhaust System - BMW G81 M3 COMPETITION","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Piping made of high-quality steel with two valve controls.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model \u003cbr data-mce-fragment=\"1\"\u003e-Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Note! Not for the Competition model. The piping suitable for the Competition model is different.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Bespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G8X models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance - MATTE","offer_id":47315717849435,"sku":"18G800510-1- matte","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315717882203,"sku":"18G810500-RL-matte","price":4633.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315811828059,"sku":"18G810500-RL-carbon","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-M3-exhaust-system_1_d69fbdbf-a429-44f3-8daf-5e3d1fd7f10c.png?v=1707048850"},{"product_id":"dahler-catback-putkisto-bmw-g82-m4-competition","title":"dÄHLer Cat-Back Exhaust System - BMW G82 M4 COMPETITION","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Piping made of high-quality steel with two valve controls.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model\u003cbr data-mce-fragment=\"1\"\u003e -Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Note! Not for the Competition model. The piping suitable for the Competition model is different.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n \u003cp\u003eBespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G8X models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance - MATTE","offer_id":47315732431195,"sku":"18G820510-matte","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315732463963,"sku":"18G820503-RL-matte","price":4633.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315813564763,"sku":"18G820503-RL-carbon","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-G81-M3-G82-G83-M4-exh22_94e10b2f-d7e4-4465-96f4-5565568642c5.png?v=1699975461"},{"product_id":"dahler-catback-putkisto-bmw-g82-m4","title":"dÄHLer Cat-Back Exhaust System - BMW G82 M4","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Piping made of high-quality steel with two flap controls.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n \u003cp data-mce-fragment=\"1\"\u003eComes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model\u003cbr data-mce-fragment=\"1\"\u003e -Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Note! Not for the Competition model. The piping suitable for the Competition model is different.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Bespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right \u003cbr\u003e102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G8X models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance - MATTE","offer_id":47315814449499,"sku":"18G820480-matte","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315814515035,"sku":"18G820473-RL-matte","price":4633.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315814547803,"sku":"18G820473-RL-carbon","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-G81-M3-G82-G83-M4-exh22_664da3c6-972e-4cb7-95f8-c7120cf12baa.png?v=1699976072"},{"product_id":"dahler-catback-putkisto-bmw-g83-m4","title":"dÄHLer Cat-Back Exhaust System - BMW G83 M4","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Piping made of high-quality steel with two valve controls.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model\u003cbr data-mce-fragment=\"1\"\u003e -Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Note! Not for the Competition model. The piping suitable for the Competition model is different.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n \u003cp\u003eHigh-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Bespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G8X models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance - MATTE","offer_id":47315921731931,"sku":"18G830480-2","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315921764699,"sku":"18G830500-RL-matte","price":4633.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315921797467,"sku":"18G830500-RL-carbon","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-G81-M3-G82-G83-M4-exh22_5d79ed2b-e02a-455f-93a2-7e56225963c3.png?v=1699976945"},{"product_id":"dahler-catback-putkisto-bmw-g83-m4-competition","title":"dÄHLer Cat-Back Exhaust System - BMW G83 M4 COMPETITION","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003edÄHLer Cat-Back System\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTUV approved \/ European homologated\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Piping made of high-quality steel with two valve controls.\u003c\/p\u003e\n\n \u003cp data-mce-fragment=\"1\"\u003eComes with an H-pipe that replaces the standard resonator.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The standard flap control remains, the flap control is removed from the standard piping and installed in the dÄHLer piping.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Comes with matte black exhaust tips (101mm)\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e The necessary fasteners are supplied.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e - EU homologated\u003cbr data-mce-fragment=\"1\"\u003e -EPA approved\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for a rear-wheel drive model\u003cbr data-mce-fragment=\"1\"\u003e -Fits the xDrive model\u003cbr data-mce-fragment=\"1\"\u003e -Suitable for right-hand drive models\u003cbr data-mce-fragment=\"1\"\u003e -Compatible with the dÄHLer Valve Controller\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e Note! Not for the Non-Competition model. The piping suitable for the Non-Competition model is different.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer RedLine Exhaust System\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eSound+ \/ Power+ (7 hp)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e High-quality made brushed finish stainless steel exhaust system with 2 exhaust valves\u003c\/p\u003e\n\n\u003cp\u003e Delivers a much more aggressive sound than the stock muffler\u003c\/p\u003e\n\n\u003cp\u003e Bespoke H-Pipe to replace the stock front resonator (unlocks a smooth tone out of the S58)\u003c\/p\u003e\n\n\u003cp\u003e Muffler with high-polished surface and lasered dÄHLer shadow logo\u003c\/p\u003e\n\n\u003cp\u003e Double valve-controlled, stock exhaust valve actuators are reused and operation of exhaust valves is unchanged\u003c\/p\u003e\n\n \u003cp\u003eExhaust Tips Option 1:\u003cbr\u003e 2 black matte double round exhaust tips left and right\u003cbr\u003e 101 mm \/ 3.94 inches each\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Tips Option 2:\u003cbr\u003e 2 carbon double round exhaust tips left and right\u003cbr\u003e 102 mm \/ 3.95 inches each\u003c\/p\u003e\n\n\u003cp\u003e Necessary mounting hardware included\u003c\/p\u003e\n\n\u003cp\u003e - EPA compliant\u003cbr\u003e -Works with ALL G8X models\u003cbr\u003e -Works with dÄHLer Valve Controller\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"dÄHLer HP High-Performance - MATTE","offer_id":47315928121691,"sku":"18G830480-1","price":5663.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - MATTE","offer_id":47315928154459,"sku":"18G800473-RL-matte","price":4633.0,"currency_code":"EUR","in_stock":true},{"title":"dÄHLer RedLine Exhaust - CARBON","offer_id":47315928187227,"sku":"18G800473-RL-carbon","price":4633.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-G80-G81-M3-G82-G83-M4-exh22_c9dd1a7f-9ec0-4718-b801-fd62274971f8.png?v=1699977025"},{"product_id":"dahler-valve-controller-bmw-x5-m-competition-f95","title":"dÄHLer Valve Controller - BMW X5 M \u0026amp; Competition F95","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW X5 M was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW X5 M at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW X5 M is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW X5 M goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW X5 M is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW X5 M vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW X5 M is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47643995537755,"sku":"12XM5100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47643995570523,"sku":"12XM5200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Schubla_1.png?v=1707042335"},{"product_id":"dahler-valve-controller-bmw-x5-m50i-g05","title":"dÄHLer Valve Controller - BMW X5 M50i G05","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW X5 M50i was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW X5 M50i at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW X5 M50i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW X5 M50i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW X5 M50i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW X5 M50i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW X5 M50i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644016607579,"sku":"1250100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644016640347,"sku":"1250200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Schubla_1_75b1095e-c08c-4ed3-8147-4b01eaa08f7b.png?v=1707042451"},{"product_id":"dahler-valve-controller-bmw-x6-m-competition-f96","title":"dÄHLer Valve Controller - BMW X6 M Competition F96","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW X6 M was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW X6 M at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW X6 M is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW X6 M goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW X6 M is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW X6 M vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW X6 M is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644023128411,"sku":"12XM6100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644023161179,"sku":"12XM6200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb.png?v=1707042697"},{"product_id":"dahler-valve-controller-bmw-x6-m50i-g06","title":"dÄHLer Valve Controller - BMW X6 M50i G06","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW X6 M50i was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW X6 M50i at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW X6 M50i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW X6 M50i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW X6 M50i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW X6 M50i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW X6 M50i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644024865115,"sku":"1250X6100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644024897883,"sku":"1250X6200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_cde4a742-5703-4198-8eb6-509a123fa919.png?v=1707042785"},{"product_id":"dahler-valve-controller-bmw-x3-m-bmw-x3-m-competition-f97","title":"dÄHLer Valve Controller - BMW X3 M \u0026amp; Competition F97","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW X3 M was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW X3 M at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW X3 M is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW X3 M goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW X3 M is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW X3 M vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW X3 M is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644027650395,"sku":"12X3M100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644027683163,"sku":"12X3M200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_8844134a-f3e2-4b86-8fdf-d6964a78c738.png?v=1707042867"},{"product_id":"dahler-valve-controller-bmw-x3-m-x4-m-competition-f98","title":"dÄHLer Valve Controller - BMW X3 M, X4 M \u0026amp; Competition F98","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW X4 M was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW X4 M at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW X4 M is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW X4 M goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW X4 M is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW X4 M vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW X4 M is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644031025499,"sku":"12X4M100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644031058267,"sku":"12X4M200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_8c134114-a61c-4872-ad0c-753a997364d1.png?v=1707042976"},{"product_id":"dahler-valve-controller-bmw-840i-g14-g15-g16","title":"dÄHLer Valve Controller - BMW 840i G14, G15, G16","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW 840i G14, G15, G16 was developed and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 840i at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 840i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 840i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 840i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 840i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 840i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644031746395,"sku":"1240G14100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644031779163,"sku":"1240G14200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_60389b7d-8f03-4fd5-81df-4a31544d809d.png?v=1707043049"},{"product_id":"dahler-valve-controller-bmw-z4-30i-20i-g29","title":"dÄHLer Valve Controller - BMW Z4 30i, 20i G29","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW Z4 30i and 20i G29 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW Z4 30i and 20i G29 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW Z4 30i and 20i G29 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW Z4 30i and 20i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW Z4 30i and 20i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW Z4 30i and 20i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW Z4 30i and 20i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644034007387,"sku":"1230G29100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644034040155,"sku":"1230G29200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_ff027ae6-88b1-437c-94f5-24c293830b9b.png?v=1707043143"},{"product_id":"dahler-valve-controller-bmw-z4-m40i-g29","title":"dÄHLer Valve Controller - BMW Z4 M40i G29","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW Z4 M40i G29 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW Z4 M40i G29 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW Z4 M40i G29 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW Z4 M40i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW Z4 M40i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW Z4 M40i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW Z4 M40i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644042133851,"sku":"1240G29100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644042166619,"sku":"1240G29200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_27080936-2965-40b2-923a-48dd93b48732.png?v=1707043399"},{"product_id":"dahler-valve-controller-bmw-330i-330e-g20","title":"dÄHLer Valve Controller - BMW 330i, 330e G20","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module BMW 330i, 330e Sedan G20 series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 330i, 330e Sedan G20 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 330i, 330e is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cbr\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 330i, 330e goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 330i, 330e is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 330i, 330e vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 330i, 330e is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644045082971,"sku":"1230G20100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644045115739,"sku":"1230G20200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_2fa6df58-13b6-4ea3-a8ce-f4178b57314d.png?v=1707043458"},{"product_id":"dahler-valve-controller-bmw-530i-530e-g30-g31","title":"dÄHLer Valve Controller - BMW 530i, 530e G30\/G31","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 530i, 530e G30 \/ G31 series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 530i, 530e at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 530i, 530e is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 530i, 530e goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 530i, 530e is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 530i, 530e vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 530i, 530e is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644049539419,"sku":"1230G30100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644049572187,"sku":"1230G30200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_36006cf4-95fc-48ff-9e31-6c776dcdaf6f.png?v=1707043514"},{"product_id":"dahler-valve-controller-bmw-540i-g30-g31","title":"dÄHLer Valve Controller - BMW 540i G30\/G31","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 540i G series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 540i at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 540i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 540i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 540i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 540i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 540i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644050915675,"sku":"1240G30100-1","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644050948443,"sku":"1240G30200-1","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_c3b98ba9-918e-4dd5-8dfb-4fffc0ea4f95.png?v=1707043565"},{"product_id":"dahler-valve-controller-bmw-m550i-g30-g31","title":"dÄHLer Valve Controller - BMW M550i G30\/G31","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M550i G series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M550i at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M550i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M550i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M550i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M550i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M550i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644056486235,"sku":"1250G30100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644056519003,"sku":"1250G30200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_3840037f-4002-4595-8ec1-16dc02b089de.png?v=1707043624"},{"product_id":"dahler-valve-controller-bmw-m850i-g14-g15-g16","title":"dÄHLer Valve Controller - BMW M850i ​​G14, G15, G16","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M850i ​​G14, G15, G16 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M850i ​​at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M850i ​​is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M850i ​​goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M850i ​​is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M850i ​​vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M850i ​​is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644057272667,"sku":"1250100-2","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644057305435,"sku":"1250200-2","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_a3ce67b6-ebea-4e0b-abd5-ca0198cd9c4d.png?v=1707043672"},{"product_id":"dahler-valve-controller-bmw-m340i-xdrive-rwd","title":"dÄHLer Valve Controller - BMW M340i xDrive \u0026amp; RWD","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M340i Sedan (works with xDrive \u0026amp; RWD) was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M340i Sedan at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M340i Sedan is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cbr\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M340i Sedan goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M340i Sedan is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M340i Sedan vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M340i Sedan is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644061073755,"sku":"1240100-1","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644061106523,"sku":"1240100-2","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_709325a4-9777-4f11-a122-49572e99f365.png?v=1707043776"},{"product_id":"dahler-valve-controller-bmw-330i-g21","title":"dÄHLer Valve Controller - BMW 330i G21","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 330i Touring G21 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 330i Touring G21 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 330i Touring G21 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cbr\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 330i Touring goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 330i Touring is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 330i Touring vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 330i Touring is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644067299675,"sku":"1230G21100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644067332443,"sku":"1230G21200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_1ee3f9bf-fca1-4281-a0a7-748bd7837d26.png?v=1707043850"},{"product_id":"dahler-valve-controller-bmw-m340i-xdrive-g21","title":"dÄHLer Valve Controller - BMW M340i xDrive G21","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M340i Touring G21 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M340i Touring G21 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M340i Touring is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cbr\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M340i Touring goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M340i Touring is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M340i Touring vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M340i Touring is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644070248795,"sku":"1240G21100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644070281563,"sku":"1240G21200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_0dc74609-3259-4be6-8347-5a7dca9cd1a7.png?v=1707043896"},{"product_id":"dahler-valve-controller-bmw-430i-g22","title":"dÄHLer Valve Controller - BMW 430i G22","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 430i Coupe G22 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 430i Coupe G22 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 430i Coupe G22 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 430i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 430i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 430i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 430i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644070838619,"sku":"1230G22100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644070871387,"sku":"1230G22200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_a7dbcadd-687e-4852-b739-041fd1f9f69a.png?v=1707043950"},{"product_id":"dahler-valve-controller-bmw-730i-730li-g11-g12","title":"dÄHLer Valve Controller - BMW 730i, 730Li G11\/G12","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 740e and 740Le G11 \/ G12 Plug-In Hybrid was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 740e and 740Le G11 \/ G12 Plug-In Hybrid at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 740e Plug-In Hybrid is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 740e Plug-In Hybrid goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 740e Plug-In Hybrid is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 740e Plug-In Hybrid vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 740e Plug-In Hybrid is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644085977435,"sku":"1240G11E100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644086010203,"sku":"1240G11E200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_b8ecaf3a-61c8-4663-97cc-d2ef792a3ada.png?v=1707044363"},{"product_id":"dahler-valve-controller-bmw-740i-740li-g11-g12","title":"dÄHLer Valve Controller - BMW 740i, 740Li G11\/G12","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 740i and 740Li G11 \/ G12 series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 740i and 740Li G11 \/ G12 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 740i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 740i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 740i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 740i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 740i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644088795483,"sku":"1240G11100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644088828251,"sku":"1240G11200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_8f126534-8c95-469c-b609-e53c50b3f2bc.png?v=1707044513"},{"product_id":"dahler-valve-controller-bmw-750i-750li-g11-g12","title":"dÄHLer Valve Controller - BMW 750i, 750Li G11\/G12","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 750i and 750Li G11 \/ G12 series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 750i and 750Li G11 \/ G12 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 750i is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 750i goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 750i is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 750i vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 750i is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644089844059,"sku":"1250G11100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644089876827,"sku":"1250G11200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_ef5f07a5-86dc-4c88-aa6b-04ee3485e859.png?v=1707044555"},{"product_id":"dahler-valve-controller-bmw-m2-competition-f87","title":"dÄHLer Valve Controller - BMW M2 Competition F87","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW M2 Competition F87 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M2 Competition F87 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M2 Competition is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M2 Competition goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M2 Competition is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M2 Competition vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M2 Competition is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644091187547,"sku":"12M2CO100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644091220315,"sku":"12M2CO200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_38ab5aab-47b6-43a4-ad7b-66ca00dc95c4.png?v=1707044604"},{"product_id":"dahler-valve-controller-bmw-m2-cs-f87","title":"dÄHLer Valve Controller - BMW M2 CS F87","description":"\u003cp\u003eOur Exhaust Flap Control Module for the BMW M2 CS F87 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n\u003cp\u003e With the device installed you can manually open and close the standard built-in exhaust flap of your BMW M2 CS F87 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M2 CS is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n \u003cp\u003eThe complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n\u003cp\u003e With our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n \u003cp\u003e\u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n\u003cp\u003e You can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M2 CS goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M2 CS is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n \u003cp\u003eOur Exhaust Flap \/ Valve Control Module for your BMW M2 CS vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n\u003cp\u003e The system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M2 CS is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644092367195,"sku":"12M2CS100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644092399963,"sku":"12M2CS200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_2ca30eda-af05-4b35-affe-173934f94203.png?v=1707044646"},{"product_id":"dahler-valve-controller-bmw-m3-competition-f80","title":"ddÄHLer Valve Controller - BMW M3 Competition F80","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M3 Competition F80 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M3 Competition F80 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M3 Competition F80 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M3 Competition F80 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M3 Competition F80 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M3 Competition F80 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M3 Competition F80 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644095480155,"sku":"12FM3CO100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644095512923,"sku":"12FM3CO200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_ca2fe55f-434c-484f-95a4-54d867a0f2fb.png?v=1707044686"},{"product_id":"dahler-valve-controller-bmw-m3-cs-f80","title":"dÄHLer Valve Controller - BMW M3 CS F80","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M3 CS F80 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M3 CS F80 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M3 CS F80 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M3 CS F80 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M3 CS F80 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M3 CS F80 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M3 CS F80 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644097773915,"sku":"12FM3CS100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644097806683,"sku":"12FM3CS200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_8b28ca78-1535-42c1-81aa-c22f597fded1.png?v=1707044729"},{"product_id":"dahler-valve-controller-bmw-m3-f80","title":"dÄHLer Valve Controller - BMW M3 F80","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M3 F80 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M3 F80 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M3 F80 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M3 F80 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M3 F80 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M3 F80 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M3 F80 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644099379547,"sku":"12FM3100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644099412315,"sku":"12FM3200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_2564b64c-2236-4526-9960-d8e9fabd1d69.png?v=1707044775"},{"product_id":"dahler-valve-controller-bmw-m4-competition-g82","title":"dÄHLer Valve Controller - BMW M4 Competition G82","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW M4 Competition G82 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M4 Competition G82 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M4 Competition G82 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M4 G82 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M4 Competition G82 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M4 Competition G82 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M4 G82 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644101902683,"sku":"12GM100-2","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644101935451,"sku":"12GM200-1","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_ed3475ef-9f01-41c5-a024-04e7cadd4519.png?v=1707044883"},{"product_id":"dahler-valve-controller-bmw-m4-convertible-g83","title":"dÄHLer Valve Controller - BMW M4 Convertible G83","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M4 Convertible G83 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M4 Convertible G83 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of the dAHLer Exhaust Flap Control Module in your BMW M4 Convertible G83 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M4 Convertible G83 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M4 Convertible G83 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M4 Convertible G83 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M4 Convertible G83 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644104556891,"sku":"12GM100-2-1-1","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644104589659,"sku":"12GM200-1-1-1","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_d69b1d78-7369-4fb4-b818-bc0f9e6106e8.png?v=1707044945"},{"product_id":"dahler-valve-controller-bmw-m4-g82","title":"dÄHLer Valve Controller - BMW M4 G82","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M4 G82 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M4 G82 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M4 G82 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M4 G82 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M4 G82 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M4 G82 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M4 G82 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644106522971,"sku":"12GM100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644106555739,"sku":"12GM200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_8969f66c-c38a-49db-844c-855092da89f5.png?v=1707044991"},{"product_id":"dahler-valve-controller-bmw-m5-competition-f90","title":"dÄHLer Valve Controller - BMW M5 Competition F90","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW M5 Competition F90 was developed and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M5 Competition at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M5 Competition F90 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M5 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M5 Competition F90 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M5 Competition vehicle is here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M5 Competition is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644107440475,"sku":"12FM5100-1","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644107473243,"sku":"12FM5200-1","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_c68c33d0-4a60-4f11-b673-97b24bcd8e4f.png?v=1707045037"},{"product_id":"dahler-valve-controller-bmw-m5-cs-f90","title":"dÄHLer Valve Controller - BMW M5 CS F90","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW M5 CS F90 was developed and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M5 CS at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M5 CS F90 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M5 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M5 CS F90 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M5 Competition vehicle is here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M5 CS is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644107866459,"sku":"12FM5100-1-1","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644107899227,"sku":"12FM5200-1-1","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_ba8b6a3c-e5a5-4c98-ac98-c0f9981689f2.png?v=1707045080"},{"product_id":"dahler-valve-controller-bmw-m5-f90","title":"dÄHLer Valve Controller - BMW M5 F90","description":"\u003cp\u003e Our Exhaust Flap Control Module for the BMW M5 F90 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M5 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M5 F90 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M5 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M5 F90 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M5 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M5 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644108816731,"sku":"12FM5100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644108882267,"sku":"12FM5200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_1355eafb-0fcf-472e-9728-fe663c2c3b94.png?v=1707045125"},{"product_id":"dahler-valve-controller-bmw-m760li-g12","title":"dÄHLer Valve Controller - BMW M760Li G12","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW 760Li G12 series was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW 760Li G12 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW 760Li G12 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW 760Li goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW 760Li is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW 760Li vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW 760Li is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644110029147,"sku":"1260G12100","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644110061915,"sku":"1260G12200","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_7461a8d8-d91f-4b3a-bcac-16180ee1b43e.png?v=1707045171"},{"product_id":"dahler-valve-controller-bmw-m8","title":"dÄHLer Valve Controller - BMW M8","description":"\u003cp\u003e The dAHLer Exhaust Flap Control Module for the BMW M8 Competition Coupe F92 was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.\u003c\/p\u003e\n\n \u003cp\u003eWith the device installed you can manually open and close the standard built-in exhaust flap of your BMW M8 at any time. It operates at the push of a button on the included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.\u003c\/p\u003e\n\n\u003cp\u003e Installation of our Exhaust Flap \/ Valve Control Module in your BMW M8 Competition Coupe F92 is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.\u003c\/p\u003e\n\n\u003cp\u003e The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.\u003c\/p\u003e\n\n \u003cp\u003eWith our smart Exhaust Flap \/ Valve Control Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust flap closed it could damage the engine in a long term.\u003c\/p\u003e\n\n\u003cp\u003e You can choose between 2 options\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control S\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(this option is not available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Standard)\u003cbr\u003e You can switch the exhaust flap to OPEN permanently and back to STOCK function with the 2-button remote control.\u003c\/p\u003e\n\n\u003cp\u003e With the OPEN function the flap stays open until you either close it via remote or turn off the engine. With the STOCK function the BMW engine control unit takes over the opening and closing. The start setting is predefined to STOCK and cannot be changed.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFlap Control X\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this option is available in the US)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e (Extra Features)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e In addition, Stage 2 has the functions of Stage 1 and the following:\u003c\/p\u003e\n\n\u003cp\u003e Start mode adjustable via remote control or memory function\u003c\/p\u003e\n\n \u003cp\u003eYou can use the remote control to specify the function in which the vehicle should start. Or you can activate the memory function and the device always remembers the last driver's setting even after an engine stop (OPEN or STOCK).\u003c\/p\u003e\n\n\u003cp\u003e If BMW updates the computer software, our Exhaust Flap \/ Valve Control Module is not lost or overwritten.\u003c\/p\u003e\n\n\u003cp\u003e As our Exhaust Flap \/ Valve Control Module operates as minimally in the vehicle as necessary, it does not leave an error message. When your BMW M8 goes to the BMW workshop for maintenance, no errors appear on the DIS machine.\u003c\/p\u003e\n\n\u003cp\u003e The dAHLer Exhaust Flap \/ Valve Control Module for the BMW M8 is undetectable to plug-in diagnostic Readers and it leaves no traces behind\u003c\/p\u003e\n\n\u003cp\u003e Our Exhaust Flap \/ Valve Control Module for your BMW M8 vehicles are here to improve your driving experience with an awesome sound.\u003c\/p\u003e\n\n \u003cp\u003eThe system has been checked and it is not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.\u003c\/p\u003e\n\n\u003cp\u003e Exhaust Flap \/ Valve Control Module for the BMW M8 is built to be safe from the ground up, so that it cannot interfere with the data bus.\u003c\/p\u003e\n\n\u003cp\u003e The Module is permanently resistant from up to -30° to +80° C (-22° to 176° F). As a rule, you don't need any additional heat protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003edÄHLer Valve Controller operation + installation\u003c\/strong\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AY25HJNCLww?si=CPTpb0XnO3xE90YZ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"QT Parts","offers":[{"title":"Flap Control S","offer_id":47644110618971,"sku":"1250100-1","price":592.0,"currency_code":"EUR","in_stock":true},{"title":"Flap Control X","offer_id":47644110651739,"sku":"1250200-1","price":631.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dAHLer-Valve-Controller-Produktb_8dbaa9a5-aeff-4a61-b45a-24868af63166.png?v=1707045214"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/dahler_logo.png?v=1702474774","url":"https:\/\/www.qtparts.fi\/en-gb\/collections\/dahler.oembed?page=8","provider":"QT Parts","version":"1.0","type":"link"}