{"title":"Skoda - MAF\/MAP Sensors","description":null,"products":[{"product_id":"ie-5-bar-map-sensor-kit-vw-mk7-audi-8v-mqb-ea888-3","title":"iE 5 BAR MAP Sensor Kit - VW MK7 \u0026 Audi 8V MQB EA888.3","description":"\u003ch3\u003eMQB High Boost Sensor Kit\u003c\/h3\u003e\n\u003cp\u003eThe IE 5 Bar Map Sensor Kit is designed to replace the factory 3 bar MAP (manifold absolute pressure) and PUT (pressure up throttle) sensors found on the VW \u0026amp; Audi MK7\/8V GTI, Golf R, GLI, A3, and S3 EA888 Gen 3 engines. Upgrading to the 5-bar MAP Sensor Kit increases the ECU's ability to read higher boost pressures. This is important when upgrading to larger turbos with high-boost output beyond the factory 3-bar limit. These sensors are direct install into the factory charge piping and intake manifold and are plug-and-play to the factory engine harness.\u003c\/p\u003e\n\u003cp\u003eIE's 5-Bar MAP Kit is an easy-to-install solution with two new sensors that directly replace the factory units. There are no finicky wiring harness conversions or hardware adapters. Both upgrades are built into our own sensor housings with an exact-fit replacement for the stock units. Upgrading your boost sensors couldn't be easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e \u003cstrong\u003eRequires a specific 5-bar sensor calibration in your ECU tune. Do not install with ECU tunes designed for stock sensors.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1X) IE 5 Bar MAP Sensor\u003c\/li\u003e\n\u003cli\u003e1X) IE PUT Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScaling Info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e11HPA= .5 Volts\u003c\/li\u003e\n\u003cli\u003e5000HPA= 4.5 Volts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":49629628006747,"sku":"IEELCI5","price":406.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/IEMQBGen35BarMapSensorKitIEELCI5.png?v=1733403119"},{"product_id":"bar-tek®-paivitetty-maf-sensori-1-8t-20v","title":"BAR-TEK® Upgraded MAF Sensor - 1.8T 20V","description":"\u003ch3\u003e1.8T Mass Air Flow Sensor – Upgrade Larger Turbo Applications\u003c\/h3\u003e\n\u003cp\u003eUpgrade the mass air flow meter (MAF) for 1.8T engines that have had a larger turbocharger replaced.\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003eupgrade MAF\u003c\/strong\u003e is larger in diameter and is capable of measuring significantly more air mass compared to the standard one. It is a critical upgrade when moving to larger turbos such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eK04-001\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGarrett GT30\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOr other high-current compressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can choose the MAF sensor according to the connector shape:\u003c\/p\u003e\n\u003ch4\u003eOval shape\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNewer 1.8T engines\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eME7 electronics\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSquare model\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOlder 1.8T engines\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMotronic 3.xx system\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eEngine programming (software) must be updated after installation!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Bar-Tek","offers":[{"title":"Oval","offer_id":51672442962267,"sku":"2118t278","price":219.0,"currency_code":"EUR","in_stock":true},{"title":"Square","offer_id":51672442995035,"sku":"2118t278.1","price":239.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/1445342204-5816f89d2_808d89f6-2dc7-491e-8512-ea29a458a8d7.png?v=1762158214"},{"product_id":"bosch-400-kpa-boost-sensor-map-sensor-1-8t-2-0l-tfsi","title":"Bosch 400 Kpa Boost Sensor (Map Sensor) 1.8T \u0026 2.0L TFSI","description":"\u003ch3\u003e1.8T \u0026amp; 2.0L TFSI 400 kPa MAP sensor (Bosch)\u003c\/h3\u003e\n\u003cp\u003eHigh-quality \u003cstrong\u003e400 kPa MAP sensor (boost pressure sensor)\u003c\/strong\u003e, enabling more accurate measurement at higher boost pressures. Widely compatible with 1.8T, 2.0 TSI, and 2.0 TFSI engines.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement range up to over \u003cstrong\u003e1.5 bar boost pressure\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIdeal for tuned engines\u003c\/li\u003e\n\u003cli\u003eReplaces the standard sensor that does not measure over 1.5 bar\u003c\/li\u003e\n\u003cli\u003eManufacturer: Bosch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy upgrade?\u003c\/h4\u003e\n\u003cp\u003eThe standard MAP sensor is limited to approximately 1.5 bar. If your engine produces boost pressure higher than this, this 400 kPa sensor is required to ensure correct measurement and engine control operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The engine control unit (ECU) software must be updated to match the calibration of the new sensor.\u003c\/p\u003e\n\u003ch4\u003eCalibration\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.4 V = 412.432\u003c\/li\u003e\n\u003cli\u003e4.65 V = 4131.200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003ch4\u003eAudi\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eA1 \/ S1 (8X) 2010–2018 – 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eA3 \/ S3 \/ RS3 (8L, 8P) 1996–2013 – 1.8T \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eA4 \/ S4 \/ RS4 (B7, B8) 2004–2015 – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eA5 \/ S5 \/ RS5 (8T) 2007–2016 – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eA6 \/ S6 \/ RS6 (C6, C7) 2004–2018 – 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eQ3 \/ RS Q3 (8U) 2011–2018 – 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eQ5 \/ SQ5 (8R) 2008–2017 – 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eTT \/ TTS \/ TT RS (8J) 2006–2014 – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSeat\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAltea (2004–2015) – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eExeo (2008–2013) – 1.8T \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eLeon II (2005–2012) – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eToledo III (2004–2009) – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eŠkoda\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOctavia I \u0026amp; II (1996–2013) – 1.8T \/ 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eSuperb II (2008–2015) – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eYeti (2009–2017) – 1.8 TFSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVolkswagen\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGolf V \u0026amp; VI (2003–2012) – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eJetta \/ Bora \/ Vento (1998–2018) – 1.8T \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003ePassat B6, B7, CC (2005–2016) – 1.8 TFSI \/ 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003ePolo V (2009–2014) – 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eScirocco III (2008–2017) – 2.0 TFSI\u003c\/li\u003e\n\u003cli\u003eTiguan I (2007–2016) – 2.0 TFSI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":52841579741531,"sku":"4047024439016","price":109.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/1-8t-2-0l-tfsi-400-kpa-ladedrucksensor-map-sensor-bosch.png?v=1776685006"},{"product_id":"400-kpa-map-sensor-2-0l-tsi-ea888-gen-3-mqb","title":"400 Kpa Map Sensor for Charge Pipe - 2.0L TSI EA888 Gen.3 MQB","description":"\u003ch3\u003e2.0L TSI EA888 Gen.3 MQB 400 kPa Manifold Absolute Pressure (MAP) Sensor – for charge pipe\u003c\/h3\u003e\n\u003cp\u003eHigh-quality \u003cstrong\u003e400 kPa MAP sensor for the charge pipe\u003c\/strong\u003e, specifically designed for 3rd generation EA888 2.0 TSI (MQB) engines. Suitable for high boost pressures, over 2 bar.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement range for over \u003cstrong\u003e2 bar boost pressure\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eInstallation in the \u003cstrong\u003echarge pipe\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eEA888 Gen.3 2.0 TSI MQB engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eManufactured for precise and reliable measurement in tuned engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003egeneration EA888 engines have \u003cstrong\u003etwo boost pressure sensors\u003c\/strong\u003e as standard:\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003eone in the charge pipe\u003c\/li\u003e\n\u003cli\u003eone in the intake manifold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe standard sensor cannot measure boost pressures above 2 bar, so this 400 kPa sensor is an \u003cstrong\u003eessential upgrade\u003c\/strong\u003e for more highly boosted engines.\u003c\/p\u003e\n\u003ch4\u003eRecommendation\u003c\/h4\u003e\n\u003cp\u003eFor best and most consistent operation, it is recommended to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ealso replace the \u003cstrong\u003eintake manifold MAP sensor\u003c\/strong\u003e with a corresponding 400 kPa version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Engine Control Unit (ECU) map must be adjusted according to the calibration of the new sensor.\u003c\/p\u003e\n\u003ch4\u003eCalibration\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.4 V = 412.432\u003c\/li\u003e\n\u003cli\u003e4.65 V = 4131.200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bar-Tek","offers":[{"title":"Default Title","offer_id":52841586098523,"sku":"21tsi134","price":114.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/2-0l-tsi-ea888-gen-3-mqb-400-kpa-ladedrucksensor-map-sensor-druckrohrwydutmmmt29bl.png?v=1776685203"},{"product_id":"350-kpa-map-sensor-imusarja-2-0l-tsi-ea888-gen-3-mqb","title":"350 Kpa MAP Sensor (Intake Manifold) - 2.0L TSI EA888 Gen.3 MQB","description":"\u003ch3\u003e2.0 TSI EA888 Gen.3 MQB 350 kPa Boost Pressure Sensor (MAP) – for the intake side\u003c\/h3\u003e\n\u003cp\u003eHigh-quality \u003cstrong\u003e350 kPa MAP sensor for the intake manifold (suction pipe \/ intake manifold)\u003c\/strong\u003e, designed for 3rd generation EA888 2.0 TSI (MQB) engines. Enables accurate measurement at boost pressures above 2 bar.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurement range for \u003cstrong\u003eboost pressure over 2 bar\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eInstallation in the \u003cstrong\u003eintake manifold\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003eEA888 Gen.3 2.0 TSI MQB engines\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAccurate and reliable measurement in tuned configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Data\u003c\/h4\u003e\n\u003cp\u003eEA888 Gen.3 engines use two boost pressure sensors:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eone in the charge pipe\u003c\/li\u003e\n\u003cli\u003eone in the intake manifold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe standard sensor cannot handle boost pressures above 2 bar, so this 350 kPa sensor is an \u003cstrong\u003eessential upgrade\u003c\/strong\u003e for more powerful configurations.\u003c\/p\u003e\n\u003ch4\u003eRecommendation\u003c\/h4\u003e\n\u003cp\u003eFor correct and balanced tuning, it is recommended to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ealso replace the \u003cstrong\u003echarge pipe MAP sensor\u003c\/strong\u003e with a corresponding 400 kPa version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The engine control unit (ECU) map must be adjusted to match the calibration of the new sensor.\u003c\/p\u003e\n\u003ch4\u003eCalibration Curve\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.5 V = 199.997\u003c\/li\u003e\n\u003cli\u003e4.5 V = 3499.949\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bar-Tek","offers":[{"title":"Default Title","offer_id":52841599631707,"sku":"21tsi166","price":149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/21tsi166-2_0l-tsi-ea888-gen_3-mqb-400-kpa-ladedrucksensor.png?v=1776685443"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/skoda_logo_7c6d4559-1fad-4839-a488-ca7d1f4b3fa2.png?v=1794679892","url":"https:\/\/www.qtparts.fi\/en-gb\/collections\/skoda-maf-map-anturit.oembed","provider":"QT Parts","version":"1.0","type":"link"}