{"title":"Toyota - Engine breather","description":null,"products":[{"product_id":"radium-engineering-catch-can-kit-ccv-toyota-supra-mk5","title":"Radium Engineering Catch Can Kit CCV - Toyota Supra MK5","description":"\u003ch3\u003eCCV Catch Can Kit for Toyota MK5 GR Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota MK5 GR Supra\u003c\/li\u003e\n\u003cli\u003eAll models and trim levels\u003c\/li\u003e\n\u003cli\u003eLeft-hand drive and right-hand drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to two factory holes on the front radiator support and is specifically designed to clear factory and aftermarket strut braces. This mounting location also remains clear of common performance upgrades such as larger turbochargers and aftermarket intake tubing.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the CCV system experiences atmospheric pressure. Under high engine load (WOT), crankcase gases flow into the intake system carrying oil vapor and sludge. Without a catch can, these contaminants accumulate in the intake piping and intercooler, reducing intercooler thermal efficiency and overall engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components while supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe CCV catch can kit does not address blow-by from the PCV side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eCompatible with and recommended for use alongside the MK5 GR Supra PCV Catch Can Kit (Part Number: 20-0749).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53488288498011,"sku":"USA-RAD-20-0750","price":425.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/catch-can-kit-ccv-mk5-supra-radium-engineering.png?v=1782989338"},{"product_id":"radium-engineering-dual-catch-can-kit-toyota-gr-supra-mk5","title":"Radium Engineering Dual Catch Can Kit - Toyota GR Supra MK5","description":"\u003ch3\u003eDual Catch Can Kit for Toyota MK5 GR Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota MK5 GR Supra\u003c\/li\u003e\n\u003cli\u003eAll models and trim levels\u003c\/li\u003e\n\u003cli\u003eLeft-hand drive and right-hand drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0751 Dual Catch Can Kit, Toyota MK5 GR Supra\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eFor maximum engine protection, the 20-0751 Dual Catch Can Kit combines both the dedicated PCV and CCV catch can systems.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline with the positive crankcase ventilation system to capture oil vapor, moisture, unburned fuel, and other blow-by contaminants during idle, cruising, and deceleration while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can installs inline with the crankcase breather system to capture oil vapor and sludge generated during high engine loads before they can contaminate the intake piping and turbocharger system.\u003c\/p\u003e\n\u003cp\u003eTogether, both Fluid Lock® catch cans provide complete crankcase ventilation protection, helping maintain cleaner intake components while supporting long-term engine performance and reliability.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53515752538459,"sku":"USA-RAD-20-0751","price":682.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/dual-catch-can-kit-mk5-supra-radium-engineering.jpg?v=1783288057"},{"product_id":"radium-engineering-catch-can-kit-ccv-mk5-supra-radium","title":"Radium Engineering Catch Can Kit CCV - MK5 Supra Radium","description":"\u003ch3\u003eCCV Catch Can Kit for Toyota MK5 GR Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota GR Supra (MK5)\u003c\/li\u003e\n\u003cli\u003eAll models, trims, right-hand drive, and left-hand drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe CCV Catch Can Kit mounts to two factory mounting holes on the front radiator support. Its location is specifically designed to provide clearance for strut braces while remaining clear of aftermarket turbochargers and intake tubing.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline between the factory crankcase vent (CCV) port and the intake pipe, retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the CCV system experiences atmospheric pressure. Under high engine load (WOT), crankcase gases flow toward the intake system carrying oil vapor and sludge that would normally contaminate the intake piping and intercooler, reducing intercooler thermal efficiency and overall engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components and supporting long-term engine reliability.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe CCV catch can kit does not address blow-by from the PCV side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eCompatible with and recommended to be used alongside the 20-0749 PCV Catch Can Kit for complete crankcase ventilation protection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531564867931,"sku":"USA-RAD-20-0750","price":418.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/catch-can-kit-ccv-mk5-supra-radium-engineering.jpg?v=1783426937"},{"product_id":"radium-engineering-catch-can-kit-ccv-toyota-gr-corolla-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Toyota GR Corolla Fluid Lock","description":"\u003ch3\u003eCCV Catch Can Kit for Toyota GR Corolla Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2023+ Toyota GR Corolla (all models, trims, and engines)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory threaded mounting points and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe CCV Catch Can Kit installs inline with the factory crankcase ventilation system to capture oil vapor, moisture, and other blow-by contaminants before they enter the intake system.\u003c\/p\u003e\n\u003cp\u003eBy removing these contaminants, the Fluid Lock® catch can helps reduce oil buildup in the intake tract while maintaining cleaner intake components and supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe vehicle-specific mounting bracket provides a clean, OEM-style installation using factory mounting points.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eGR Corolla-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003e10AN to SAE quick connect fittings\u003c\/li\u003e\n\u003cli\u003eSAE quick connect hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531688665435,"sku":"USA-RAD-20-0759-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0759-FL.jpg?v=1783427876"},{"product_id":"radium-engineering-catch-can-kit-ccv-toyota-mk5-supra-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Toyota MK5 Supra Fluid Lock","description":"\u003ch3\u003eCCV Catch Can Kit for Toyota MK5 GR Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota GR Supra (MK5)\u003c\/li\u003e\n\u003cli\u003eTurbocharged 3.0L B58 engine only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0750-FL CCV Catch Can Kit, Toyota MK5 GR Supra\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0750-FL CCV Catch Can Kit mounts to two factory mounting holes on the front radiator support. Its location is specifically designed to provide clearance for factory and aftermarket strut braces while remaining clear of upgraded turbochargers and intake tubing.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline between the factory crankcase vent (CCV) port and the intake pipe, retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the CCV system experiences atmospheric pressure. Under high engine load (WOT), crankcase gases flow toward the intake system carrying oil vapor and sludge that would normally contaminate the intake piping and intercooler, reducing intercooler thermal efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake system, helping maintain cleaner intake components and supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eFor complete crankcase ventilation protection, Radium Engineering recommends pairing this kit with the 20-0749-FL PCV Catch Can Kit as part of the 20-0751-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531868266843,"sku":"USA-RAD-20-0750-FL","price":423.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0750-FL.jpg?v=1783428490"},{"product_id":"radium-engineering-catch-can-kit-pcv-toyota-mk5-supra-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Toyota MK5 Supra Fluid Lock","description":"\u003ch3\u003ePCV Catch Can Kit for Toyota MK5 GR Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota GR Supra (MK5)\u003c\/li\u003e\n\u003cli\u003eTurbocharged 3.0L B58 engine only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0749-FL PCV Catch Can Kit, Toyota MK5 GR Supra\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0749-FL PCV Catch Can Kit installs inline between the factory ventilation valve and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eThe catch can mounts to threaded bosses on the front radiator support, providing excellent clearance for aftermarket components such as upgraded turbochargers and intake tubing.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures metered crankcase vapors, unburned fuel, and oil sludge before they enter the turbocharger inlet, helping maintain cleaner intake components while promoting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eFor complete crankcase ventilation protection, Radium Engineering recommends pairing this kit with the 20-0750-FL CCV Catch Can Kit as part of the 20-0751-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53532005269851,"sku":"USA-RAD-20-0749-FL","price":288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0749-FL.jpg?v=1783429555"},{"product_id":"radium-engineering-dual-catch-can-kit-toyota-mk5-supra-fluid","title":"Radium Engineering Dual Catch Can Kit - Toyota MK5 Supra Fluid","description":"\u003ch3\u003eDual Catch Can Kit for Toyota MK5 GR Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota GR Supra (MK5)\u003c\/li\u003e\n\u003cli\u003eTurbocharged 3.0L B58 engine only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting locations and integrate seamlessly with surrounding engine components. They operate as fully closed-loop systems and do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eNo cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0751-FL Dual Catch Can Kit, Toyota MK5 GR Supra\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0751-FL Dual Catch Can Kit combines both the PCV and CCV catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can installs inline between the ventilation valve and the intake pipe, while the CCV catch can installs inline between the crankcase vent port and the intake pipe. Both systems mount to factory locations on the front radiator support, providing excellent clearance for aftermarket components such as upgraded turbochargers, intake tubing, and strut braces.\u003c\/p\u003e\n\u003cp\u003eWorking together, the two Fluid Lock® catch cans capture oil vapor, moisture, unburned fuel, and blow-by contaminants before they enter the intake system. This helps reduce oil buildup in the intake piping and intercooler, maintaining intercooler efficiency while supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53532034728283,"sku":"USA-RAD-20-0751-FL","price":702.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0751-FL.jpg?v=1783429761"},{"product_id":"radium-engineering-dual-catch-can-kit-toyota-tundra-07-21-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Toyota Tundra 07-21 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Toyota Tundra 2007–2021 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2007–2021 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e3UR-FE engine only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThis installation kit is specifically designed for the 2007–2021 Toyota Tundra equipped with the 3UR-FE engine. It installs using factory mounting locations with no drilling or permanent vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eIf using a TRD or other aftermarket supercharger, verify that the catch can mounting locations are not occupied by intercooler plumbing or other supercharger components before installation.\u003c\/p\u003e\n\u003cp\u003eAn oil catch can is an essential upgrade for protecting the engine from crankcase blow-by generated during everyday driving. Excess oil vapors entering the intake system can reduce performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0240-FL Dual Catch Can Kit, Toyota Tundra, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0240-FL Dual Catch Can Kit combines both the PCV and Crankcase catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eWorking together, the two independent Fluid Lock® catch cans capture oil vapor, moisture, fuel residue, and blow-by contaminants before they reach the intake system. This helps maintain cleaner intake components, supports long-term engine reliability, and improves overall engine performance.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554238259547,"sku":"USA-RAD-20-0240-FL","price":638.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0240-FL_1.jpg?v=1783629511"},{"product_id":"radium-engineering-dual-catch-can-kit-2022-subaru-brz-toyota-gr86-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - 2022+ Subaru BRZ \/ Toyota GR86 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for 2022+ Subaru BRZ \/ Toyota GR86 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2022+ Toyota GR86\u003c\/li\u003e\n\u003cli\u003e2022+ Subaru BRZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential for protecting the engine from crankcase blow-by generated during aggressive driving. Excess oil vapors entering the intake system can reduce performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReduces oil consumption, helping maintain higher effective octane\u003c\/li\u003e\n\u003cli\u003eCleaner intake air supports improved engine performance\u003c\/li\u003e\n\u003cli\u003eHelps prevent sludge buildup in the intake system\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0913-FL Dual Catch Can Kit, 2022+ BRZ\/GR86, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0913-FL Dual Catch Can Kit combines both the PCV and CCV catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can mounts on the right-hand side of the engine bay and installs inline with the 5\/8-inch positive crankcase ventilation (PCV) valve. During idle, steady-state cruising, and deceleration, it captures crankcase vapors, unburned fuel, and oil sludge before they enter the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can protects the crankcase breather system by capturing oil vapors and blow-by gases before they reach the intake system, helping maintain cleaner intake components and supporting long-term engine performance.\u003c\/p\u003e\n\u003cp\u003eThe catch cans are strategically positioned for compatibility with both right-hand drive and left-hand drive vehicles. Minor brake line clearance is required for right-hand drive installations. All components mount using factory holes and bosses with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eBoth catch cans operate independently in a fully closed-loop system. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing oil vapors from entering the cabin.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554370511195,"sku":"USA-RAD-20-0913-FL","price":610.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0913-FL.jpg?v=1783630971"},{"product_id":"radium-engineering-dual-catch-can-kit-scion-fr-s-subaru-brz-toyota-gt86-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Scion FR-S \/ Subaru BRZ \/ Toyota GT86 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Scion FR-S \/ Subaru BRZ \/ Toyota GT86 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2012–2021 Toyota 86\u003c\/li\u003e\n\u003cli\u003e2012–2020 Subaru BRZ\u003c\/li\u003e\n\u003cli\u003e2012–2016 Scion FR-S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential for protecting the engine from crankcase blow-by generated during aggressive driving. Excess oil vapors entering the intake system can reduce performance and contaminate intake components.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReduces oil consumption, helping maintain higher effective octane\u003c\/li\u003e\n\u003cli\u003eCleaner intake air supports improved engine performance\u003c\/li\u003e\n\u003cli\u003eHelps prevent sludge buildup in the intake system\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0903-FL Dual Catch Can Kit, FR-S\/BRZ\/GT86, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0903-FL Dual Catch Can Kit combines both the PCV and CCV catch can systems to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can mounts on the right-hand side of the engine bay and installs inline with the 3\/8-inch positive crankcase ventilation (PCV) valve. During idle, steady-state cruising, and deceleration, it captures crankcase vapors, unburned fuel, and oil sludge before they enter the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can mounts on the left-hand side of the engine bay and installs inline with the 1\/2-inch crankcase breather port. During wide-open throttle (WOT), it captures oil vapor and blow-by gases before they reach the intake system. On turbocharged or supercharged engines, it also helps prevent oil accumulation in the intercooler and charge piping, preserving cooling efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe catch cans are strategically positioned for compatibility with both right-hand drive and left-hand drive vehicles. Minor brake line clearance is required for right-hand drive installations. All components mount using factory holes and bosses with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eBoth catch cans operate independently in a fully closed-loop system. They do not vent to atmosphere (VTA), making them emissions and track legal while maintaining negative crankcase pressure and preventing oil vapors from entering the cabin.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554384077147,"sku":"USA-RAD-20-0903-FL","price":610.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0903-FL.jpg?v=1783631098"},{"product_id":"radium-engineering-dual-catch-can-kit-toyota-mk4-supra-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Toyota MK4 Supra Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Toyota MK4 Supra Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eToyota MK4 Supra\u003c\/li\u003e\n\u003cli\u003eCompatible with right-hand drive and left-hand drive models\u003c\/li\u003e\n\u003cli\u003eCompatible with stock twin turbos and large single turbo setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThis dual catch can system uses a true closed-loop PCV design. Both catch cans operate independently and vent back into the engine rather than to atmosphere (VTA), making the system emissions and track legal.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop design removes oil and sludge from crankcase gases before they are returned to the engine for combustion. It also maintains negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0387-FL Dual Catch Can Kit, MK4 Supra, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eOne catch can installs inline with the positive crankcase ventilation (PCV) valve while retaining full factory functionality. During idle, cruising, and deceleration, it captures crankcase vapors, unburned fuel, and oil sludge before they enter the intake manifold. Because Radium catch cans are pressure sealed, they are ideal for turbocharged applications and can be connected directly to the intake manifold. The PCV system uses 6AN hose and fittings.\u003c\/p\u003e\n\u003cp\u003eThe second catch can installs inline with the crankcase ventilation (CCV) port. During wide-open throttle (WOT), it captures oil and blow-by gases before they reach the intake pipe and intercooler, helping maintain intercooler efficiency and engine performance. The CCV system uses 8AN hose and fittings.\u003c\/p\u003e\n\u003cp\u003eTo accommodate the many factory variations of the MK4 Supra, the kit includes three vehicle-specific mounting brackets. These provide installation options for right-hand drive and left-hand drive vehicles, stock twin turbos, large single turbo conversions, updated brake master cylinders, and early TRAC-equipped models.\u003c\/p\u003e\n\u003cp\u003eAll brackets utilize factory mounting points, requiring no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo oil catch cans with integrated condensers and dipsticks\u003c\/li\u003e\n\u003cli\u003eThree Supra-specific aluminum mounting brackets\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eHose for custom installations\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with Radium Engineering 2JZ press-in valve cover fittings. Those fittings use 10AN connections, while this kit is designed for 6AN and 8AN hose sizes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554426478939,"sku":"USA-RAD-20-0387-FL","price":595.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0387-FL.jpg?v=1783631661"},{"product_id":"radium-engineering-catch-can-kit-pcv-mk5-supra","title":"Radium Engineering Catch Can Kit PCV - MK5 Supra","description":"\u003ch3\u003eCatch Can Kit PCV MK5 Supra Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2020+ Toyota GR Supra (A90\/MK5)\u003c\/li\u003e\n\u003cli\u003eCompatible with all models, trims, right-hand drive and left-hand drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid, and no cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can installs inline between the engine ventilation valve and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eIt mounts to factory threaded bosses on the front radiator support, providing a clean installation while maintaining clearance for common aftermarket upgrades such as larger turbochargers and intake systems.\u003c\/p\u003e\n\u003cp\u003eThe catch can captures metered crankcase vapors, unburned fuel, and oil sludge before they enter the turbocharger inlet, helping maintain a cleaner intake system and improved engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eMK5 GR Supra-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with and recommended for use alongside the Radium CCV Catch Can Kit (20-0750) for complete crankcase ventilation protection.\u003c\/li\u003e\n\u003cli\u003eNo additional inline check valve is required because Radium catch cans are pressure sealed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554474254683,"sku":"USA-RAD-20-0749","price":282.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/catch-can-kit-pcv-mk5-supra-radium-engineering.jpg?v=1783632292"},{"product_id":"radium-engineering-catch-can-kit-ccv-toyota-tundra-07-21-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Toyota Tundra 07-21 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Toyota Tundra 07-21 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2007–2021 Toyota Tundra (3UR-FE Engine)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThis kit is specifically designed for the 2007–2021 Toyota Tundra equipped with the 3UR-FE engine. Installation requires no drilling or permanent vehicle modifications.\u003c\/p\u003e\n\u003cp\u003eIf your vehicle is equipped with a TRD or other aftermarket supercharger, verify that the catch can mounting location is not occupied by intercooler piping or other supercharger components before installation.\u003c\/p\u003e\n\u003cp\u003eAn oil catch can helps protect the engine from excessive crankcase blow-by generated during normal and performance driving. By removing oil-contaminated vapors before they re-enter the intake system, it helps maintain engine performance and reduce carbon buildup.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0239-FL Catch Can Kit, CCV, Toyota Tundra, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0239-FL CCV Catch Can Kit includes two mounting brackets. One bracket is used when installing the CCV kit by itself, while the other is used when it is paired with the PCV catch can kit.\u003c\/p\u003e\n\u003cp\u003eThe CCV system installs inline with the 1\/2-inch valve cover breather port.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), vacuum in the intake system would normally draw crankcase vapors, unburned fuel, and oil sludge into the air intake pipe.\u003c\/p\u003e\n\u003cp\u003eFor turbocharged or supercharged applications, the CCV catch can is especially beneficial, as it prevents oil contamination from collecting in the intercooler where it can reduce heat exchanger efficiency and engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBillet oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eTundra-specific laser-cut anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAdditional laser-cut anodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 8AN hose ends and adapter fittings\u003c\/li\u003e\n\u003cli\u003e1\/2-inch PCV rubber hose for custom applications\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569216053595,"sku":"USA-RAD-20-0239-FL","price":361.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0240-FL.jpg?v=1783707873"},{"product_id":"radium-engineering-catch-can-kit-ccv-toyota-tacoma-05-23-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Toyota Tacoma 05-23 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Toyota Tacoma 05-23 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2023 Toyota Tacoma (V6 Models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting holes and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0839-FL Catch Can Kit, CCV, 05-23 Tacoma, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to factory threaded bosses on the inner fender using the supplied mounting bracket.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the intake system. The CCV catch can captures these contaminants and returns clean, filtered air to the intake.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eTacoma-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569233650011,"sku":"USA-RAD-20-0839-FL","price":361.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0839-FL.jpg?v=1783708087"},{"product_id":"radium-engineering-catch-can-kit-pcv-toyota-tundra-07-21-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Toyota Tundra 07-21 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for Toyota Tundra 07-21 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2007–2021 Toyota Tundra (3UR-FE Engine)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThis kit is specifically designed for the 2007–2021 Toyota Tundra equipped with the 3UR-FE engine. Installation requires no drilling or permanent vehicle modifications.\u003c\/p\u003e\n\u003cp\u003eIf your vehicle is equipped with a TRD or other aftermarket supercharger, verify that the catch can mounting location is not occupied by intercooler piping or other supercharger components before installation.\u003c\/p\u003e\n\u003cp\u003eAn oil catch can helps protect the engine from excessive crankcase blow-by generated during normal and performance driving. By removing oil-contaminated vapors before they re-enter the intake system, it helps maintain engine performance and reduce carbon buildup.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0238-FL Catch Can Kit, PCV, Toyota Tundra, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering offers two closed-loop catch can systems for the Toyota Tundra that can be used individually or together. These systems do not vent to atmosphere (VTA), making them emissions and track legal. Clean, filtered air is returned to the engine while maintaining negative crankcase pressure for improved performance and preventing oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe 20-0238-FL PCV Catch Can Kit installs inline with the positive crankcase ventilation (PCV) valve.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, light cruising, and deceleration, metered vacuum draws crankcase gases through the catch can, preventing oil vapor, unburned fuel, and sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003cp\u003eBecause Radium catch cans are pressure sealed, they are also suitable for supercharged and turbocharged applications, allowing a direct connection to the intake manifold.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBillet oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eTundra-specific laser-cut anodized mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN and 8AN hose ends\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN and 8AN adapter fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003ePCV rubber hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569240269147,"sku":"USA-RAD-20-0238-FL","price":361.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0238-FL.jpg?v=1783708183"},{"product_id":"radium-engineering-catch-can-kit-pcv-toyota-tacoma-05-23-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Toyota Tacoma 05-23 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Chevrolet Corvette 05-13 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch can is installed inline with the PCV system to remove oil and water condensation from crankcase gases before they enter the intake manifold. The closed-loop design also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffectively raises octane and improves engine performance with cleaner inlet air\u003c\/li\u003e\n\u003cli\u003ePrevents oil buildup in the intake, intercooler system, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine damage\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0785-FL Catch Can Kit, PCV, GM LS2\/LS3\/LS7 Engine, Fluid Lock\u003c\/h4\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2007 Chevrolet Corvette (LS2)\u003c\/li\u003e\n\u003cli\u003e2006–2013 Chevrolet Corvette Z06 (LS7)\u003c\/li\u003e\n\u003cli\u003e2008–2013 Chevrolet Corvette (LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Wet Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Dry Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette 427 (LS7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with the Corvette ZR1 (LS9) because of alternator placement. Use the 20-0786-FL kit instead.\u003c\/li\u003e\n\u003cli\u003eFor LS1 and LS6 C5 Corvettes, use the 20-0260-FL kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum mounting bracket attaches to the front right-hand side of the cylinder head.\u003c\/p\u003e\n\u003cp\u003eBeginning with the 2004 Gen IV LS engines, General Motors replaced the traditional PCV valve with a 2.5 mm fixed orifice. While this reduced manufacturing costs, a conventional PCV valve provides important benefits, including maintaining negative crankcase pressure, preventing boost pressure from entering the crankcase, and protecting against crankcase ignition during a backfire.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can improves the Gen IV LS crankcase ventilation system by installing inline between the PCV system and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eDuring idle, cruising, and deceleration, metered vacuum draws crankcase gases through the catch can, preventing oil vapor, unburned fuel, and sludge from entering the intake manifold. Because the factory 2.5 mm orifice is restrictive, a replacement baffled oil cap is included to improve crankcase ventilation.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum baffled oil cap\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum PCV valve\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003cli\u003eRubber caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0786-FL Catch Can Kit, CCV, 05-13 Corvette, Fluid Lock\u003c\/h4\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2007 Chevrolet Corvette (LS2)\u003c\/li\u003e\n\u003cli\u003e2006–2013 Chevrolet Corvette Z06 (LS7)\u003c\/li\u003e\n\u003cli\u003e2008–2013 Chevrolet Corvette (LS3)\u003c\/li\u003e\n\u003cli\u003e2009–2013 Chevrolet Corvette ZR1 (LS9)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Wet Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Dry Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette 427 (LS7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum mounting bracket attaches to the right-hand hood latch.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe to retain factory functionality.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the intake pipe. The catch can captures these contaminants before they enter the intake system.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0787-FL Dual Catch Can Kit, 05-13 Corvette, Fluid Lock\u003c\/h4\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2007 Chevrolet Corvette (LS2)\u003c\/li\u003e\n\u003cli\u003e2006–2013 Chevrolet Corvette Z06 (LS7)\u003c\/li\u003e\n\u003cli\u003e2008–2013 Chevrolet Corvette (LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Wet Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Dry Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette 427 (LS7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with the Corvette ZR1 (LS9) because of alternator placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum dual catch can bracket mounts to the front right-hand side of the cylinder head.\u003c\/p\u003e\n\u003cp\u003eThis kit combines both the PCV and CCV catch can systems to provide maximum crankcase ventilation and engine protection.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569252000091,"sku":"USA-RAD-20-0838-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0838-FL.jpg?v=1783708347"},{"product_id":"radium-engineering-dual-catch-can-kit-toyota-tacoma-05-23-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Toyota Tacoma 05-23 Fluid Lock","description":"\u003ch3\u003eRadium Engineering Dual Catch Can Kit - Toyota Tacoma 05-23 Fluid Lock\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2023 Toyota Tacoma (V6 Models)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting holes and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003e20-0838-FL Catch Can Kit, PCV, 05-23 Tacoma, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can installs inline between the PCV valve and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valves close and no flow occurs through the hoses. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003cp\u003eBecause Radium catch cans are pressure sealed, no inline check valve is required, allowing a direct connection to the intake manifold.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eTacoma-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0839-FL Catch Can Kit, CCV, 05-23 Tacoma, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to factory threaded bosses on the inner fender using the supplied mounting bracket.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the intake system. The CCV catch can captures these contaminants and returns clean, filtered air to the intake.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eTacoma-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0840-FL Dual Catch Can Kit, 05-23 Tacoma, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0840-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit combines both the PCV and CCV catch can systems for complete crankcase ventilation protection.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569255309659,"sku":"USA-RAD-20-0840-FL","price":666.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0840-FL.jpg?v=1783708444"},{"product_id":"radium-engineering-catch-can-kit-toyota-chaser-mark-ii-cresta-96-01-fluid-lock","title":"Radium Engineering Catch Can Kit - Toyota Chaser \/ MARK II \/ Cresta 96-01 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for Toyota Chaser \/ Mark II \/ Cresta 96-01 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1996–2001 Toyota Chaser (All models, trims, and engines)\u003c\/li\u003e\n\u003cli\u003e1996–2001 Toyota Cresta (All models, trims, and engines)\u003c\/li\u003e\n\u003cli\u003e1996–2000 Toyota Mark II (All models, trims, and engines)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThis kit mounts using factory mounting holes and integrates seamlessly with the surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick makes it easy to inspect the collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe catch can installs inline between the PCV valve and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eIt mounts to the factory threaded bosses located behind the right-hand strut tower near the firewall.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eToyota-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569289748827,"sku":"UAS-RAD-20-0738-FL","price":318.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0738-FL.jpg?v=1783708955"},{"product_id":"radium-engineering-catch-can-kit-pcv-2022-subaru-brz-toyota-gr86-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - 2022+ Subaru BRZ \/ Toyota GR86 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for 2022+ Subaru BRZ \/ Toyota GR86 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2022+ Toyota GR86\u003c\/li\u003e\n\u003cli\u003e2022+ Subaru BRZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential to protect the engine from elevated levels of crankcase blow-by accumulated during aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLess oil consumption effectively raises octane\u003c\/li\u003e\n\u003cli\u003eCleaner air increases engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents sludge buildup in the intake\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePlatform Specifics\u003c\/h4\u003e\n\u003cp\u003eThe catch cans are strategically located for compatibility with both Right Hand Drive (RHD) and Left Hand Drive (LHD) vehicles. Minor brake line clearance is required on RHD installations.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory bosses and holes on the chassis, requiring no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003cp\u003eThe PCV and CCV catch can kits are completely independent of each other and can be purchased individually or together. They do not vent to atmosphere (VTA), making them emissions and track legal. The closed-loop design routes filtered air back into the engine to be burned while promoting negative crankcase pressure for optimal performance and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003e20-0911-FL Catch Can Kit, PCV, 2022+ BRZ\/GR86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eThe 20-0911-FL PCV kit mounts on the right-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 5\/8-inch PCV (Positive Crankcase Ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, steady-state cruising, and deceleration, the PCV hose experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003ch4\u003e20-0913-FL Dual Catch Can Kit, 2022+ BRZ\/GR86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0913-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit utilizes both the CCV and PCV catch can kits.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569313440091,"sku":"USA-RAD-20-0911-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0913-FL_1.jpg?v=1783710085"},{"product_id":"radium-engineering-catch-can-kit-ccv-scion-fr-s-subaru-brz-toyota-gt86-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Scion FR-S \/ Subaru BRZ \/ Toyota GT86 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Scion FR-S \/ Subaru BRZ \/ Toyota GT86 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2012–2021 Toyota 86\u003c\/li\u003e\n\u003cli\u003e2012–2020 Subaru BRZ\u003c\/li\u003e\n\u003cli\u003e2012–2016 Scion FR-S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLess oil consumption effectively raises octane\u003c\/li\u003e\n\u003cli\u003eCleaner air increases engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents sludge buildup in the intake\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePlatform Specifics\u003c\/h4\u003e\n\u003cp\u003eThe catch cans are strategically located for compatibility with Right Hand Drive (RHD) and Left Hand Drive (LHD) variations. Minor brake line clearancing is necessary on RHD installations. The kits use factory bosses and holes on the chassis, requiring no cutting, drilling, or permanent modifications to the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe two oil catch can kits are completely independent of each other and are sold individually or together. They do not vent to atmosphere (VTA), making them emissions and track legal. Closed-loop systems route clean filtered air back through the engine to be burned while promoting negative crankcase pressure for optimal performance. They also prevent unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003e20-0901-FL Catch Can Kit, PCV, FR-S\/BRZ\/GT86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eThe 20-0901-FL PCV kit mounts on the right-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 3\/8-inch PCV (Positive Crankcase Ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and this hose experiences no flow. During idle, steady-state cruising, and deceleration, the PCV hose experiences metered vacuum, preventing unwanted crankcase vapor, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003ch4\u003e20-0902-FL Catch Can Kit, CCV, FR-S\/BRZ\/GT86\/GR86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eThe 20-0902-FL CCV kit mounts on the left-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 1\/2-inch breather port. At low loads it experiences atmospheric pressure, while at high load (WOT) it experiences vacuum. Without a catch can, unwanted crankcase vapors, unburned fuel, and oil sludge would be drawn into the air intake. For turbocharged or supercharged engines, this catch can is essential for preventing oil accumulation in the intercooler, helping maintain heat exchanger efficiency.\u003c\/p\u003e\n\u003ch4\u003e20-0903-FL Dual Catch Can Kit, FR-S\/BRZ\/GT86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0903-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit utilizes both the CCV and PCV catch can kits.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569399685467,"sku":"USA-RAD-20-0902-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0902-FL.jpg?v=1783710599"},{"product_id":"radium-engineering-catch-can-kit-pcv-scion-fr-s-subaru-brz-toyota-gt86-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Scion FR-S \/ Subaru BRZ \/ Toyota GT86 Fluid Lock","description":"\u003cp\u003e\u003cstrong\u003eRadium Engineering Catch Can Kit PCV - Scion FR-S \/ Subaru BRZ \/ Toyota GT86 Fluid Lock\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2012–2021 Toyota 86\u003c\/li\u003e\n\u003cli\u003e2012–2020 Subaru BRZ\u003c\/li\u003e\n\u003cli\u003e2012–2016 Scion FR-S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAn oil catch can is essential to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLess oil consumption effectively raises octane\u003c\/li\u003e\n\u003cli\u003eCleaner air increases engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents sludge buildup in the intake\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePlatform Specifics\u003c\/h3\u003e\n\u003cp\u003eThe catch cans are strategically located for compatibility with Right Hand Drive (RHD) and Left Hand Drive (LHD) variations. Minor brake line clearancing is necessary on RHD installations. The kits use factory mounting points, requiring no cutting, drilling, or permanent modifications.\u003c\/p\u003e\n\u003cp\u003eThe two oil catch can kits are completely independent of each other and are sold individually or together. They do not vent to atmosphere (VTA), making them emissions and track legal. Closed-loop systems route clean filtered air back through the engine while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e20-0901-FL Catch Can Kit, PCV, FR-S\/BRZ\/GT86, Fluid Lock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20-0901-FL PCV kit mounts on the right-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 3\/8\" PCV (Positive Crankcase Ventilation) valve. During idle, cruising, and deceleration, it prevents crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e20-0902-FL Catch Can Kit, CCV, FR-S\/BRZ\/GT86\/GR86, Fluid Lock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 20-0902-FL CCV kit mounts on the left-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can runs inline with the 1\/2\" breather port. During high-load conditions (WOT), it prevents crankcase vapors, unburned fuel, and oil sludge from entering the air intake. It is highly recommended for turbocharged or supercharged engines to prevent oil accumulation in the intercooler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e20-0903-FL Dual Catch Can Kit, FR-S\/BRZ\/GT86, Fluid Lock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0903-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit combines both the CCV and PCV catch can systems for maximum protection.\u003c\/p\u003e\n\u003ch3\u003eInstructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569406435675,"sku":"USA-RAD-20-0901-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0901-FL.jpg?v=1783710690"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/yonl5p7r_6347ef0a-8463-4f8a-84f6-a0390343dc82.png?v=1794674056","url":"https:\/\/www.qtparts.fi\/en-gb\/collections\/toyota-moottorin-huohotus.oembed","provider":"QT Parts","version":"1.0","type":"link"}