{"title":"Chevrolet - Moottorin huohotus","description":null,"products":[{"product_id":"radium-engineering-gm-truck-fluid-lock-catch-can-kit","title":"Radium Engineering Catch Can Kit - GM Truck Fluid Lock","description":"\u003ch3\u003eCatch Can Kit for GM Truck Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2000–2006 GMC Yukon\u003c\/li\u003e\n\u003cli\u003e1999–2006 GMC Sierra 1500\u003c\/li\u003e\n\u003cli\u003e1999–2006 Chevrolet Silverado 1500\u003c\/li\u003e\n\u003cli\u003e2002–2006 Chevrolet Avalanche\u003c\/li\u003e\n\u003cli\u003e1999–2006 Chevrolet Silverado 2500HD\/3500HD\u003c\/li\u003e\n\u003cli\u003e2007 Chevrolet Silverado 1500 Classic\u003c\/li\u003e\n\u003cli\u003e2007 Chevrolet Silverado 2500HD\/3500HD Classic\u003c\/li\u003e\n\u003cli\u003e2000–2006 Chevrolet Tahoe\u003c\/li\u003e\n\u003cli\u003e2000–2006 Chevrolet Suburban\u003c\/li\u003e\n\u003cli\u003e2002–2006 Cadillac Escalade\u003c\/li\u003e\n\u003cli\u003eV8 gasoline engines up to 6.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering Fluid Lock® Catch Can Kit is specifically designed for GMT800 GM trucks and SUVs equipped with Vortec V8 gasoline engines. The kit includes everything required for a complete bolt-on installation using factory mounting points, with no drilling or permanent vehicle modifications required.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the factory PCV system to remove oil vapor and water condensation before they enter the intake manifold. Its fully closed-loop design also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe vehicle-specific mounting bracket secures the catch can to the firewall near the brake booster. Before ordering, verify that your vehicle has the required factory mounting studs on the firewall.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves effective fuel octane with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake system, throttle body, intake manifold, and intercooler (where applicable)\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe Fluid Lock® catch can captures oil vapor, moisture, and other blow-by contaminants from the PCV system before they reach the intake manifold, helping maintain cleaner intake components and supporting long-term engine performance and reliability.\u003c\/p\u003e\n\u003cp\u003eThe billet aluminum catch can features an integrated condenser and dipstick for efficient oil separation and easy maintenance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRadium billet Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eGM-specific mounting bracket\u003c\/li\u003e\n\u003cli\u003eBlack anodized aluminum 6AN hose ends\u003c\/li\u003e\n\u003cli\u003eAnodized 6AN adapter fittings\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53531205239131,"sku":"USA-RAD-20-0233-FL","price":288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0233-FL.jpg?v=1783423592"},{"product_id":"radium-engineering-dual-catch-can-kit-chevrolet-corvette-05-13-fluid-lock","title":"Radium Engineering Dual Catch Can Kit - Chevrolet Corvette 05-13 Fluid Lock","description":"\u003ch3\u003eDual Catch Can Kit for Chevrolet Corvette 2005–2013 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2007 Chevrolet Corvette (LS2)\u003c\/li\u003e\n\u003cli\u003e2006–2013 Chevrolet Corvette Z06 (LS7)\u003c\/li\u003e\n\u003cli\u003e2008–2013 Chevrolet Corvette (LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Wet Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Dry Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette 427 (LS7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering Fluid Lock® catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. The kit includes everything required for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe dual catch can system combines independent PCV and CCV catch cans to provide complete crankcase ventilation protection. Both systems operate as a fully closed-loop design, removing oil and water condensation from crankcase gases before they enter the intake system while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0787-FL Dual Catch Can Kit, 2005–2013 Corvette, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe 20-0787-FL Dual Catch Can Kit combines both the PCV and CCV catch can systems to provide the highest level of protection for Gen IV LS-powered Corvettes.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can mounts to the front right-hand side of the cylinder head and installs inline between the PCV system and the intake manifold. It captures oil vapor, fuel residue, and sludge before they enter the intake manifold. Because Gen IV LS engines use a fixed 2.5 mm PCV orifice rather than a conventional PCV valve, the kit includes a replacement baffled oil cap to improve crankcase ventilation efficiency.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can captures oil vapor and blow-by gases from the crankcase vent system before they enter the intake pipe. During wide-open throttle (WOT), this helps prevent oil contamination of the intake system and maintains cleaner intake components.\u003c\/p\u003e\n\u003cp\u003eTogether, both catch cans provide complete crankcase ventilation protection while helping maintain engine performance and reliability.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003ch4\u003ePCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum baffled oil cap\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum PCV valve\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003cli\u003eRubber caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCCV Kit\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled Fluid Lock® oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with the Corvette ZR1 (LS9) due to alternator placement.\u003c\/li\u003e\n\u003cli\u003eFor Corvette ZR1 (LS9), use Radium Engineering 20-0786-FL CCV Catch Can Kit.\u003c\/li\u003e\n\u003cli\u003eFor LS1 and LS6 C5 Corvette models, use Radium Engineering 20-0260-FL.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53554281316699,"sku":"USA-RAD-20-0787-FL","price":579.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0787.jpg?v=1783629868"},{"product_id":"radium-engineering-catch-can-kit-pcv-gm-ls1-ls6-engine-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - GM LS1 \/ LS6 Engine Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for GM LS1 \/ LS6 Engine Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGM LS1 Gen III Engine\u003c\/li\u003e\n\u003cli\u003eGM LS6 Gen III Engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch can installs inline with the PCV system to remove oil and water condensation from crankcase gases before they enter the intake manifold. The closed-loop design also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0260-FL Catch Can Kit, PCV, GM LS1\/LS6 Engine, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum mounting bracket installs on the front right-hand side of the cylinder head.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for GM LS1 and LS6 Gen III engines.\u003c\/p\u003e\n\u003cp\u003eBefore ordering, verify that your engine has sufficient clearance around the catch can mounting location. Some engine configurations equipped with additional belt-driven accessories, such as aftermarket superchargers, may not provide adequate installation space.\u003c\/p\u003e\n\u003cp\u003eFor Gen IV LS2, LS3, and LS7 engines, use the 20-0785-FL Catch Can Kit instead.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN hose ends\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum 6AN adapter fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569091043675,"sku":"USA-RAD-20-0260-FL","price":288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0260-FL.jpg?v=1783707123"},{"product_id":"radium-engineering-catch-can-kit-chevrolet-corvette-c7-z06-2015-2019","title":"Radium Engineering Catch Can Kit - Chevrolet Corvette C7 Z06 2015-2019","description":"\u003ch3\u003eCatch Can Kit Radium Engineering for Chevrolet Corvette C7 Z06 2015-2019\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2015–2019 Chevrolet Corvette Z06\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything required for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch cans remove oil and water condensation from crankcase gases before they are routed into the intake system. The closed-loop design prevents unwanted oil vapors from entering the cabin while helping maintain engine performance.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImproves engine performance with cleaner intake air\u003c\/li\u003e\n\u003cli\u003eHelps prevent oil buildup in the intake, intercooler, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine wear\u003c\/li\u003e\n\u003cli\u003eReduces hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-1186-FL Dual Catch Can Kit, 15-19 Corvette Z06, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThis dual catch can kit includes two catch cans—one for the PCV system and one for the CCV (crankcase ventilation) system—for complete crankcase protection.\u003c\/p\u003e\n\u003cp\u003eThe anodized aluminum mounting bracket installs near the front left-hand side of the engine. A polished billet aluminum ground plate attaches to three factory grounding points. Because the plate is aluminum, it maintains the factory electrical grounding while supporting the dual catch can bracket. Aluminum spacers provide the necessary clearance for the supercharger pulley.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can mounts at the front of the bracket and installs inline with the dry sump crankcase vent line leading to the intake. During wide-open throttle (WOT), it captures oil and sludge that would otherwise accumulate in the air intake pipe.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can mounts at the rear of the bracket. Since the factory PCV valve is integrated into the crankcase valley beneath the supercharger, it cannot be reused. This kit replaces it with a billet aluminum PCV valve bypass.\u003c\/p\u003e\n\u003cp\u003eA PCV hose routes from the bypass to the catch can, while the outlet uses a Radium Engineering PCV valve to return clean, filtered air to the intake manifold.\u003c\/p\u003e\n\u003cp\u003eDuring idle, steady-state cruising, and deceleration, metered vacuum draws crankcase gases through the catch can, preventing oil vapor, unburned fuel, and sludge from entering the engine after high-load operation.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo baffled oil catch cans with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum PCV valve bypass with SAE quick-connect fitting\u003c\/li\u003e\n\u003cli\u003eBillet aluminum ground plate and spacers\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum dual catch can mounting bracket\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569204879707,"sku":"USA-RAD-20-1186-FL","price":704.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/USA-RAD-20-1186-FL.png?v=1783707751"},{"product_id":"radium-engineering-catch-can-kit-pcv-gm-ls2-ls3-ls7-engine-fluid-lock","title":"Radium Engineering Catch Can Kit PCV - GM LS2 \/ LS3 \/ LS7 \/ Engine Fluid Lock","description":"\u003ch3\u003eCatch Can Kit PCV for GM LS2 \/ LS3 \/ LS7 Engine Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch can is installed inline with the PCV system to remove oil and water condensation from crankcase gases before they enter the intake manifold. The closed-loop design also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffectively raises octane and improves engine performance with cleaner inlet air\u003c\/li\u003e\n\u003cli\u003ePrevents oil buildup in the intake, intercooler system, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine damage\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0785-FL Catch Can Kit, PCV, GM LS2\/LS3\/LS7 Engine, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2007 Chevrolet Corvette (LS2)\u003c\/li\u003e\n\u003cli\u003e2006–2013 Chevrolet Corvette Z06 (LS7)\u003c\/li\u003e\n\u003cli\u003e2008–2013 Chevrolet Corvette (LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Wet Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Dry Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette 427 (LS7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with the Corvette ZR1 (LS9) because of alternator placement. Use the 20-0786-FL kit for ZR1 applications.\u003c\/li\u003e\n\u003cli\u003eFor LS1 and LS6 C5 Corvettes, use the 20-0260-FL Catch Can Kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum mounting bracket attaches to the front right-hand side of the cylinder head.\u003c\/p\u003e\n\u003cp\u003eBeginning with the 2004 Gen IV LS engines, General Motors replaced the traditional PCV valve with a 2.5 mm fixed orifice. While this reduced manufacturing costs, a conventional PCV valve helps maintain negative crankcase pressure, prevents boost pressure from entering the crankcase, and protects against crankcase ignition during a backfire.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can improves the Gen IV LS crankcase ventilation system by installing inline between the PCV system and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eDuring idle, steady-state cruising, and deceleration, metered vacuum draws crankcase gases through the catch can, preventing oil vapor, unburned fuel, and sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003cp\u003eBecause the factory 2.5 mm orifice is restrictive, a replacement baffled oil cap is included to improve crankcase ventilation and capture more blow-by.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum baffled oil cap\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum PCV valve\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003cli\u003eRubber caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569244889435,"sku":"USA-RAD-20-0785-FL","price":368.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0785.jpg?v=1783708272"},{"product_id":"radium-engineering-catch-can-kit-ccv-chevrolet-corvette-05-13-fluid-lock","title":"Radium Engineering Catch Can Kit CCV - Chevrolet Corvette 05-13 Fluid Lock","description":"\u003ch3\u003eRadium Engineering Catch Can Kit CCV - Chevrolet Corvette 05-13 Fluid Lock\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch can is installed inline with the crankcase ventilation (CCV) system to remove oil and water condensation from crankcase gases before they enter the intake system. The closed-loop design also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffectively raises octane and improves engine performance with cleaner inlet air\u003c\/li\u003e\n\u003cli\u003ePrevents oil buildup in the intake, intercooler system, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can indicate engine damage\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0786-FL Catch Can Kit, CCV, 05-13 Corvette, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2007 Chevrolet Corvette (LS2)\u003c\/li\u003e\n\u003cli\u003e2006–2013 Chevrolet Corvette Z06 (LS7)\u003c\/li\u003e\n\u003cli\u003e2008–2013 Chevrolet Corvette (LS3)\u003c\/li\u003e\n\u003cli\u003e2009–2013 Chevrolet Corvette ZR1 (LS9)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Wet Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2010–2013 Chevrolet Corvette Grand Sport (Dry Sump LS3)\u003c\/li\u003e\n\u003cli\u003e2013 Chevrolet Corvette 427 (LS7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum mounting bracket attaches to the right-hand hood latch.\u003c\/p\u003e\n\u003cp\u003eThe CCV catch can installs inline between the crankcase ventilation (CCV) port and the intake pipe while retaining full factory functionality.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, the system experiences atmospheric pressure. During wide-open throttle (WOT), high crankcase flow would normally carry oil and sludge into the air intake pipe. The catch can captures these contaminants before they enter the intake system, helping keep the intake tract cleaner and maintaining engine performance.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569266843995,"sku":"USA-RAD-20-0786-FL","price":325.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/20-0786-FL.jpg?v=1783708543"},{"product_id":"radium-engineering-catch-can-kit-pcv-fluid-lock-chevrolet-corvette-lt1-2014-2019","title":"Radium Engineering Catch Can Kit PCV Fluid Lock- Chevrolet Corvette LT1 2014-2019","description":"\u003ch3\u003eCatch Can Kit PCV for 2022+ Subaru BRZ \/ Toyota GR86 Fluid Lock Radium Engineering\u003c\/h3\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2022+ Toyota GR86\u003c\/li\u003e\n\u003cli\u003e2022+ Subaru BRZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eAn oil catch can is essential for protecting the engine from elevated levels of crankcase blow-by caused by aggressive driving. Excess oil-saturated air returning to the intake system can reduce engine performance.\u003c\/p\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLess oil consumption effectively raises octane\u003c\/li\u003e\n\u003cli\u003eCleaner air increases engine performance\u003c\/li\u003e\n\u003cli\u003ePrevents sludge buildup in the intake\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003cli\u003eHeight (without fittings): 5 inches\u003c\/li\u003e\n\u003cli\u003eOutside Diameter: 2.45 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePlatform Specifics\u003c\/h4\u003e\n\u003cp\u003eThe catch cans are strategically positioned for compatibility with both Right Hand Drive (RHD) and Left Hand Drive (LHD) vehicles. Minor brake line clearance adjustments are required for RHD installations.\u003c\/p\u003e\n\u003cp\u003eThe kits mount using factory bosses and mounting holes, requiring no cutting, drilling, or permanent vehicle modifications.\u003c\/p\u003e\n\u003cp\u003eThe PCV and CCV catch can kits operate independently and can be purchased separately or together. They do not vent to atmosphere (VTA), making them emissions and track legal. The closed-loop design routes filtered air back into the engine, helping maintain negative crankcase pressure for improved performance while preventing unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003e20-0911-FL Catch Can Kit, PCV, 2022+ BRZ\/GR86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eThe 20-0911-FL PCV kit mounts on the right-hand side of the engine bay.\u003c\/p\u003e\n\u003cp\u003eThis catch can installs inline with the 5\/8-inch PCV (Positive Crankcase Ventilation) valve. When intake manifold pressure is close to or above atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, steady-speed cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003ch4\u003e20-0913-FL Dual Catch Can Kit, 2022+ BRZ\/GR86, Fluid Lock\u003c\/h4\u003e\n\u003cp\u003eFor maximum engine protection, Radium Engineering recommends the 20-0913-FL Dual Catch Can Kit.\u003c\/p\u003e\n\u003cp\u003eThis kit combines both the CCV and PCV catch can systems for complete crankcase ventilation protection.\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569331102043,"sku":null,"price":310.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/USA-RAD-20-0985-FL.jpg?v=1783710039"},{"product_id":"radium-engineering-catch-can-kit-pcv-fluid-lock-chevrolet-corvette-lt1-2014-2020","title":"Radium Engineering Catch Can Kit PCV Fluid Lock- Chevrolet Corvette LT1 2014-2019","description":"\u003ch3\u003eCatch Can Kit PCV Fluid Lock Radium Engineering for Chevrolet Corvette LT1 2014-2019\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch can removes oil and water condensation from crankcase gases before they enter the intake manifold. The closed-loop system also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffectively raises octane and improves engine performance with cleaner inlet air\u003c\/li\u003e\n\u003cli\u003ePrevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can be an indicator of engine damage\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0985-FL Catch Can Kit, PCV, 14-19 Corvette LT1, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2014–2019 Chevrolet Corvette LT1 (Wet Sump)\u003c\/li\u003e\n\u003cli\u003e2014–2019 Chevrolet Corvette LT1 (Dry Sump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThe anodized aluminum catch can bracket mounts on the left-hand side of the radiator using factory threaded mounting holes.\u003c\/p\u003e\n\u003cp\u003eThe PCV catch can kit is compatible with both wet sump and dry sump LT1 engines.\u003c\/p\u003e\n\u003cp\u003eThis kit improves the performance of the Gen V LT1 crankcase ventilation system by installing inline between the PCV valve and the intake manifold.\u003c\/p\u003e\n\u003cp\u003eWhen the intake manifold pressure is close to or greater than atmospheric pressure, the PCV check valve closes and no flow occurs through the hose. During idle, steady-state cruising, and deceleration, the PCV system experiences metered vacuum, preventing unwanted crankcase vapors, unburned fuel, and oil sludge from entering the intake manifold after high-load driving.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch can with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting bracket\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569380352347,"sku":"USA-RAD-20-0985-FL","price":283.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/USA-RAD-20-0985-FL_1.jpg?v=1783710257"},{"product_id":"radium-engineering-triple-catch-can-kit-fluid-lock-chevrolet-corvette-lt1-2014-2019","title":"Radium Engineering Triple Catch Can Kit Fluid Lock - Chevrolet Corvette LT1 2014-2019","description":"\u003ch3\u003eTriple Catch Can Kit Fluid Lock Radium Engineering for Chevrolet Corvette LT1 2014-2019\u003c\/h3\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. Each kit includes everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch cans remove oil and water condensation from crankcase gases before they enter the intake manifold. The closed-loop system also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffectively raises octane and improves engine performance with cleaner inlet air\u003c\/li\u003e\n\u003cli\u003ePrevents oil buildup in the intake, intercooler system walls, throttle body, and intake manifold\u003c\/li\u003e\n\u003cli\u003eExcessive oil collection can be an indicator of engine damage\u003c\/li\u003e\n\u003cli\u003eLowers hydrocarbon emissions\u003c\/li\u003e\n\u003cli\u003eCapacity: 7 fluid ounces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-0987-FL Triple Catch Can Kit, 14-19 Corvette LT1, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2014–2019 Chevrolet Corvette LT1 (Wet Sump)\u003c\/li\u003e\n\u003cli\u003e2014–2019 Chevrolet Corvette LT1 (Dry Sump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eThis triple catch can kit combines both the PCV catch can kit and the dual CCV catch can kit to provide the highest level of crankcase ventilation and engine protection.\u003c\/p\u003e\n\u003ch4\u003eIncludes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch cans with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting brackets\u003c\/li\u003e\n\u003cli\u003ePolished billet aluminum ground plate\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInstruction PDF\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569386348891,"sku":"USA-RAD-20-0987-FL","price":806.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/USA-RAD-20-0987-FL.jpg?v=1783710367"},{"product_id":"radium-engineering-dual-catch-can-kit-chevrolet-corvette-lt1-with-dry-sump-2017-2019","title":"Radium Engineering Dual Catch Can Kit - Chevrolet Corvette LT1 with Dry Sump 2017-2019","description":"\u003ch3\u003eDual Catch Can Kit Radium Engineering for Chevrolet Corvette LT1 with Dry Sump 2017-2019\u003c\/h3\u003e\n\u003ch4\u003ePart Number\u003c\/h4\u003e\n\u003cp\u003e20-1286-FL Dual Catch Can Kit, 17-19 Corvette LT1 with Dry Sump, Fluid Lock\u003c\/p\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2017–2019 Chevrolet Corvette C7 LT1 (Dry Sump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOverview\u003c\/h4\u003e\n\u003cp\u003eThe catch can removes oil and water condensation from crankcase gases before they enter the intake manifold. This helps prevent oil buildup in the intake, intercooler system walls, throttle body, and intake manifold.\u003c\/p\u003e\n\u003cp\u003eCleaner intake air can effectively raise octane, improve engine performance, and reduce hydrocarbon emissions. The closed-loop system also prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eThe kit includes everything required for a complete installation.\u003c\/p\u003e\n\u003ch4\u003eFluid Lock Catch Cans\u003c\/h4\u003e\n\u003cp\u003eIn 2022, Radium Engineering introduced the Fluid Lock® Catch Can design for its standard 7-fluid-ounce catch cans.\u003c\/p\u003e\n\u003cp\u003eTraditional catch cans can overflow if they are not serviced regularly, allowing collected contaminants to be drawn back into the intake system and reducing engine performance.\u003c\/p\u003e\n\u003cp\u003eThe patented Fluid Lock® system prevents the reservoir from overfilling and securely traps collected fluids until the catch can is emptied.\u003c\/p\u003e\n\u003ch4\u003eCollection \u0026amp; Emptying\u003c\/h4\u003e\n\u003cp\u003eThe amount of oil and moisture collected varies depending on the vehicle and driving conditions, so there is no fixed service interval.\u003c\/p\u003e\n\u003cp\u003ePCV catch cans generally collect more contaminants than CCV catch cans.\u003c\/p\u003e\n\u003cp\u003eCheck the fluid level using the integrated dipstick after approximately 3–4 weeks of driving, then establish a maintenance schedule based on your vehicle's collection rate.\u003c\/p\u003e\n\u003cp\u003eCatch cans can be emptied by:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnscrewing and removing the lower reservoir\u003c\/li\u003e\n\u003cli\u003eUsing an optional Petcock Drain Kit when there is sufficient clearance beneath the catch can\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExcessive oil collection may indicate an engine issue, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcessive blow-by from engine damage\u003c\/li\u003e\n\u003cli\u003eCrankcase windage caused by an overfilled oil level\u003c\/li\u003e\n\u003cli\u003ePoor breather port placement or insufficient internal baffling\u003c\/li\u003e\n\u003cli\u003eA PCV valve that is leaking or failing to close under heavy load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e20-1286-FL Dual Catch Can Kit\u003c\/h4\u003e\n\u003cp\u003eThis dual catch can kit includes both PCV and CCV catch cans for maximum engine protection.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation with no drilling required\u003c\/li\u003e\n\u003cli\u003eLarge 10AN ORB inlet and outlet ports\u003c\/li\u003e\n\u003cli\u003e4AN ORB drain port\u003c\/li\u003e\n\u003cli\u003e2-step oil separation baffling\u003c\/li\u003e\n\u003cli\u003eO-ring sealed dipstick\u003c\/li\u003e\n\u003cli\u003e7 fluid ounce capacity\u003c\/li\u003e\n\u003cli\u003ePatented Fluid Lock® system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIncluded\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBaffled oil catch cans with integrated condenser and dipstick\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting brackets\u003c\/li\u003e\n\u003cli\u003ePolished billet aluminum ground plate\u003c\/li\u003e\n\u003cli\u003eSAE quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003e3\/8-inch PCV rubber hose\u003c\/li\u003e\n\u003cli\u003eSpring clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569395982683,"sku":"USA-RAD-20-1286-FL","price":542.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/USA-RAD-20-1286-FL.png?v=1783710511"},{"product_id":"radium-engineering-dual-catch-can-kit-ccv-fluid-lock-chevrolet-corvette-lt1-2014-2019","title":"Radium Engineering Dual Catch Can Kit CCV Fluid Lock - Chevrolet Corvette LT1 2014-2019","description":"\u003ch3\u003eDual Catch Can Kit CCV Fluid Lock Radium Engineering for Chevrolet Corvette LT1 2014-2019\u003c\/h3\u003e\n\u003cp\u003eRadium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits include everything needed for a complete installation.\u003c\/p\u003e\n\u003cp\u003eThe catch can draws out oil and water condensation from the crankcase gases that would otherwise be drawn into the intake manifold. Furthermore, the closed system prevents unwanted oil vapors from entering the cabin.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003cbr\u003eEffectively raises octane and increases engine performance with cleaner inlet air\u003cbr\u003ePrevents oil buildup in the intake, intercooler system walls, throttle body, intake manifold, and other intake components\u003cbr\u003eExcessive oil collection can be an indicator of a damaged engine\u003cbr\u003eLowers hydrocarbon emissions\u003cbr\u003eCapacity: 7 fluid ounces\u003cbr\u003ePart Number\u003c\/p\u003e\n\u003cp\u003e20-0986-FL Dual Catch Can Kit, CCV, 14-19 Corvette LT1, Fluid Lock\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003cbr\u003e2014-2019 Chevrolet Corvette LT1 (Wet Sump)\u003cbr\u003e2014-2019 Chevrolet Corvette LT1 (Dry Sump)\u003cbr\u003eDescription\u003c\/p\u003e\n\u003cp\u003eThe anodized aluminum catch can bracket mounts near the front left-hand side of the engine. A polished billet aluminum plate secures to three OEM grounding points. Because it is manufactured from aluminum, it conducts electricity. The large anodized dual catch can bracket mounts directly to the ground plate.\u003c\/p\u003e\n\u003cp\u003eThe dual CCV (Crankcase Ventilation) catch can kit retains factory functionality and is compatible with both wet sump and dry sump LT1 engines.\u003c\/p\u003e\n\u003cp\u003eFor wet sump engines, each valve cover vents to the intake through its respective catch can.\u003c\/p\u003e\n\u003cp\u003eFor dry sump engines, the left-hand valve cover vents to the intake through its respective catch can. The right-hand valve cover vents through the dry sump system before passing through its respective catch can.\u003c\/p\u003e\n\u003cp\u003eAt low engine loads, these catch cans experience atmospheric pressure. Under high engine load (wide open throttle), the vents experience high crankcase flow. Without a catch can, this can lead to oil and sludge accumulating in the air intake pipe.\u003c\/p\u003e\n\u003cp\u003eIncludes\u003cbr\u003eBaffled oil catch can with integrated condenser and dipstick\u003cbr\u003eAnodized aluminum mounting bracket\u003cbr\u003ePolished billet aluminum ground plate\u003cbr\u003eSAE quick-connect fittings\u003cbr\u003eStainless steel mounting hardware\u003cbr\u003e3\/8-inch PCV rubber hose\u003cbr\u003eSpring clamps\u003cbr\u003eInstructions\u003cbr\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53569412956507,"sku":"USA-RAD-20-0986-FL","price":537.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/files\/USA-RAD-20-0986-FL.jpg?v=1783710790"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/9937\/5126\/collections\/chevrolet-logo-black-and-white_3ffb6a4b-9788-465a-bea2-e1b1f358d9f8.png?v=1794674041","url":"https:\/\/www.qtparts.fi\/fi-eu\/collections\/chevrolet-moottorin-huohotus.oembed","provider":"QT Parts","version":"1.0","type":"link"}