{"title":"Nissan - Engine breather","description":null,"products":[{"product_id":"radium-engineering-universal-competition-catch-can-kopio","title":"Radium Engineering Dual Catch Can Kit CCV Nissan R35 GT-R Fluid Lock","description":"\u003ch3\u003eDual CCV Catch Can Kit for Nissan GT-R R35 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R R35\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0555 Dual CCV Catch Can Kit, Nissan GT-R R35\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0555 Dual CCV Catch Can Kit includes two dedicated CCV catch cans that install inline between the crankcase ventilation ports and the turbocharger intake pipes while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the CCV system experiences atmospheric pressure. Under high engine load and boost, crankcase pressure increases significantly, causing oil vapor and blow-by contaminants to flow toward the turbocharger inlets. Without proper oil separation, these contaminants can accumulate in the intake piping and intercoolers, reducing thermal efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe dual Fluid Lock® catch cans capture oil vapor, moisture, and other blow-by contaminants before they reach the turbocharger intake system, helping maintain cleaner intake components and supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eFor complete crankcase ventilation protection, this kit is designed to be used alongside the R35 GT-R PCV Catch Can Kit.\u003c\/p\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe Dual CCV Catch Can Kit does not capture blow-by from the PCV side of the crankcase.\u003c\/li\u003e\n\u003cli\u003eCompatible with and recommended for use alongside the R35 GT-R PCV Catch Can Kit (Part Number: 20-0565).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":51001795805531,"sku":"USA-RAD-20-0555-FL","price":489.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0555-FL.jpg?v=1752834286"},{"product_id":"radium-engineering-dual-catch-can-kit-nissan-r32-gt-r-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Nissan R32 GT-R Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Nissan Skyline R32 GT-R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R32 GT-R\u003c\/li\u003e\n\u003cli\u003eRB26DETT engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering Dual Catch Can Kit is designed specifically for the Nissan Skyline R32 GT-R to prevent oil vapor and blow-by contaminants from entering the engine's intake system.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can system provides dedicated PCV and CCV oil separation, helping maintain cleaner intake components and supporting long-term engine performance and reliability. Installation is a direct bolt-on using factory mounting locations with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe Dual Catch Can Kit combines dedicated PCV and CCV catch cans to provide complete crankcase ventilation protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can captures oil vapor, moisture, unburned fuel, and other blow-by contaminants during idle, cruising, and deceleration while retaining full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can manages the high crankcase flow generated during heavy engine loads and spirited driving, preventing oil contamination from reaching the intake piping, intercooler, and turbocharger system.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering's Fluid Lock® technology prevents collected oil from re-entering the intake system during hard acceleration, cornering, and track use, providing consistent protection under demanding driving conditions.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDual catch can system with dedicated PCV and CCV circuits\u003c\/li\u003e\n\u003cli\u003ePatented Fluid Lock® technology\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil vapor and contaminant buildup in the intake system\u003c\/li\u003e\n\u003cli\u003eSupports reliable engine performance during high-performance driving\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-machined aluminum components\u003c\/li\u003e\n\u003cli\u003eHigh-quality hoses and fittings\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using factory mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":52080398729563,"sku":"USA-RAD-20-0590-FL","price":739.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0590-FL.png?v=1768902151"},{"product_id":"radium-engineering-catch-can-kit-pcv-nissan-r32-gt-r-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Nissan R32 GT-R Fluid Lock","description":"\u003ch3\u003ePCV Catch Can Kit for Nissan GT-R R35 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R R35\u003c\/li\u003e\n\u003cli\u003eLeft-hand drive\u003c\/li\u003e\n\u003cli\u003eRight-hand drive (minor mounting modifications may be required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe PCV Catch Can Kit installs inline between the factory PCV valve and the intake manifold and mounts on the left-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or above atmospheric pressure, the factory PCV check valve closes and there is no flow through the PCV hose. During idle, steady-state cruising, and deceleration, manifold vacuum draws crankcase vapors, unburned fuel, and oil sludge toward the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures oil vapor, moisture, unburned fuel, and other blow-by contaminants before they enter the intake system while retaining full OEM functionality. The catch can should be emptied periodically as part of regular maintenance.\u003c\/p\u003e\n\u003cp\u003eBecause the catch can is fully pressure sealed, no inline check valve is required, allowing direct connection to the intake manifold.\u003c\/p\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot directly compatible with 2008–2011 GT-R models that do not have the factory strut brace.\u003c\/li\u003e\n\u003cli\u003eCompatible with and recommended for use alongside the Dual CCV Catch Can Kit (Part Number: 20-0566).\u003c\/li\u003e\n\u003cli\u003eOn right-hand drive vehicles, minor modifications to the catch can mounting may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":52598387671387,"sku":"USA-RAD-20-0565-FL","price":298.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0565-FL_181030a0-51a8-4343-b7fe-e5021da7562a.jpg?v=1773653391"},{"product_id":"radium-engineering-dual-catch-can-kit-nissan-r32-gt-r-fluid-lock-1","title":"Radium Engineering Dual Catch Can Kit - Nissan R32 GT-R Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Nissan R32 GT-R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline GT-R R32\u003c\/li\u003e\n\u003cli\u003eRB26DETT engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThis Radium Engineering Dual Catch Can Kit is specifically designed for the RB26DETT engine and provides complete crankcase ventilation protection by combining both the PCV and CCV catch can systems.\u003c\/p\u003e\n\u003cp\u003eThe system retains true factory PCV operation while capturing oil vapor, moisture, fuel residue, and other blow-by contaminants before they enter the intake system. The catch cans operate as fully closed-loop systems and do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kit includes replacement press-fit valve cover fittings and a large 10AN crossover hose that balances the intake and exhaust sides of the crankcase as originally intended by Nissan. Installation uses factory mounting locations with no cutting, drilling, or permanent vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eEach Fluid Lock® catch can features large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick for easy fluid inspection.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe dual catch can system combines dedicated PCV and CCV catch cans to provide maximum engine protection.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can mounts to the threaded bosses on the front right-hand strut tower and installs inline between the valve cover crankcase vents and the PCV valve on the vacuum chamber. During idle, steady-state cruising, and deceleration, it captures metered crankcase vapors, unburned fuel, and oil sludge before they enter the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can mounts to the windshield wiper motor on the left-hand side of the firewall and installs inline between the valve cover crankcase vents and the turbo inlet pipe. During high engine load (WOT), it captures oil vapor and blow-by contaminants before they reach the intake piping and intercooler, helping maintain intercooler efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eBecause the Fluid Lock® catch cans are pressure sealed, no additional inline check valve is required.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® catch can with integrated dipstick\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eRB26DETT valve cover press-fit fittings\u003c\/li\u003e\n\u003cli\u003e10AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium 5\/8-inch PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® catch can with integrated dipstick\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eRB26DETT valve cover press-fit fittings\u003c\/li\u003e\n\u003cli\u003e10AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium 5\/8-inch PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531716551003,"sku":"USA-RAD-20-0590-FL","price":711.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0590-FL.jpg?v=1783428064"},{"product_id":"radium-engineering-catch-can-kit-pcv-nissan-r35-gt-r-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Nissan R35 GT-R Fluid Lock","description":"\u003ch3\u003ePCV Catch Can Kit for Nissan R35 GT-R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R (R35)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting locations and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0565 PCV Catch Can Kit, Nissan R35 GT-R\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0565 PCV Catch Can Kit installs inline between the factory PCV valve and the intake manifold while retaining full OEM functionality. It mounts on the left-hand side of the engine compartment using factory mounting points.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and there is no flow through the system. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum that would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they enter the intake manifold, helping maintain cleaner intake components and supporting long-term engine performance.\u003c\/p\u003e\n\u003cp\u003eBecause the Fluid Lock® catch can is pressure sealed, no additional inline check valve is required, allowing direct connection to the intake manifold.\u003c\/p\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot directly compatible with 2008–2011 GT-R models that were not equipped with the factory strut bar.\u003c\/li\u003e\n\u003cli\u003eCompatible with and recommended to be used alongside the 20-0555 Dual CCV Catch Can Kit for complete crankcase ventilation protection.\u003c\/li\u003e\n\u003cli\u003eNo inline check valve is required because the Fluid Lock® catch can is pressure sealed.\u003c\/li\u003e\n\u003cli\u003eOn right-hand drive vehicles, minor modifications may be required for catch can mounting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531751809371,"sku":"USA-RAD-20-0565-FL","price":288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0565-FL_76e9c592-9330-4e24-bf43-059ecce8866d.jpg?v=1783428219"},{"product_id":"radium-engineering-dual-catch-can-kit-ccv-nissan-r35-gt-r-fluid","title":"Radium Engineering Dual Catch Can Kit CCV - Nissan R35 GT-R Fluid Lock","description":"\u003ch3\u003eDual CCV Catch Can Kit for Nissan R35 GT-R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R (R35)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting locations and integrate seamlessly with surrounding engine components. They operate as fully closed-loop systems and do not vent to atmosphere (VTA), making them emissions and track legal while promoting negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eNo cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0555 Dual CCV Catch Can Kit, Nissan R35 GT-R\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0555 Dual CCV Catch Can Kit includes two Fluid Lock® catch cans—one for each cylinder head breather. Both catch cans install inline between the factory crankcase vent (CCV) ports and their corresponding turbocharger inlet pipes while retaining full factory functionality.\u003c\/p\u003e\n\u003cp\u003eDuring light engine loads, the crankcase vents experience atmospheric pressure. Under high engine load (WOT), significant crankcase blow-by flows through these lines toward the turbo inlets. Without catch cans, oil vapor and sludge can accumulate in the intake piping and intercoolers, reducing heat exchanger efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eBy capturing these contaminants before they enter the intake system, the dual CCV system helps maintain cleaner intake components and supports long-term engine reliability.\u003c\/p\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe dual CCV catch can kit does \u003cstrong\u003enot\u003c\/strong\u003e address blow-by from the PCV side of the crankcase.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53532075589979,"sku":"USA-RAD-20-0555-FL","price":556.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0555-FL_63e01fe8-7b7f-4814-8695-815dd7225fa6.jpg?v=1783430143"},{"product_id":"radium-engineering-catch-can-kit-pcv-nissan-z33-v35-vq35de-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Nissan Z33 V35 VQ35DE Fluid Lock","description":"\u003ch3\u003ePCV Catch Can Kit for Nissan Z33 \/ V35 VQ35DE Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 350Z (Z33), excluding VQ35HR\u003c\/li\u003e\n\u003cli\u003eNissan Fairlady Z (Z33), excluding VQ35HR\u003c\/li\u003e\n\u003cli\u003eNissan Skyline (V35), excluding VQ35HR\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 (V35), excluding VQ35HR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0728-FL PCV Catch Can Kit, Nissan Z33\/V35 VQ35DE\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0728-FL PCV Catch Can Kit installs inline between the factory PCV valve and the intake manifold while retaining full factory functionality.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and there is no flow through the system. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, which would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components and improved engine performance.\u003c\/p\u003e\n\u003cp\u003eBecause the Fluid Lock® catch can is pressure sealed, no additional inline check valve is required, allowing direct connection to the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe catch can mounts to the factory power steering reservoir bracket for a clean OEM-style installation.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554208702811,"sku":"USA-RAD-20-0728-FL","price":288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0728-FL.jpg?v=1783629192"},{"product_id":"radium-engineering-catch-can-kit-pcv-nissan-s15-silva-200sx-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Nissan S15 Silva \/ 200SX Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for Nissan S15 Silvia \/ 200SX Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia (S15)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX (S15)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components. It operates as a fully closed-loop system and does not vent to atmosphere (VTA), making it emissions and track legal while maintaining negative crankcase pressure and preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eBuilt-in dipsticks allow quick inspection of collected fluid, and installation requires no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0635 Catch Can Kit, PCV, Nissan S15 Silvia\/200SX\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0635 PCV Catch Can Kit installs inline between the factory PCV valve and the intake manifold while retaining full factory functionality.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes and there is no flow through the system. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, which would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures these contaminants before they reach the intake system, helping maintain cleaner intake components and supporting long-term engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554226659675,"sku":"USA-RAD-20-0635-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0635-FL.jpg?v=1783629399"},{"product_id":"radium-engineering-catch-can-kit-ccv-nissan-s13-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Nissan S13 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Nissan S13 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan S13 240SX (all models, trims, right-hand drive and left-hand drive)\u003c\/li\u003e\n\u003cli\u003eNissan S13 Silvia (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 180SX (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 200SX (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the crankcase ventilation gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid, and no cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0726 Catch Can Kit, CCV, Nissan S13\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to two factory holes on the left-hand side of the unibody near the firewall. It is specifically designed to clear the windshield wiper motor on right-hand drive vehicles and the brake master cylinders on left-hand drive vehicles.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eDuring low engine loads, the system operates under atmospheric pressure. Under high engine loads (WOT), crankcase gases flow into the intake system, which can lead to oil and sludge accumulation in the intake piping and intercooler. This contamination reduces intercooler thermal efficiency and can decrease engine performance.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can captures these contaminants before they reach the intake system, promoting cleaner, filtered air and improved engine efficiency.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554503319899,"sku":"USA-RAD-20-0726-FL","price":325.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0726-FL.jpg?v=1783632633"},{"product_id":"radium-engineering-catch-can-kit-pcv-nissan-s13-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - Nissan S13 Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for Nissan S13 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan S13 240SX (all models, trims, right-hand drive and left-hand drive)\u003c\/li\u003e\n\u003cli\u003eNissan S13 Silvia (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 180SX (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 200SX (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kit mounts using factory mounting points and integrates seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid, and no cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0725 Catch Can Kit, PCV, Nissan S13\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can installs inline between the PCV valve and the intake manifold. It mounts to the threaded bosses on the right-hand strut tower, just forward of the fuel filter.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, which would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold after high-load driving.\u003c\/p\u003e\n\u003cp\u003eThe catch can captures these contaminants before they enter the engine, helping maintain a cleaner intake system and improved engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53568840532315,"sku":"USA-RAD-20-0725-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0725-FL.jpg?v=1783705018"},{"product_id":"radium-engineering-dual-catch-can-kit-nissan-s13-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Nissan S13 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Nissan S13 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan S13 240SX (all models, trims, right-hand drive and left-hand drive)\u003c\/li\u003e\n\u003cli\u003eNissan S13 Silvia (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 180SX (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003cli\u003eNissan S13 200SX (all models, trims, right-hand drive and left-hand drive, excluding CA18DET)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting points and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid, and no cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003e20-0725 Catch Can Kit, PCV, Nissan S13\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can installs inline between the PCV valve and the intake manifold. It mounts to the threaded bosses on the right-hand strut tower, just forward of the fuel filter.\u003c\/p\u003e\n\u003cp\u003eDuring idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, which would normally draw crankcase vapors, unburned fuel, and oil sludge into the intake manifold. The catch can captures these contaminants before they enter the engine.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0726 Catch Can Kit, CCV, Nissan S13\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to two factory holes on the left-hand side of the unibody near the firewall. It is specifically designed to clear the windshield wiper motor on right-hand drive vehicles and the brake master cylinders on left-hand drive vehicles.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe. During high engine loads (WOT), it captures oil and sludge before they enter the intake system, helping keep the intercooler clean and maintaining thermal efficiency and engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0727 Dual Catch Can Kit, Nissan S13\u003c\/h4\u003e\n\u003cp\u003eFor maximum engine protection, Radium Engineering recommends the 20-0727 Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis package combines both the PCV and CCV catch can systems to provide complete crankcase ventilation protection during both vacuum and boost conditions.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53568976159067,"sku":"USA-RAD-20-0727-FL","price":636.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0727-FL.jpg?v=1783706280"},{"product_id":"radium-engineering-dual-catch-can-kit-nissan-370z-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Nissan 370Z Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Nissan 370Z Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan 370Z (VQ37VHR Engine)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting points and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eTo maintain the factory symmetry of the VQ37VHR engine bay, the catch cans mount to both the right-hand and left-hand strut towers using factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eThe two catch cans install inline with the factory twin PCV valves integrated into the valve covers, preserving full OEM functionality.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valves close and no flow occurs through the hoses. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003cp\u003eBecause Radium catch cans are pressure sealed, no inline check valve is required, allowing a direct connection to the intake manifold.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo anodized oil catch cans with integrated condensers and dipsticks\u003c\/li\u003e\n\u003cli\u003eNissan-specific anodized aluminum mounting brackets\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel power steering reservoir and relay box relocation brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569014923611,"sku":"USA-RAD-20-0525-FL","price":638.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0525-FL.jpg?v=1783706783"},{"product_id":"radium-engineering-triple-catch-can-kit-nissan-r35-gt-r-fluid-lock","title":"Radium Engineering Triple Catch Can Kit - Nissan R35 GT-R Fluid Lock","description":"\u003ch3\u003eTriple Catch Can Kit for Nissan R35 GT-R Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan GT-R R35\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering offers two catch can systems for the Nissan R35 GT-R that can be purchased individually or together for maximum engine protection.\u003c\/p\u003e\n\u003cp\u003eThe 20-0565-FL PCV Catch Can Kit mounts near the brake master cylinder at the rear of the engine bay and installs inline between the PCV valve and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe 20-0555-FL Crankcase Vent Catch Can Kit mounts at the front of the engine and connects to the valve cover breather lines leading to the turbo inlet pipes. This kit uses two catch cans to protect the crankcase ventilation system.\u003c\/p\u003e\n\u003cp\u003eUsing both systems together provides the most effective protection against oil contamination throughout the entire crankcase ventilation system.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0566-FL Triple Catch Can Kit, Nissan R35 GT-R, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0566-FL Triple Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eDuring idle, light cruising, and other vacuum conditions, the PCV catch can prevents oil vapor from entering the intake manifold.\u003c\/p\u003e\n\u003cp\u003eUnder boost, the factory PCV valve closes and crankcase blow-by is redirected through the cylinder head breather lines. The dual crankcase vent catch cans capture oil and contaminants before they reach the turbo inlet pipes.\u003c\/p\u003e\n\u003cp\u003eTogether, the three catch cans provide complete protection for both the PCV and crankcase ventilation systems.\u003c\/p\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe 20-0565-FL PCV Catch Can Kit is not directly compatible with 2008–2011 Nissan GT-R models that were not equipped with the factory strut bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThree anodized oil catch cans with integrated condensers and dipsticks\u003c\/li\u003e\n\u003cli\u003eR35 GT-R-specific anodized aluminum mounting brackets\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum AN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium Engineering PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569029800283,"sku":"USA-RAD-20-0566-FL","price":840.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0566-FL.jpg?v=1783706923"},{"product_id":"radium-engineering-catch-can-kit-ccv-nissan-s15-silva-200sx-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Nissan S15 Silva \/ 200SX Fluid Lock","description":"\u003ch3\u003eCatch Can Kit CCV for Nissan S15 Silvia \/ 200SX Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia (S15)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX (S15)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting points and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0636 Catch Can Kit, CCV, Nissan S15 Silvia \/ 200SX\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts to two of the factory wiper motor mounting points.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the intake system. This oil contamination can spread into the intercooler, reducing its thermal efficiency and negatively affecting engine performance.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can captures these contaminants before they reach the intake system and returns clean, filtered air to the engine.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569226277211,"sku":"USA-RAD-20-0636-FL","price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0636-FL.jpg?v=1783707993"},{"product_id":"radium-engineering-dual-catch-can-kit-nissan-z33-v35-vq35de-hr-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Nissan Z33 V35 VQ35DE\/HR Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Nissan Z33 V35 VQ35DE\/HR Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0729-FL Dual Catch Can Kit, Nissan V35, VQ35DE\/HR\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline (V35), excluding VQ35HR\u003c\/li\u003e\n\u003cli\u003eInfiniti G35 (V35), excluding VQ35HR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory mounting holes and integrate seamlessly with surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipsticks allow for quick and easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe dual catch can kit includes both a PCV and a CCV catch can. The dual mounting bracket installs on the front left-hand side of the engine bay and is not compatible with the factory air box.\u003c\/p\u003e\n\u003ch4\u003ePCV Catch Can\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can installs inline between the PCV valve and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valves close and no flow occurs through the hoses. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003cp\u003eBecause Radium catch cans are pressure sealed, no inline check valve is required, allowing a direct connection to the intake manifold.\u003c\/p\u003e\n\u003ch4\u003eCCV Catch Can\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the intake system, causing buildup in the air intake pipe. The CCV catch can captures these contaminants and returns clean, filtered air to the intake.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo baffled oil catch cans\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569283064155,"sku":"USA-RAD-20-0729-FL","price":541.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0729-FL.jpg?v=1783708803"},{"product_id":"radium-engineering-dual-catch-can-kit-nissan-s15-silva-200sx-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Nissan S15 Silva \/ 200SX Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Nissan S15 Silvia \/ 200SX Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Silvia (S15)\u003c\/li\u003e\n\u003cli\u003eNissan 200SX (S15)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003cp\u003eThese kits mount using factory mounting holes and integrate seamlessly with the surrounding engine components.\u003c\/p\u003e\n\u003cp\u003eThe closed-loop system does not vent to atmosphere (VTA), making it emissions and track legal. It removes oil and sludge from the PCV gases before they are routed back into the engine for combustion. The system also promotes negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe integrated dipstick allows for easy inspection of collected fluid. No cutting, drilling, or permanent vehicle modifications are required.\u003c\/p\u003e\n\u003ch4\u003e20-0635 Catch Can Kit, PCV, Nissan S15 Silvia \/ 200SX\u003c\/h4\u003e\n\u003cp\u003eThe PCV catch can kit installs inline between the PCV valve and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eWhen intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0636 Catch Can Kit, CCV, Nissan S15 Silvia \/ 200SX\u003c\/h4\u003e\n\u003cp\u003eThe CCV catch can mounts using two of the wiper motor mounting points.\u003c\/p\u003e\n\u003cp\u003eTo retain factory functionality, the CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During high-load operation (WOT), high crankcase flow would normally carry oil and sludge into the intake system, where it can accumulate in the air intake pipe and intercooler, reducing heat exchanger efficiency and engine performance.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can captures these contaminants and returns clean, filtered air to the intake system.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can\u003c\/li\u003e\n\u003cli\u003eNissan-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eAN adapter fittings and hose ends\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eRadium PCV hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-0637 Dual Catch Can Kit, Nissan S15 Silvia \/ 200SX\u003c\/h4\u003e\n\u003cp\u003eFor the ultimate in engine protection, Radium Engineering recommends the 20-0637 Dual Catch Can Kit, which combines both the PCV and CCV catch can systems.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569285521755,"sku":"USA-RAD-20-0637-FL","price":610.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0637-FL.jpg?v=1783708880"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/nissan-logo-black-registered_24136135-cdc5-4bc5-bd40-258742a5c8a2.png?v=1794674050","url":"https:\/\/www.qtparts.fi\/en\/collections\/nissan-moottorin-huohotus.oembed","provider":"QT Parts","version":"1.0","type":"link"}