{"product_id":"canchecked-mfd15-gen2-universal-data-display","title":"CANchecked MFD15 Gen2 - Universal Data Display","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eWith the CANchecked MFD15 Gen2 universal gauge, you can see all the most important engine and vehicle values on one screen.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe MFD15 Gen2 is equipped with an OLED display, offering excellent readability even in direct sunlight. Its 52mm outer diameter fits into CANchecked's vehicle-specific mounts and most gauge bezels on the market. The device is operated via two buttons on the front panel or with an optionally available rotary encoder.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e 52mm diameter and a depth of only 12.5mm.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFront Panel LED Indicator:\u003c\/strong\u003e functions as a shift light and\/or warning light.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCAN Bus Support:\u003c\/strong\u003e supports engine control units using CAN bus, custom CAN data streams, as well as OBD2 and extended VAG vehicle data from 2008 onwards.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWiFi Connectivity:\u003c\/strong\u003e connect to a smartphone or computer and configure settings with the web application.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eAdditional Inputs:\u003c\/strong\u003e connect up to six analog sensors or, alternatively, an ethanol sensor* directly to the display.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePre-set Alarms:\u003c\/strong\u003e easily activate and modify pre-set alarms, for example, a warning if exhaust gas temperature exceeds 900 °C.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCustomizability:\u003c\/strong\u003e add your own startup logo and color scheme.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOnline Data Logging (Live Logging)*:\u003c\/strong\u003e record sensor data to a phone or computer for later analysis.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cem\u003eFlex Fuel Support:\u003c\/em\u003e* display ethanol content and fuel temperature.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cem\u003eCAN Switching:\u003c\/em\u003e* control CAN switches with the display's buttons and forward analog input data to the CAN bus.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eDisplay Modes\u003c\/h2\u003e\n\u003cp\u003eYou can create up to eight different display pages and choose suitable views for them:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eAnalog Gauge Display\u003c\/li\u003e\n\n\u003cli\u003eTwo Values\u003c\/li\u003e\n\n\u003cli\u003eGear Display\u003c\/li\u003e\n\n\u003cli\u003eFour Values View\u003c\/li\u003e\n\n\u003cli\u003eSix Values View\u003c\/li\u003e\n\n\u003cli\u003eBar + Two Values\u003c\/li\u003e\n\n\u003cli\u003eCircular Gauge View\u003c\/li\u003e\n\n\u003cli\u003eDual Bar Display\u003c\/li\u003e\n\n\u003cli\u003ePerformance Meter\u003c\/li\u003e\n\n\u003cli\u003eVertical Bar Display (1–6 values)\u003c\/li\u003e\n\n\u003cli\u003eSingle Value\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eConfiguring Settings with oDSS Software\u003c\/h2\u003e\n\u003cp\u003eA new feature of the MFD15 Gen2 is its WiFi connectivity, allowing the device to be configured directly via smartphone or computer.\u003c\/p\u003e\n\u003cp\u003eWith oDSS software, you can:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003econfigure all device settings\u003c\/li\u003e\n\n\u003cli\u003erecord measurement data (Live Logging license required)\u003c\/li\u003e\n\n\u003cli\u003eupload your own startup image\u003c\/li\u003e\n\n\u003cli\u003eupdate the device software\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eSupported Values\u003c\/h2\u003e\n\u003cp\u003eOne of the most common questions is: \u003cstrong\u003e\"What values can I read from the engine control unit?\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe answer is: \u003cstrong\u003eall values that the ECU sends via the CAN bus.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MFD15 Gen2 supports the standards \u003cstrong\u003eISO 11898-2\u003c\/strong\u003e and \u003cstrong\u003eSAE J2284\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe engine control unit manufacturer determines what data is sent on the CAN bus. Documentation or a DBC file facilitates setup, and CANchecked also offers a wide range of pre-configured ECU profiles. Depending on the manufacturer, up to \u003cstrong\u003e64 different sensor values\u003c\/strong\u003e can be read.\u003c\/p\u003e\n\u003cp\u003eThe device also supports OBD2 queries via CAN bus (11-bit and 29-bit) and vehicle-specific protocols such as \u003cstrong\u003eUDS\u003c\/strong\u003e and \u003cstrong\u003eTP2\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003ePre-supported Systems\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOBD2 (11-bit and 29-bit)\u003c\/li\u003e\n\n\u003cli\u003eEcumaster Classic\u003c\/li\u003e\n\n\u003cli\u003eEcumaster Black\u003c\/li\u003e\n\n\u003cli\u003eVAG PQ34\u003c\/li\u003e\n\n\u003cli\u003eHaltech v2\u003c\/li\u003e\n\n\u003cli\u003eLinkECU\u003c\/li\u003e\n\n\u003cli\u003eMaxxECU\u003c\/li\u003e\n\n\u003cli\u003eMotec M1\u003c\/li\u003e\n\n\u003cli\u003eEmtron\u003c\/li\u003e\n\n\u003cli\u003eMegasquirt 2\u003c\/li\u003e\n\n\u003cli\u003eMegasquirt 3\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIf your desired ECU is not listed, a suitable TRI\/TRX file can be downloaded or requested from CANchecked's database.\u003c\/p\u003e\n\u003ch3\u003eIn-depth VAG Data Support\u003c\/h3\u003e\n\u003cp\u003eIn VAG vehicles manufactured from 2008 onwards (and in some cases older ones), significantly more data can be read than with a standard OBD2 connection, for example:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eoil temperature\u003c\/li\u003e\n\n\u003cli\u003eboost pressure\u003c\/li\u003e\n\n\u003cli\u003etransmission temperature\u003c\/li\u003e\n\n\u003cli\u003ecylinder-specific ignition timing correction\u003c\/li\u003e\n\n\u003cli\u003ehigh- and low-pressure fuel system values\u003c\/li\u003e\n\n\u003cli\u003ewastegate control\u003c\/li\u003e\n\n\u003cli\u003eas well as numerous other data.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eIntegrated LED\u003c\/h2\u003e\n\u003cp\u003eThe internal LED can be configured as either a shift light or a warning light.\u003c\/p\u003e\n\u003ch3\u003eShift Light\u003c\/h3\u003e\n\u003cp\u003eYou can define:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eup to 8 different colors\u003c\/li\u003e\n\n\u003cli\u003eRPM limits\u003c\/li\u003e\n\n\u003cli\u003ethe RPM at which the LED starts to flash.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWarning Light\u003c\/h3\u003e\n\u003cp\u003eMinimum and maximum values can be defined for each sensor.\u003c\/p\u003e\n\u003cp\u003eWhen a value falls below or exceeds the set limit, the LED flashes in the selected color. During warning mode, the shift light is disabled.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMFD15 Gen2 display\u003c\/li\u003e\n\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\n\u003cli\u003eConnector B (6-pin Molex)\u003c\/li\u003e\n\n\u003cli\u003eConnector C (12-pin Molex)\u003c\/li\u003e\n\n\u003cli\u003ePre-installed color-coded wires (20 cm):\n\u003cul\u003e\n\n\u003cli\u003eoperating voltage\u003c\/li\u003e\n\n\u003cli\u003eCAN bus\u003c\/li\u003e\n\n\u003cli\u003eanalog inputs\u003c\/li\u003e\n\n\u003cli\u003e5 V\u003c\/li\u003e\n\n\u003cli\u003esensor ground\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003eCrimp connectors\u003c\/li\u003e\n\n\u003cli\u003eTwo 1 kΩ resistors for NTC sensors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eAnalog Inputs\u003c\/h2\u003e\n\u003cp\u003eAlmost any sensor can be connected to the six analog inputs.\u003c\/p\u003e\n\u003cp\u003eSupported types include:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003elinear 0–5 V sensors\u003c\/li\u003e\n\n\u003cli\u003eNTC temperature sensors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eCalibrations for CANchecked's own sensors are pre-saved:\u003c\/p\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\n\u003cthead\u003e\n\n\u003ctr\u003e\n\n\u003cth class=\"last:pe-10\"\u003eInput\u003c\/th\u003e\n\n\u003cth class=\"last:pe-10\"\u003eDefault Sensor\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAIN1\u003c\/td\u003e\n\n\u003ctd\u003eNTC01 Temperature Sensor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAIN2\u003c\/td\u003e\n\n\u003ctd\u003eTCC01 K-type Exhaust Gas Temperature Sensor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAIN3\u003c\/td\u003e\n\n\u003ctd\u003eFLP01 Pressure Sensor 0–10 bar\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAIN4\u003c\/td\u003e\n\n\u003ctd\u003eBST10 Boost Pressure Sensor 0–5.5 bar absolute\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAIN5\u003c\/td\u003e\n\n\u003ctd\u003eNot Defined\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAIN6\u003c\/td\u003e\n\n\u003ctd\u003eNot Defined\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cp\u003eA ready-made \u003cstrong\u003e4-pin AIN cable\u003c\/strong\u003e can be used for connection.\u003c\/p\u003e\n\u003cp\u003eAn ethanol sensor can be connected directly to the display if the required license* is used.\u003c\/p\u003e\n\u003ch2\u003eAccessories\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22501 ETK01\u003c\/strong\u003e – external rotary encoder, with 50 cm Plug \u0026amp; Play cable\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22100 CBD08\u003c\/strong\u003e – 8-port CAN distribution hub\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22780 ANC04\u003c\/strong\u003e – 4-channel AIN cable\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22902 NTC01\u003c\/strong\u003e – fluid temperature sensor 1\/8\" NPT\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22903 TCC01\u003c\/strong\u003e – K-type temperature sensor 0–1250 °C\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22901 FLP01\u003c\/strong\u003e – pressure sensor 0–10 bar (145 psi), M10x1\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCC22900 BST10\u003c\/strong\u003e – pressure sensor 6.5 bar relative (95 psi)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eLicenses\u003c\/h2\u003e\n\u003ch3\u003eLive Logging\u003c\/h3\u003e\n\u003cp\u003eWith the Live Logging license, the display records all sensor data to the oDSS software.\u003c\/p\u003e\n\u003cp\u003eThe recorded log can be transferred to a computer or phone for analysis.\u003c\/p\u003e\n\u003cp\u003eNote: With OBD and UDS connections, only the values visible on the display are recorded.\u003c\/p\u003e\n\u003ch3\u003eFlex Fuel\u003c\/h3\u003e\n\u003cp\u003eWith the ethanol sensor license, the sensor can be connected directly to the display.\u003c\/p\u003e\n\u003cp\u003eConnection requires a 10 kΩ pull-up resistor between 5 V and the signal.\u003c\/p\u003e\n\u003cp\u003eThe display can show:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eethanol content\u003c\/li\u003e\n\n\u003cli\u003efuel temperature\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe data can also be recorded in the log.\u003c\/p\u003e\n\u003ch3\u003eCAN Switching and AIN Forwarding\u003c\/h3\u003e\n\u003cp\u003eWith this license, you can:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003econtrol CAN switches with the display's buttons or rotary encoder\u003c\/li\u003e\n\n\u003cli\u003eforward analog input voltage signals directly to the CAN bus.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":53775711732059,"sku":"CC01002","price":329.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/CC01002_01.png?v=1786624977","url":"https:\/\/www.qtparts.fi\/en\/products\/canchecked-mfd15-gen2-universal-data-display","provider":"QT Parts","version":"1.0","type":"link"}