{"title":"FMIC.Pro - Putkistot","description":null,"products":[{"product_id":"fmic-pro-valved-exhaust-system-audi-a6-a7-c8-3-0t-v6-2019","title":"FMIC.Pro Valved Exhaust System - Audi A6, A7 C8 3.0T V6 2019-","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system for Audi A6 \/ A7 C8 3.0 TFSI V6 2019–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure uniform geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All welding seams are TIG-welded under argon gas protection, ensuring clean, finished, and completely airtight joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the path of the exhaust gases at the rear of the system. When the valves are closed, the exhaust gases pass through the entire muffler system, keeping the sound subdued and maintaining high driving comfort even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure the best possible flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 4 round outlets\u003cbr\u003ePipe diameter: 63 mm \/ 2.5”\u003cbr\u003eEngine: 3.0 TFSI V6 Turbo (EA839)\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 C8 3.0 TFSI V6 2019-\u003c\/li\u003e\n\u003cli\u003eAudi A7 C8 3.0 TFSI V6 2019-\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54605870301531,"sku":"FP-EXHAUST-041","price":1677.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-041-2.png?v=1793628153"},{"product_id":"fmic-pro-valved-exhaust-system-audi-a6-c7-2-0t-2012-2018","title":"FMIC.Pro Valved Exhaust System - Audi A6 C7 2.0T 2012-2018","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system for Audi A6 C7 2.0T 2012–2018\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure uniform geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All welded seams are TIG-welded under argon gas shielding, ensuring neat, finished, and completely airtight joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the path of the exhaust gases at the rear of the system. When the valves are closed, the exhaust gases pass through the entire muffler system, keeping the sound subdued and driving comfort high even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled by an included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure the best possible flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 4 round outlets\u003cbr\u003ePipe diameter: 76 mm \/ 3.0”\u003cbr\u003eEngine: 2.0 TFSI R4 Turbo\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 C7 2.0T 2012–2018\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54605942391131,"sku":"FP-EXHAUST-042","price":1440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-042.png?v=1793628420"},{"product_id":"fmic-pro-valved-exhaust-system-audi-a6-a7-c8-2-0t-2018-2020","title":"FMIC.Pro Valved Exhaust System - Audi A6 A7 C8 2.0T 2018-2020","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system for Audi A6 \/ A7 C8 2.0T 2018–2020\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision bent pipes ensure consistent geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely sealed joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the path of the exhaust gases at the rear of the system. When the valves are closed, the exhaust gases pass through the entire muffler system, keeping the sound subdued and driving comfort high even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled with the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure the best possible flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 2 round outlets\u003cbr\u003ePipe diameter: 70 mm \/ 2.75”\u003cbr\u003eEngine: 2.0 TFSI R4 Turbo EA888 Gen 3B\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 C8 (Typ 4K) 2018–2020\u003c\/li\u003e\n\u003cli\u003eAudi A7 C8 (Typ 4K8) 2018–2020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54605972930907,"sku":"FP-EXHAUST-040","price":1440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-040.png?v=1793628536"},{"product_id":"fmic-pro-valved-exhaust-system-audi-a6-a7-c7-3-0-tfsi-v6-2012-2018","title":"FMIC.Pro Valved Exhaust System - Audi A6, A7 C7 3.0 TFSI V6 2012-2018","description":"\u003ch3\u003eFMIC.Pro Valvetronic Exhaust System for Audi A6 \/ A7 C7 3.0 TFSI V6 2012–2018\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter and optimized muffler design produce a deep, rich sound under load while maintaining excellent driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely from SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure consistent geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear of the system. When the valves are closed, the exhaust gases flow through the entire muffler system, keeping the sound subdued and maintaining high driving comfort even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier exhaust sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust sound according to driving conditions and personal preferences. The valves are controlled by an included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure optimal flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 4 round outlets\u003cbr\u003ePipe diameter: 70 mm \/ 2.75”\u003cbr\u003eEngine: 3.0 TFSI V6 Turbocharger\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 C7 2012–2018\u003c\/li\u003e\n\u003cli\u003eAudi A6 C7 Facelift 2015–2018\u003c\/li\u003e\n\u003cli\u003eAudi A7 C7 2012–2018\u003c\/li\u003e\n\u003cli\u003eAudi A7 C7 Facelift 2015–2018\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606001275227,"sku":"FP-EXHAUST-043","price":1896.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-043-2.png?v=1793628697"},{"product_id":"fmic-pro-valved-exhaust-system-audi-s5-b9-3-0-tfsi-2016-2019","title":"FMIC.Pro Valved Exhaust System - Audi S5 B9 3.0 TFSI 2016-2019","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system for Audi S5 B9 3.0 TFSI 2016–2019\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure uniform geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas protection, ensuring neat, finished, and completely airtight joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas flow path at the rear of the system. When the valves are closed, the exhaust gases pass through the entire muffler system, keeping the sound subdued and driving comfort high even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure optimal flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 4 round outlets\u003cbr\u003ePipe diameter: 63 mm \/ 2.5”\u003cbr\u003eEngine: 3.0 TFSI V6 Turbo\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S5 Coupé (B9) 2016–2019\u003c\/li\u003e\n\u003cli\u003eAudi S5 Sportback (B9) 2016–2019\u003c\/li\u003e\n\u003cli\u003eAudi S5 Cabriolet (B9) 2017–2019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606045905243,"sku":"FP-EXHAUST-076","price":1939.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-076.png?v=1793628799"},{"product_id":"fmic-pro-valved-exhaust-system-audi-s4-b9-3-0-tfsi-2016-2019","title":"FMIC.Pro Valved Exhaust System - Audi S4 B9 3.0 TFSI 2016-2019","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system for Audi S4 B9 3.0 TFSI 2016–2019\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust gas flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure uniform geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring neat, finished, and completely sealed joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the path of the exhaust gases at the rear of the system. When the valves are closed, the exhaust gases pass through the entire muffler system, keeping the sound subdued and driving comfort high even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure the best possible flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 4 round outlets\u003cbr\u003ePipe diameter: 63 mm \/ 2.5”\u003cbr\u003eEngine: 3.0 TFSI V6 Turbo (EA839)\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S4 Sedan (B9) 2016–2019\u003c\/li\u003e\n\u003cli\u003eAudi S4 Avant (B9) 2016–2019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606080672091,"sku":"FP-EXHAUST-036","price":1939.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-036-2.png?v=1793628898"},{"product_id":"fmic-pro-valved-exhaust-system-audi-s4-b8-b8-5-3-0-tfsi-v6-2009-2016","title":"FMIC.Pro Valved Exhaust System - Audi S4 B8\/B8.5 3.0 TFSI V6 2009-2016","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system for Audi S4 B8 \/ B8.5 3.0 TFSI V6 2009–2016\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust gas flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure uniform geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring neat, finished, and completely sealed joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the path of the exhaust gases at the rear of the system. When the valves are closed, the exhaust gases pass through the entire muffler system, keeping the sound subdued and maintaining high driving comfort even during daily driving. When the valves are open, the exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo ensure optimal flow and exhaust system efficiency, the FMIC.Pro series also includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eExhaust tips: 4 round outlets\u003cbr\u003ePipe diameter: 70 mm \/ 2.75”\u003cbr\u003eEngine: 3.0 TFSI EA837, 333 hp\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S4 Sedan (B8) 2009–2012\u003c\/li\u003e\n\u003cli\u003eAudi S4 Avant (B8) 2009–2012\u003c\/li\u003e\n\u003cli\u003eAudi S4 Sedan (B8.5) 2012–2016\u003c\/li\u003e\n\u003cli\u003eAudi S4 Avant (B8.5) 2012–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606104854875,"sku":"FP-EXHAUST-037","price":1939.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-037__1.png?v=1793629005"},{"product_id":"fmic-pro-valved-exhaust-system-audi-r8-4-2l-v8-2008-2012","title":"FMIC.Pro Valved Exhaust System - Audi R8 4.2L V8 2008–2012","description":"\u003ch3\u003eFMIC.Pro electronically controlled cat-back exhaust system for Audi R8 4.2 V8 2008–2012\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and give the car a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter and optimized muffler design produce a deep and full sound under load while maintaining good driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which offers excellent resistance to corrosion and high operating temperatures. CNC-precision-bent pipes ensure uniform geometry and precise fitment to the car's original mounting points. Installation is straightforward and follows a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas protection, ensuring clean, finished, and completely airtight joints as well as excellent durability over long-term use.\u003c\/p\u003e\n\u003cp\u003eCNC-machined, 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure an even seal across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the path of exhaust gases at the rear of the exhaust system. When the valves are closed, exhaust gases flow through the entire muffler system, keeping the sound subdued and driving comfort high. When the valves are open, exhaust gases bypass the rear muffler, making the exhaust system's sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo maximize the performance potential of the FMIC.Pro cat-back exhaust system, it is recommended to combine it with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is designed for use with the car's original exhaust pipe outlets.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003ePipe diameter: 70 mm \/ 2.75”\u003cbr\u003eEngine: 4.2 FSI V8 (EA824)\u003cbr\u003eExhaust system type: Cat-back\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi R8 4.2 V8 2008–2012\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606137655643,"sku":"FP-EXHAUST-031","price":2169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-031_1253a8d6-57c3-40b8-a734-743560a8e9c9.png?v=1793629121"},{"product_id":"fmic-pro-valved-exhaust-system-audi-s3-8y-2-0-tfsi-2020","title":"FMIC.Pro Valved Exhaust System - Audi S3 8Y 2.0 TFSI 2020-","description":"\u003ch3\u003eFMIC.Pro electronically controlled cat-back exhaust system – Audi S3 8Y 2.0 TFSI 2020–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welded seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely airtight joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases flow through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro cat-back exhaust system is recommended for combination with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 TFSI R4 Turbo (EA888 Gen 4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S3 8Y 2.0 TFSI quattro 310 hp 2020-\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606199783771,"sku":"FP-EXHAUST-035","price":1449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-035-1_12cf0a4b-1703-4848-b8fb-5dd0028ed825.png?v=1793629409"},{"product_id":"fmic-pro-valved-exhaust-system-audi-a3-s3-8v-2-0-tsi-2012-2020","title":"FMIC.Pro Valved Exhaust System - Audi A3, S3 8V 2.0 TSI 2012-2020","description":"\u003ch3\u003eFMIC.Pro electronically controlled cat-back exhaust system – Audi A3 \/ S3 8V 2.0 TSI 2012–2020\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – which is essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases flow through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro cat-back exhaust system is recommended for combination with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: EA888 Gen 3 R4 2.0 Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A3 2.0 TFSI 2012–2020\u003c\/li\u003e\n\u003cli\u003eAudi S3 2.0 TFSI quattro 2013–2020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606232617307,"sku":"FP-EXHAUST-044","price":1449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-044-1.png?v=1793629478"},{"product_id":"fmic-pro-valved-exhaust-system-audi-rs3-8v-8y-2-5tfsi-2017-2023","title":"FMIC.Pro Valved Exhaust System - Audi RS3 8V\/8Y 2.5 TFSI 2017–2023","description":"\u003cp\u003e\u003cstrong\u003eValved exhaust system cat-back FMIC.Pro for\u003c\/strong\u003e \u003cstrong\u003eAudi RS3 2.5T\u003c\/strong\u003e \u003cstrong\u003eTFSI\u003c\/strong\u003e \u003cstrong\u003e2017-2023\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust gas flow and deliver a noticeably sportier sound character.\u003c\/p\u003e\n\u003cp\u003eThe 76mm \/ 3.0” piping diameter combined with the muffler configuration provides a deeper, fuller tone under load while maintaining driving comfort during normal operation – especially with the valves closed.\u003c\/p\u003e\n\u003cp\u003eThe system is manufactured entirely from SS304 stainless steel, resistant to corrosion and high operating temperatures. CNC mandrel-bent piping ensures consistent geometry and precise fitment to factory mounting points. Installation is straightforward and follows a plug \u0026amp; play concept. All welds are performed using TIG welding in an argon atmosphere, ensuring clean, aesthetic, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even gasket pressure across the entire surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronic exhaust valves that control exhaust gas routing in the rear section:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e - exhaust gases pass through the full silencing section, delivering a refined sound and high comfort for daily driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e - exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier exhaust tone.\u003c\/p\u003e\n\u003cp\u003eThis solution allows the driver to adjust exhaust characteristics depending on driving conditions and preferences. Valve control is operated via the included control module and two remote fobs, allowing instant switching between modes.\u003c\/p\u003e\n\u003cp\u003eFor maximum performance potential, it is recommended to pair the FMIC.Pro cat-back system with a high-flow downpipe (especially for turbocharged engines).\u003c\/p\u003e\n\u003cp\u003eExhaust tips: 2 oval\u003cbr\u003ePipe diameter: 76mm \/ 3.0”\u003c\/p\u003e\n\u003cp\u003eEngine: 2.5 TFSI R5 Turbo EA855 evo\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e- Audi RS3 Sportback Limousine 2.5 TFSI quattro 2017-2023\u003c\/p\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606251032923,"sku":"FP-EXHAUST-034","price":1569.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-034.png?v=1793629612"},{"product_id":"fmic-pro-valved-exhaust-system-audi-rsq3-2-5-tfsi-f3-quattro-2019-2026","title":"FMIC.Pro Valved Exhaust System - Audi RSQ3 2.5 TFSI F3 quattro 2019-2026","description":"\u003ch3\u003eFMIC.Pro valved cat-back exhaust system – Audi RS Q3 2.5 TFSI F3 quattro 2019–2026\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust gas flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while retaining ride comfort in normal driving – especially with the exhaust valves closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure consistent geometry and a precise fit to the original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle. All welds are TIG welded under argon shielding, which ensures clean, finished and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the joints. They provide high rigidity, reduce the risk of deformation caused by heat cycles and ensure even gasket pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system has integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good ride comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct and sportier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis allows the driver to adjust the sound of the exhaust system to the driving situation and personal preference. The exhaust valves are controlled with the included control unit and two remote controls, which allow instant switching between modes.\u003c\/p\u003e\n\u003cp\u003eTo maximise performance potential, the FMIC.Pro cat-back exhaust system is recommended to be combined with a higher-flowing downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTailpipes: 2 oval\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.5 TFSI R5 Turbo DNWA, 400 hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi RS Q3 (F3) 2.5 TFSI quattro 400 hp 2019-2026\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606281572699,"sku":"FP-EXHAUST-109","price":1569.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-109-1.png?v=1793629733"},{"product_id":"fmic-pro-valved-exhaust-system-audi-rs6-rs7-s6-s7-c7-4-0-tfsi-2012-2015","title":"FMIC.Pro Valved Exhaust System - Audi RS6, RS7, S6, S7 C7 4.0 TFSI 2012-2015","description":"\u003ch3\u003eFMIC.Pro electronically controlled exhaust system – Audi RS6 \/ RS7 \/ S6 \/ S7 C7 4.0 TFSI 2012–2015\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They offer high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even sealing pressure across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo ensure optimal flow and exhaust system efficiency, the FMIC.Pro series includes a high-flow downpipe. After installation, the engine's low-end torque and throttle response improve significantly, the turbocharger reaches boost pressure faster, and turbo lag is reduced. The engine produces more power and torque more effectively across the entire rev range.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 4.0 TFSI V8 Bi-Turbo (EA824)\u003c\/li\u003e\n\u003cli\u003eIncludes high-flow front pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi RS6 Avant (C7) 2013-2015\u003c\/li\u003e\n\u003cli\u003eAudi RS7 Sportback (C7) 2013-2015\u003c\/li\u003e\n\u003cli\u003eAudi S6 Sedan (C7) 2012-2014\u003c\/li\u003e\n\u003cli\u003eAudi S7 Sportback (C7) 2012-2014\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606302151003,"sku":"FP-EXHAUST-033","price":1894.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-033.png?v=1793629845"},{"product_id":"fmic-pro-valved-exhaust-system-audi-rs4-rs5-b8-4-2l-v8-2010-2015","title":"FMIC.Pro Valved Exhaust System - Audi RS4, RS5 B8 4.2L V8 2010-2015","description":"\u003ch3\u003eFMIC.Pro Valve-controlled cat-back exhaust system – Audi RS4 \/ RS5 B8 4.2L V8 2010–2015\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and produce a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct, and sportier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro cat-back exhaust system is recommended for combination with a more flow-efficient downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is compatible with the vehicle's original exhaust tips.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 4.2 FSI V8 (EA824)\u003c\/li\u003e\n\u003cli\u003eCompatible with original exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi RS5 B8 \/ B8.5 2010-2015\u003c\/li\u003e\n\u003cli\u003eAudi RS4 B8 Avant 2012-2015\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606314471771,"sku":"FP-EXHAUST-032","price":1934.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-032.png?v=1793629974"},{"product_id":"fmic-pro-valved-exhaust-system-audi-sq5-b9-5-3-0-tfsi-2020-2024","title":"FMIC.Pro Valved Exhaust System - Audi SQ5 B9.5 3.0 TFSI 2020-2024","description":"\u003ch3\u003eFMIC.Pro Valve-controlled cat-back exhaust system – Audi SQ5 B9.5 3.0 TFSI 2020–2024\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely from SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welded seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – which is essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro cat-back exhaust system is recommended for combination with a more free-flowing downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 TFSI V6 Turbo (EA839)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi SQ5 (FY) SUV B9.5 2020-2024\u003c\/li\u003e\n\u003cli\u003eAudi SQ5 Sportback (FY) B9.5 2021-2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606327382363,"sku":"FP-EXHAUST-038","price":1934.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-038.png?v=1793630083"},{"product_id":"fmic-pro-valved-exhaust-system-audi-tt-rs-8s-2-5-tfsi-quattro-2016-2023","title":"FMIC.Pro Valved Exhaust System - Audi TT RS 8S 2.5 TFSI quattro 2016-2023","description":"\u003ch3\u003eFMIC.Pro electronically controlled cat-back exhaust system – Audi TT RS 8S 2.5 TFSI quattro 2016–2023\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and deliver a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas shielding, ensuring neat, finished, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound profile according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro cat-back exhaust system is recommended for combination with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 oval\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngines:\n\u003cul\u003e\n\u003cli\u003e2.5 TFSI R5 Turbo DAZA, 400 hp\u003c\/li\u003e\n\u003cli\u003e2.5 TFSI R5 Turbo DNWA, 400 hp\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi TT RS 8S Coupé 2.5 TFSI quattro 400 hp DAZA 2016-2019\u003c\/li\u003e\n\u003cli\u003eAudi TT RS 8S Coupé 2.5 TFSI quattro 400 hp DNWA 2019-2023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606350418267,"sku":"FP-EXHAUST-108","price":1540.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-108-1_98143c6b-ffe1-4098-83ce-9decbbebce51.png?v=1793630191"},{"product_id":"fmic-pro-valved-exhaust-system-audi-tt-s-8j-2-0-tfsi-2006-2014","title":"FMIC.Pro Valved Exhaust System - Audi TT S 8J 2.0 TFSI 2006-2014","description":"\u003ch3\u003eFMIC.Pro electronically controlled cat-back exhaust system – Audi TT \/ TTS 8J 2.0 TFSI 2006–2014\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust flow and deliver a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust flow path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound profile according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro cat-back exhaust system is recommended for combination with a high-flow downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 TFSI quattro (CDLA, CDMA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi TT MK2 (8J3, 8J9) 2006-2014, 200-211 hp\u003c\/li\u003e\n\u003cli\u003eAudi TTS MK2 (8J3, 8J9) 2006-2014, 265 hp\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54606371455323,"sku":"FP-EXHAUST-039","price":1319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-039.png?v=1793630293"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-z4-e89-2-0t-n20-2011-2016","title":"FMIC.Pro Valved Catback Exhaust - BMW Z4 E89 2.0T N20 2011-2016","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW Z4 E89 2.0T N20 2011–2016\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – which is essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They offer high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a better-flowing downpipe front pipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 Turbo R4 (N20B20)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW Z4 sDrive20i (E89) 2011–2016\u003c\/li\u003e\n\u003cli\u003eBMW Z4 sDrive28i (E89) 2011–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630845808987,"sku":"FP-EXHAUST-017","price":1789.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-017.png?v=1793777778"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x5-x6-g05-g06-40i-b58-2018","title":"FMIC.Pro Valved Catback Exhaust - BMW X5, X6 G05\/G06 40i B58 2018-","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW X5 \/ X6 G05 \/ G06 40i B58 2018–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welded seams are TIG welded under argon gas protection, ensuring clean, finished, and completely airtight joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases flow through the entire muffler system, producing a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound profile according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a more free-flowing downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is compatible with the original exhaust tips.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 (B58B30)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X5 xDrive40i (G05) 2018–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630858031451,"sku":"FP-EXHAUST-018","price":1789.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-018-3.png?v=1793778035"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-z4-g29-m40i-3-0t-b58-2019","title":"FMIC.Pro Valved Catback Exhaust - BMW Z4 G29 M40i 3.0T B58 2019-","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW Z4 G29 M40i 3.0T B58 2019–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound profile according to the driving situation and their own preferences. The exhaust valves are controlled by an included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for pairing with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 (B58B30)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW Z4 M40i (G29) 340 hp \/ 500 Nm 2019–2020\u003c\/li\u003e\n\u003cli\u003eBMW Z4 M40i (G29) 387 hp \/ 500 Nm 2020–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630862782811,"sku":"FP-EXHAUST-015","price":2039.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-015_530fe5ff-4ab0-4e85-9554-7eb9a6bea025.png?v=1793778178"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-m5-f10-4-4l-v8-2011-2016","title":"FMIC.Pro Valved Catback Exhaust - BMW M5 F10 4.4L V8 2011-2016","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW M5 F10 4.4 V8 2011–2016\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring neat, finished, and completely sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by an included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a high-flow downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 4.4 V8 Bi-Turbo S63B44T0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M5 F10 4.4 560 hp 2011–2016\u003c\/li\u003e\n\u003cli\u003eBMW M5 Competition F10 575 hp 2013–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630930645339,"sku":"FP-EXHAUST-105","price":2019.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-105-1.png?v=1793778327"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x4-f26-20i-35i-2014-2018","title":"FMIC.Pro Valved Catback Exhaust - BMW X4 F26 20i 35i 2014-2018","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW X4 F26 20i \/ 28i \/ 30i \/ 35i 2014–2018\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and completely airtight joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases flow through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct, and sportier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a better-flowing downpipe front pipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngines:\n\u003cul\u003e\n\u003cli\u003e2.0T N20B20 (20i \/ 28i)\u003c\/li\u003e\n\u003cli\u003e3.0T N55B30 (35i)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X4 F26 20i \/ 28i \/ 30i 2014–2018\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630950601051,"sku":"FP-EXHAUST-021","price":1459.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-021.png?v=1793778432"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-m5-e60-m6-e63-5-0l-v10-2005-2010","title":"FMIC.Pro Valved Catback Exhaust - BMW M5 E60 \/ M6 E63 5.0L V10 2005-2010","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW M5 E60 \/ M6 E63 5.0 V10 2005–2010\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely airtight joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by an included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback exhaust system is recommended for combination with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 5.0 V10 S85B50, 507 hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M5 E60 2005–2010\u003c\/li\u003e\n\u003cli\u003eBMW M6 E63 2005–2010\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630955155803,"sku":"FP-EXHAUST-104","price":2019.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-104-2.png?v=1793778576"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x3-m-f97-x4-m-f98-3-0l-2019-2024","title":"FMIC.Pro Valved Axleback Exhaust - BMW X3 M F97 \/ X4 M F98 3.0L 2019-2024","description":"\u003ch3\u003eFMIC.Pro electronically controlled axle-back exhaust system – BMW X3 M F97 \/ X4 M F98 3.0 2019–2024\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro axle-back exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases flow through the entire muffler system, producing a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and personal preferences. The exhaust valves are controlled by an included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro exhaust system is recommended for combination with a high-flow downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 R6 Bi-Turbo S58, 480 hp \/ 510 hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X3 M F97 3.0 R6 480 hp 2019–2021\u003c\/li\u003e\n\u003cli\u003eBMW X3 M Competition F97 3.0 R6 510 hp 2019–2024\u003c\/li\u003e\n\u003cli\u003eBMW X4 M F98 3.0 R6 480 hp 2019–2021\u003c\/li\u003e\n\u003cli\u003eBMW X4 M Competition F98 3.0 R6 510 hp 2019–2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630958661979,"sku":"FP-EXHAUST-087","price":1789.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-087-2.png?v=1793778686"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x3-f25-2-8i-3-0i-n52-2010-2012","title":"FMIC.Pro Valved Catback Exhaust - BMW X3 F25 2.8i 3.0i N52 2010-2012","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW X3 F25 2.8i \/ 3.0i N52 2010–2012\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 51 mm (2.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on the plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and completely airtight joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a better-flowing downpipe front pipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 2 × 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 51 mm (2.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 R6 N52B30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X3 xDrive28i (F25) 258 hp\u003c\/li\u003e\n\u003cli\u003eBMW X3 xDrive30i (F25) 272 hp\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630962594139,"sku":"FP-EXHAUST-020","price":1589.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-020-4.png?v=1793778818"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-z4-e89-35i-35is-3-0t-n54-2009-2016","title":"FMIC.Pro Valved Catback Exhaust - BMW Z4 E89 35i\/35is 3.0T N54 2009-2016","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW Z4 E89 35i \/ 35is 3.0T N54 2009–2016\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welded seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features electronically controlled integrated exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a more free-flowing downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Twin-Turbo R6 (N54B30)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW Z4 sDrive35i (E89) 306 hp \/ 400 Nm 2009–2016\u003c\/li\u003e\n\u003cli\u003eBMW Z4 sDrive35is (E89) 340 hp \/ 450 Nm 2010–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630968230235,"sku":"FP-EXHAUST-016","price":1989.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-016-1.png?v=1793778915"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x3m-x4m-f97-f98-3-0l-s58-2019-2023","title":"FMIC.Pro Valved Catback Exhaust - BMW X3M \/ X4M F97, F98 3.0L S58 2019-2023","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW X3 M \/ X4 M F97 \/ F98 3.0 S58 2019–2023\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a more free-flowing downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Twin-Turbo R6 (S58B30T0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X3 M (F97) 3.0T S58 480 hp \/ 600 Nm 2019–2023\u003c\/li\u003e\n\u003cli\u003eBMW X4 M (F98) 3.0T S58 480 hp \/ 600 Nm 2019–2023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630974292315,"sku":"FP-EXHAUST-012","price":1939.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-012-1.png?v=1793779036"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-5-sarja-f10-f11-535i-3-0t-2010-2016","title":"FMIC.Pro Valved Catback Exhaust - BMW 5 Series F10, F11 535i 3.0T 2010-2016","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW 5 Series F10 \/ F11 535i 3.0T 2010–2016\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely airtight joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their own preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a more free-flowing downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 N55B30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 535i \/ 535i xDrive (F10) 2010–2016\u003c\/li\u003e\n\u003cli\u003eBMW 535i Touring \/ 535i xDrive Touring (F11) 2010–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54630981304667,"sku":"FP-EXHAUST-023","price":1799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-023-1_820af7ad-9a8d-44a6-a5c6-8ea59c47b888.png?v=1793779170"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-3-sarja-g20-g21-m340i-3-0t-b58-2019","title":"FMIC.Pro Valved Catback Exhaust - BMW 3 Series G20, G21 M340i 3.0T B58 2019-","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW 3 Series G20 \/ G21 M340i 3.0T B58 2019–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe 70 mm (2.75”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load, while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely sealed joints – essential for long-term durability.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide high rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronically controlled exhaust valves that regulate the exhaust gas path at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to the driving situation and their personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo maximize performance potential, the FMIC.Pro catback system is recommended for combination with a more flow-efficient downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 (B58B30M0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M340i \/ M340i xDrive Sedan (G20) 2019–\u003c\/li\u003e\n\u003cli\u003eBMW M340i \/ M340i xDrive Touring (G21) 2019–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631166804315,"sku":"FP-EXHAUST-011","price":1949.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-011-1.png?v=1793782546"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x3-x4-g01-g02-20i-30i-2-0t-2017-2024","title":"FMIC.Pro Valved Catback Exhaust - BMW X3, X4 G01\/G02 20i, 30i 2.0T 2017-2024","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW X3 \/ X4 G01 \/ G02 20i \/ 30i 2.0T 2017–2024\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas shielding, ensuring clean, finished, and fully sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase the rigidity of the structure, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases at the rear of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed position\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen position\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to pair the FMIC.Pro catback exhaust system with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 × 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: B48 2.0T R4\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X3 sDrive20i \/ xDrive20i (G01), 184 hp, 2017–2024\u003c\/li\u003e\n\u003cli\u003eBMW X3 xDrive30i (G01), 252 hp, 2017–2021\u003c\/li\u003e\n\u003cli\u003eBMW X3 xDrive30i facelift (G01), 245 hp, 2021–2024\u003c\/li\u003e\n\u003cli\u003eBMW X4 xDrive20i (G02), 184 hp, 2018–2024\u003c\/li\u003e\n\u003cli\u003eBMW X4 xDrive30i (G02), 252 hp, 2018–2021\u003c\/li\u003e\n\u003cli\u003eBMW X4 xDrive30i facelift (G02), 245 hp, 2021–2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631168770395,"sku":"FP-EXHAUST-019","price":1498.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-019.png?v=1793782654"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-5-sarja-g30-g31-540i-3-0t-2017-2023","title":"FMIC.Pro Valved Catback Exhaust - BMW 5 Series G30, G31 540i 3.0T 2017-2023","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW 5 Series G30 \/ G31 540i 3.0T 2017–2023\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welded seams are TIG welded under argon gas protection, ensuring clean, finished, and completely sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase the rigidity of the structure, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases in the rear section of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the sound characteristics of the exhaust system according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to combine the FMIC.Pro catback exhaust system with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 × 2 round\u003c\/li\u003e\n\u003cli\u003eAlso available with four individual exhaust tips (product code: FP-EXHAUST-077)\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 B58B30\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControls: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 540i \/ xDrive (G30), 2017–2023\u003c\/li\u003e\n\u003cli\u003eBMW 540i Touring \/ xDrive (G31), 2017–2023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631178600795,"sku":"FP-EXHAUST-022","price":1459.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-022-1.png?v=1793782761"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-3-sarja-g20-g21-320i-330i-2-0t-b48-2019","title":"FMIC.Pro Valved Catback Exhaust - BMW 3 Series G20, G21 320i\/330i 2.0T B48 2019-","description":"\u003ch3\u003eFMIC.Pro Valve-controlled catback exhaust system – BMW 3 Series G20 \/ G21 320i \/ 330i 2.0T B48 2019–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on the plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases at the rear of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e – exhaust gases flow through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for use with a high-flow downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 × 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0T B48 B48B20 \/ B48TU1\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 320i G20 \/ G21, 184 hp, 2019–\u003c\/li\u003e\n\u003cli\u003eBMW 325i G20, 184–200 hp, 2019–\u003c\/li\u003e\n\u003cli\u003eBMW 330i G20 \/ G21, 258 hp, 2019–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631185580379,"sku":"FP-EXHAUST-028","price":1559.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-028-1.png?v=1793782858"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-1-sarja-f20-120i-125i-2-0t-2012-2017","title":"FMIC.Pro Valved Catback Exhaust - BMW 1 Series F20 120i\/125i 2.0T 2012-2017","description":"\u003ch3\u003eFMIC.Pro Valve-Controlled Catback Exhaust System – BMW 1 Series F20 120i \/ 125i 2.0T 2012–2017\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and withstands high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases in the rear section of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed position\u003c\/strong\u003e – exhaust gases flow through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen position\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for use with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 × 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 Turbo R4 (N20B20) \/ (B48B20)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 120i F20 \/ LCI, 2012–2017\u003c\/li\u003e\n\u003cli\u003eBMW 125i F20 \/ LCI, 2012–2017\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631193510235,"sku":"FP-EXHAUST-030","price":1459.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-030-1.png?v=1793782964"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-5-sarja-f10-523i-2-5l-n52-2010-2011-aasia","title":"FMIC.Pro Valved Catback Exhaust - BMW 5 Series F10 523i 2.5L N52 2010-2011 (Asia)","description":"\u003ch3\u003eFMIC.Pro Valve-Controlled Catback Exhaust System – BMW 5 Series F10 523i 2.5L N52 2010–2011 (Asian Markets)\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and completely sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases at the rear of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed position\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen position\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended to be combined with a high-flow downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.5L R6 N52B25\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 523i (F10), 2010–2011, Asian market version\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631203340635,"sku":"FP-EXHAUST-024","price":1763.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-024-3.png?v=1793783071"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-3-sarja-f30-f31-320i-330i-2-0t-b48-2015-2019","title":"FMIC.Pro Valved Catback Exhaust - BMW 3 Series F30, F31 320i\/330i 2.0T B48 2015-2019","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – BMW 3 Series F30 \/ F31 320i \/ 330i 2.0T B48 2015–2019\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas protection, ensuring clean, finished, and completely sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases in the rear section of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed position\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen position\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for use with a high-flow downpipe, especially in turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 Turbo R4 B48N20\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControls: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 320i F30, 184 hp, 2015–2018\u003c\/li\u003e\n\u003cli\u003eBMW 320i F31, 184 hp, 2015–2019\u003c\/li\u003e\n\u003cli\u003eBMW 330i F30, 252 hp, 2015–2018\u003c\/li\u003e\n\u003cli\u003eBMW 330i F31, 252 hp, 2015–2019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631210254683,"sku":"FP-EXHAUST-026","price":1459.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-026-1.png?v=1793783173"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-4-sarja-g22-g23-420i-425i-430i-2-0t-2020","title":"FMIC.Pro Valved Catback Exhaust - BMW 4-Sarja G22, G23 420i\/425i\/430i 2.0T 2020-","description":"\u003ch3\u003eFMIC.Pro valved cat-back exhaust system – BMW 4 Series G22 \/ G23 \/ G26 420i \/ 425i \/ 430i 2.0T 2020–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust gas flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while retaining ride comfort in normal driving – especially with the exhaust valves closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure consistent geometry and a precise fit to the car's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle. All welds are TIG welded under argon shielding, which ensures clean, finished and fully sealed joints – these are essential for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the joints. They increase the rigidity of the structure, reduce the risk of deformation caused by heat cycles and ensure even clamping pressure on the gasket across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe system has integrated electrically operated exhaust valves that control the flow of exhaust gases at the rear of the system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, keeping the sound subdued and ride comfort high in everyday use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e – exhaust gases bypass the rear muffler, making the sound louder, more direct and sportier.\u003c\/p\u003e\n\u003cp\u003eThis allows the driver to adjust the sound characteristics of the exhaust system to the driving conditions and personal preference. The valves are controlled with the included control unit and two remote controls, which allow the mode to be changed instantly.\u003c\/p\u003e\n\u003cp\u003eFor the best performance potential, the FMIC.Pro cat-back exhaust system is recommended to be combined with a free-flowing downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTailpipes: 2 × 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0T B48 B48B20 \/ B48TU1\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electrically operated\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 420i G22 \/ G23 \/ G26, 2020–\u003c\/li\u003e\n\u003cli\u003eBMW 425i G22 \/ G23 \/ G26, 2020–\u003c\/li\u003e\n\u003cli\u003eBMW 430i G22 \/ G23 \/ G26, 2020–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631218348379,"sku":"FP-EXHAUST-029","price":1589.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-029-2.png?v=1793783301"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-4-sarja-f32-f33-420i-428i-2-0t-n20-2013-2016","title":"FMIC.Pro Valved Catback Exhaust - BMW 4 Series F32, F33 420i\/428i 2.0T N20 2013-2016","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – BMW 4 Series F32 \/ F33 420i \/ 428i 2.0T 2013–2016\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases at the rear of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for combination with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0T N20B20\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 4 Series F32 \/ F33 \/ F36 428i \/ 428i xDrive, 2013–2016\u003c\/li\u003e\n\u003cli\u003eBMW 4 Series F32 420i \/ 420i xDrive 2.0T N20, 2014–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631222608219,"sku":"FP-EXHAUST-027","price":1479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-027.png?v=1793783423"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-5-sarja-f10-f18-520i-525i-528i-2-0t-n20-2014-2017","title":"FMIC.Pro Valved Catback Exhaust - BMW 5 Series F10, F18 520i\/525i\/528i 2.0T N20 2014-2017","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – BMW 5 Series F10 \/ F18 520i \/ 525i \/ 528i 2.0T 2014–2017\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 63 mm (2.5”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases in the rear section of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for use with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 63 mm (2.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 Turbo R4 (N20B20)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 520i F10 \/ F18, 184 hp, 2014–2017\u003c\/li\u003e\n\u003cli\u003eBMW 525i F10 \/ F18, 218 hp, 2014–2016\u003c\/li\u003e\n\u003cli\u003eBMW 528i F10 \/ F18, 245 hp, 2014–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631229981019,"sku":"FP-EXHAUST-025","price":1479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-025-1.png?v=1793783534"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-5-sarja-g30-g31-540i-3-0t-2017-2024","title":"FMIC.Pro Valved Catback Exhaust Single Tips - BMW 5 Series G30, G31 540i 3.0T 2017-2023","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system with single exhaust tips – BMW 5 Series G30 \/ G31 540i 3.0T 2017–2023\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All weld seams are TIG welded under argon gas shielding, ensuring clean, finished, and completely airtight joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase the rigidity of the structure, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electric exhaust valves that control the flow of exhaust gases in the rear section of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed position\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, resulting in a subdued sound and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen position\u003c\/strong\u003e – exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to combine the FMIC.Pro catback exhaust system with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 4 round single tips\u003c\/li\u003e\n\u003cli\u003eAlso available in a version with dual exhaust tips (product code: FP-EXHAUST-022)\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 B58B30\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControls: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 540i \/ xDrive (G30), 2017–2023\u003c\/li\u003e\n\u003cli\u003eBMW 540i Touring \/ xDrive (G31), 2017–2023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631233716571,"sku":"FP-EXHAUST-077","price":1479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-077-1_106b0aa6-c399-47eb-ad62-68528eba5329.png?v=1793783667"},{"product_id":"fmic-pro-valved-catback-dual-x-pipe-exhaust-bmw-g80-g81-m3-g82-g83-m4-s58-2021","title":"FMIC.Pro Valved Catback Dual-X-Pipe Exhaust - BMW G80\/G81 M3, G82\/G83 M4 S58 2021-","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system with Dual X-Pipe design – BMW M3 G80 \/ G81 and M4 G82 \/ G83 3.0 S58 2021–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter combined with the muffler design produces a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and based on a plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints – these are essential factors for a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronically operated exhaust valves that control the flow of exhaust gases in the rear section of the exhaust system:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode\u003c\/strong\u003e – exhaust gases pass through the entire muffler system, keeping the sound subdued and maintaining high driving comfort for daily use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode\u003c\/strong\u003e – exhaust gases bypass the rear muffler, making the sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003ch3\u003eDual X-Pipe version\u003c\/h3\u003e\n\u003cp\u003eIn the Dual X-Pipe version, two separate pipes run through the center section of the exhaust system, joining via an X-Pipe design. This solution enables the exhaust pulses to interact between both sides of the system and produces a different soundscape compared to the Single Mid-Pipe version.\u003c\/p\u003e\n\u003cp\u003eThe design generally produces a sharper and more pronounced sound, with higher frequencies emphasized more. The difference is usually most noticeable as engine speed increases, when the sound becomes louder and more dynamic, giving the exhaust system a sportier character.\u003c\/p\u003e\n\u003cp\u003eThe Dual X-Pipe is a good choice for the driver who wants a dynamic and distinctly pronounced sound from their exhaust system instead of a deep and bass-heavy soundscape.\u003c\/p\u003e\n\u003cp\u003eIf you want a deeper and more bass-heavy sound with a single pipe in the center section of the exhaust system, check out the Single Mid-Pipe version (product code: FP-EXHAUST-088).\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to pair the FMIC.Pro catback exhaust system with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003eCenter section: Dual X-Pipe\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 R6 Twin Turbo S58\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electronically operated\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 \/ M3 Competition \/ M3 Competition M xDrive G80 Sedan, 2021–\u003c\/li\u003e\n\u003cli\u003eBMW M3 Competition M xDrive G81 Touring, 2022–\u003c\/li\u003e\n\u003cli\u003eBMW M4 \/ M4 Competition \/ M4 Competition M xDrive G82 Coupé, 2021–\u003c\/li\u003e\n\u003cli\u003eBMW M4 Competition M xDrive G83 Cabriolet, 2021–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631244759387,"sku":"FP-EXHAUST-106","price":2059.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-106-2__2.png?v=1793783874"},{"product_id":"fmic-pro-valved-catback-single-midpipe-exhaust-bmw-g80-g81-m3-g82-g83-m4-s58-2021","title":"FMIC.Pro Valved Catback Single Midpipe Exhaust - BMW G80\/G81 M3, G82\/G83 M4 S58 2021-","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system with Single Mid-Pipe design – BMW M3 G80 \/ G81 and M4 G82 \/ G83 3.0 S58 2021–\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe system's 76–89 mm (3.0–3.5”) pipe diameter and muffler design produce a deeper and fuller sound under load. At the same time, good driving comfort is maintained during normal driving, especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle.\u003c\/p\u003e\n\u003cp\u003eAll welded seams are TIG welded under argon gas shielding. This creates neat, finished, and completely sealed joints, which are essential for the long-term durability of the system.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronic exhaust valves that control the exhaust flow at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued soundscape and good driving comfort for daily driving.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct, and sportier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing the operating mode to be switched instantly.\u003c\/p\u003e\n\u003ch4\u003eSingle Mid-Pipe version\u003c\/h4\u003e\n\u003cp\u003eIn the Single Mid-Pipe version, a single pipe is used in the center section of the exhaust system. This design generally produces a deeper, fuller, and bass-oriented exhaust sound.\u003c\/p\u003e\n\u003cp\u003eThe difference is generally most noticeable at idle and low to mid-range RPMs, when the sound is deeper and more subdued. As RPMs increase, the system maintains its full and powerful sound without as distinct a transition to higher frequencies as the Dual X-Pipe version.\u003c\/p\u003e\n\u003cp\u003eSingle Mid-Pipe is a good choice for drivers who want a deeper and bass-oriented exhaust sound for both daily driving and more dynamic driving.\u003c\/p\u003e\n\u003cp\u003eIf you want a sharper and higher-frequency sound using two pipes and an X-Pipe section, check out the Dual X-Pipe version (product code FP-EXHAUST-106).\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback exhaust system with a high-flow downpipe. This is especially recommended for turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76–89 mm (3.0–3.5”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 R6 Twin Turbo S58\u003c\/li\u003e\n\u003cli\u003eSystem design: Single Mid-Pipe\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valve control: electronic, control unit and 2 remote controls included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 \/ M3 Competition \/ M3 Competition M xDrive G80 Sedan 2021–\u003c\/li\u003e\n\u003cli\u003eBMW M3 Competition M xDrive G81 Touring 2022–\u003c\/li\u003e\n\u003cli\u003eBMW M4 \/ M4 Competition \/ M4 Competition M xDrive G82 Coupé 2021–\u003c\/li\u003e\n\u003cli\u003eBMW M4 Competition M xDrive G83 Cabrio 2021–\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631263011163,"sku":"FP-EXHAUST-088","price":2059.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-088-1__3.png?v=1793783994"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-f87-m2-competiton-3-0t-s55-2018-2021","title":"FMIC.Pro Valved Catback Exhaust - BMW F87 M2 Competition 3.0T S55 2018-2021","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – BMW M2 Competition F87 3.0T S55 2018–2021\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and produce a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe system's 70 mm (2.75”) pipe diameter and muffler design produce a deeper and fuller sound under load. At the same time, good driving comfort is maintained during normal driving, especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle.\u003c\/p\u003e\n\u003cp\u003eAll weld seams are TIG welded under argon gas protection. This produces neat, finished, and completely airtight joints, which are essential for the long-term durability of the system.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronic exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued soundscape and good driving comfort for daily driving.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct, and sportier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback system in conjunction with a better-flowing downpipe. This is particularly recommended for turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Twin-Turbo R6 (S55B30T0)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valve control: electronic, control unit and 2 remotes included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M2 Competition F87 3.0T R6 S55, 410 hp \/ 550 Nm, 2018–2021\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631272939867,"sku":"FP-EXHAUST-010","price":1949.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-010-1.png?v=1793784104"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-f87-m2-3-0t-n55-2015-2018","title":"FMIC.Pro Valved Catback Exhaust - BMW F87 M2 3.0T N55 2015-2018","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – BMW M2 F87 3.0T N55 2015–2018\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe system's 70 mm (2.75”) pipe diameter and muffler design produce a deeper and fuller sound under load. At the same time, ride comfort is maintained during normal driving, especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle.\u003c\/p\u003e\n\u003cp\u003eAll welded joints are TIG welded under argon gas protection. This produces clean, finished, and completely sealed connections, which are essential for the long-term durability of the system.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronic exhaust valves that control exhaust flow at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good ride comfort for daily driving.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback system in conjunction with a high-flow downpipe. This is particularly recommended for turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 70 mm (2.75”)\u003c\/li\u003e\n\u003cli\u003eEngine: 3.0 Turbo R6 (N55B30T0)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valve control: electronic, control unit and 2 remote controls included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M2 F87 3.0T R6 N55, 370 hp \/ 465 Nm, 2015–2018\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631278510427,"sku":"FP-EXHAUST-009","price":1949.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-009.png?v=1793784208"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x5m-x6m-f95-f96-4-4t-s63-2019-2023","title":"FMIC.Pro Valved Catback Exhaust - BMW X5M, X6M F95\/F96 4.4T S63 2019-2023","description":"\u003ch3\u003eFMIC.Pro electronically controlled catback exhaust system – BMW X5 M F95 \/ X6 M F96 4.4T S63 2019–2023\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe system's 76 mm (3.0”) pipe diameter and muffler design produce a deeper and fuller sound under load. At the same time, good driving comfort is maintained during normal driving, especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle.\u003c\/p\u003e\n\u003cp\u003eAll welded seams are TIG welded under argon gas shielding. This creates neat, finished, and completely sealed joints, which are essential for the long-term durability of the system.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronic exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued soundscape and good driving comfort for everyday driving.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by an included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback system in conjunction with a high-flow downpipe. This is particularly recommended for turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust pipe ends: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 4.4 Twin-Turbo V8 (S63B44T4)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valve control: electronic, control unit and 2 remote controls included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X5 M (F95) 4.4T V8 S63 2019–2023\u003c\/li\u003e\n\u003cli\u003eBMW X6 M (F96) 4.4T V8 S63 2019–2023\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631291683163,"sku":"FP-EXHAUST-013","price":2049.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-013.png?v=1793784294"},{"product_id":"fmic-pro-valved-catback-exhaust-bmw-x5m-x6m-f85-f86-4-4t-s63-2015-2019","title":"FMIC.Pro Valved Catback Exhaust - BMW X5M, X6M F85\/F86 4.4T S63 2015-2019","description":"\u003ch3\u003eFMIC.Pro valved cat-back exhaust system – BMW X5 M F85 \/ X6 M F86 4.4T S63 2015–2019\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro cat-back exhaust system is designed to improve exhaust gas flow and produce a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe system's 76 mm (3.0”) pipe diameter and muffler design produce a deeper and fuller sound under load. At the same time, good ride comfort is retained in normal driving, especially with the exhaust valves closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure consistent geometry and a precise fit to the car's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle.\u003c\/p\u003e\n\u003cp\u003eAll welds are TIG welded under argon shielding. This produces clean, finished and fully sealed joints, which are essential for the long-term durability of the system.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the joints. They increase the rigidity of the structure, reduce the risk of deformation caused by heat cycles and ensure even clamping pressure on the gasket across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe system has integrated electronic exhaust valves that control the exhaust gas flow at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued sound and good ride comfort in everyday driving.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct and sportier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis allows the driver to adjust the sound of the exhaust system to the driving conditions and personal preference. The exhaust valves are controlled with the included control unit and two remote controls, which allow the mode to be changed instantly.\u003c\/p\u003e\n\u003cp\u003eFor the best performance potential, the FMIC.Pro cat-back exhaust system is recommended to be used together with a higher-flowing downpipe. This is especially recommended on turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical data\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTailpipes: 4 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 4.4 Twin-Turbo V8 (S63B44T2)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valve control: electronic, control unit and 2 remote controls included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBMW X5 M (F85) 4.4T V8 S63 2015–2019\u003c\/li\u003e\n\u003cli\u003eBMW X6 M (F86) 4.4T V8 S63 2015–2019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54631301808475,"sku":"FP-EXHAUST-014","price":2049.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-014-4.png?v=1793784380"},{"product_id":"fmic-pro-valved-catback-exhaust-volkswagen-golf-gti-mk6-2-0-tsi-2010-2013","title":"FMIC.Pro Valved Catback Exhaust - Volkswagen Golf GTI MK6 2.0 TSI 2010-2013","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – Volkswagen Golf GTI MK6 2.0 TSI 2010–2013\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier soundscape.\u003c\/p\u003e\n\u003cp\u003eThe system's 76 mm (3.0”) pipe diameter and muffler design produce a deeper and fuller sound under load. At the same time, ride comfort is maintained during normal driving, especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle.\u003c\/p\u003e\n\u003cp\u003eAll welded seams are TIG welded under argon gas shielding. This produces neat, finished, and completely airtight joints, which are essential for the long-term durability of the system.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe system features integrated electronic exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, producing a subdued soundscape and good ride comfort for daily driving.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by an included control unit and two remote controls, which allow the operating mode to be switched instantly.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback system in conjunction with a high-flow downpipe. This is particularly recommended for turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust tips: 2 round\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 TSI Turbo R4 (EA888 Gen 2)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valve control: electronic, control unit and 2 remote controls included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen Golf GTI MK6 2.0 TSI, 210 hp \/ 280 Nm, 2010–2013\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54641406542171,"sku":"FP-EXHAUST-045","price":1409.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-045.png?v=1793864378"},{"product_id":"fmic-pro-valved-catback-exhaust-volkswagen-golf-8-gti-2-0-tsi-2020-2024","title":"FMIC.Pro Valved Catback Exhaust - Volkswagen Golf 8 GTI 2.0 TSI 2020-2024","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – Volkswagen Golf 8 GTI 2.0 TSI (2020–2024)\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and provide a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter and muffler design produce a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle. All weld seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints as well as a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure uniform compression pressure on the gasket across the entire sealing surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electric exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, resulting in a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to the driving situation and their own preferences. The valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback exhaust system in conjunction with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutlets: 2 round exhaust tips\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 TSI Turbo R4 EA888 evo4\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControls: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen Golf GTI (MK8) 2.0 TSI, 245 hp \/ 370 Nm, 2020–2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54641411195227,"sku":"FP-EXHAUST-048","price":1429.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-048.png?v=1793864547"},{"product_id":"fmic-pro-valved-catback-exhaust-volkswagen-golf-r-mk7-mk7-5-2-0-tsi-2014-2020","title":"FMIC.Pro Valved Catback Exhaust - Volkswagen Golf R MK7\/MK7.5 2.0 TSI 2014-2020","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – Volkswagen Golf R MK7 \/ MK7.5 2.0 TSI (2014–2020)\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and provide a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter and muffler design produce a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints as well as a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire connection surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electric exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, resulting in a subdued sound and good driving comfort for daily use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to driving conditions and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for use with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutlets: 2 round exhaust tips\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0 TSI Turbo R4 EA888 Gen3\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen Golf R MK7 2.0 TSI, 300 hp \/ 380 Nm, 2014–2017\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf R MK7.5 2.0 TSI, 310 hp \/ 400 Nm, 2017–2020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54641413423451,"sku":"FP-EXHAUST-047","price":1429.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-047.png?v=1793864627"},{"product_id":"fmic-pro-valved-catback-exhaust-volkswagen-scirocco-r-2-0-tsi-2009-2017","title":"FMIC.Pro Valved Catback Exhaust - Volkswagen Scirocco R 2.0 TSI 2009-2017","description":"\u003ch3\u003eFMIC.Pro valve-controlled catback exhaust system – Volkswagen Scirocco R 2.0 TSI (2009–2017)\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and provide a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm (3.0”) pipe diameter and muffler design produce a deeper and fuller sound under load while maintaining driving comfort during normal driving – especially when the valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent pipes ensure uniform geometry and precise fitment to the vehicle's original mounting points. Installation is straightforward and follows the plug \u0026amp; play principle. All welding seams are TIG welded under argon gas protection, ensuring clean, finished, and fully sealed joints as well as a long service life.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They increase structural rigidity, reduce the risk of deformation caused by thermal cycles, and ensure even compression pressure on the gasket across the entire mating surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electric exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eValves closed:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, resulting in a subdued sound and good driving comfort for everyday use.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eValves open:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, resulting in a louder, more direct, and sportier sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's sound characteristics according to the driving situation and personal preferences. The valves are controlled by the included control unit and two remote controls, which allow for immediate switching between operating modes.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, the FMIC.Pro catback exhaust system is recommended for use with a better-flowing downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutlets: 2 round exhaust tips\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm (3.0”)\u003c\/li\u003e\n\u003cli\u003eEngine: 2.0T R4 EA113 (CDLA) \/ (CDLK)\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eExhaust valves: electric\u003c\/li\u003e\n\u003cli\u003eControl: control unit and 2 remote controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen Scirocco R (Type 13), 265 hp \/ 350 Nm, 2009–2014\u003c\/li\u003e\n\u003cli\u003eVolkswagen Scirocco R Facelift (Type 13), 280 hp \/ 350 Nm, 2014–2017\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54641415061851,"sku":"FP-EXHAUST-046","price":1429.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-046.png?v=1793864740"},{"product_id":"fmic-pro-valved-catback-exhaust-system-alfa-romeo-giulia-2-0t-952-2016-2024","title":"FMIC.Pro Valved Catback Exhaust System - Alfa Romeo Giulia 2.0T 952 2016-2024","description":"\u003ch3\u003eFMIC.Pro valve controlled catback exhaust system for Alfa Romeo Giulia 2.0T (952) 2016–2024\u003c\/h3\u003e\n\u003cp\u003eThe FMIC.Pro catback exhaust system is designed to improve exhaust flow and deliver a distinctly sportier sound.\u003c\/p\u003e\n\u003cp\u003eThe 76 mm \/ 3.0-inch pipe diameter combined with the muffler design produces a deeper and fuller sound under load. At the same time, ride comfort is maintained during normal driving, especially when the exhaust valves are closed.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system is made entirely of SS304 stainless steel, which resists corrosion and high operating temperatures. CNC-bent mandrel pipes ensure uniform pipe geometry and precise fitment to the vehicle's original mounting points. Installation is a straightforward plug \u0026amp; play solution.\u003c\/p\u003e\n\u003cp\u003eAll weld seams are TIG welded under argon gas shielding. This achieves neat, finished, and fully sealed joints, which are essential for the product's longevity.\u003c\/p\u003e\n\u003cp\u003eCNC-machined 10 mm thick flanges are used at the connection points. They provide excellent rigidity, reduce the risk of deformation caused by temperature fluctuations, and ensure even sealing pressure across the entire joint surface.\u003c\/p\u003e\n\u003cp\u003eThe exhaust system features integrated electronic exhaust valves that control the flow of exhaust gases at the rear:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClosed mode:\u003c\/strong\u003e Exhaust gases pass through the entire muffler system, resulting in a refined soundscape and pleasant ride comfort for everyday use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen mode:\u003c\/strong\u003e Exhaust gases bypass the rear muffler, making the sound louder, more direct, and sportier.\u003c\/p\u003e\n\u003cp\u003eThanks to this solution, the driver can adjust the exhaust system's soundscape according to driving conditions and personal preferences. The exhaust valves are controlled by the included control unit and two remote controls, allowing for immediate switching between modes.\u003c\/p\u003e\n\u003cp\u003eTo achieve the best performance potential, it is recommended to use the FMIC.Pro catback exhaust system with a high-flow downpipe, especially on turbocharged engines.\u003c\/p\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust system type: electronically controlled catback exhaust system\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 76 mm \/ 3.0”\u003c\/li\u003e\n\u003cli\u003eMaterial: SS304 stainless steel\u003c\/li\u003e\n\u003cli\u003eCNC-bent mandrel pipes\u003c\/li\u003e\n\u003cli\u003eTIG welding under argon gas shielding\u003c\/li\u003e\n\u003cli\u003eCNC-machined 10 mm thick flanges\u003c\/li\u003e\n\u003cli\u003eElectronically controlled exhaust valves\u003c\/li\u003e\n\u003cli\u003eControl unit and 2 remote controls included\u003c\/li\u003e\n\u003cli\u003eExhaust tips: 2 round\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEngine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2.0 Turbo R4 GME-T4, 200 \/ 280 hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAlfa Romeo Giulia (952) 2.0 Turbo 2016–2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FMIC","offers":[{"title":"Default Title","offer_id":54651697103195,"sku":"FP-EXHAUST-114","price":1750.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/FP-EXHAUST-114.png?v=1793954128"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/FP-EXHAUST-048.png?v=1793953852","url":"https:\/\/www.qtparts.fi\/en-gb\/collections\/fmic-pro-putkistot.oembed","provider":"QT Parts","version":"1.0","type":"link"}