Koti » Audi 2.5 TFSI Evo EA855 EV980 Upgrade MPI Injector Set

Audi 2.5 TFSI Evo EA855 EV980 Upgrade MPI Injector Set

SKU: TTE10185
€585,00 sis. ALV
Varastotuotteiden toimitusaika 1-3 arkipäivää

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.

QT Parts tuotteilla n. 5-10 arkipäivää, muilla 5-21 arkipäivää. Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

 SHARP MOTORSPORT AUDI 2.5 TFSI EVO DAZA, DNWA, DNWC EA855 UPGRADE MPI 980CC INJECTOR SET

 

Providing the extra fuel needed for when wanting to get the most on the dual-injected EA855 Engine, replacing the original MPI injectors

The perfect choice when using a TTE700, TTE777 Upgrade turbocharger, or other big frame turbos available.

Tuning partners considered the best in Europe tested many injectors before deciding on these as the best option of choice. 

Perfect choice for APR, BEVO, DVX, BRP, UNITRONIC, JD ENGINEERING, software calibration options.

 

Genuine UK Sourced Bosch Motorsport Injectors 

Batch colour matched sets (blue, red, orange)

All-New Generation Bosch fuel injectors will function at rail pressures in excess of 101 PSI, 7 bar.

Will maintain consistency to a minimum pulse width of only 1.5 ms.
Excellent low pulse width response with predictable response down to 2ms.

 

Excellent atomisation for modern multi-valve engines.
 

 

  • Set of 5 Injectors 
  • Set of 5 Wiring harness adapters
  • BOSCH EV14 Based Injectors
  • Precision Cut Atomiser
  • Loom Adapters included
  • 7 point multi hole 
  • High Impedance
  • Excellent Response Characteristics
  • 980cc/min = 670g/min = 89lb/hr @ 3bar approx
  • 12-ohm resistance
  • Petrol & E85 compatible
  • Plug & Play 
  • Needs Specific Software Adjustment 
  • Colour batch matched set 
  • Not sold as a flow matched set(Same as APR & UNITRONIC)

Static max flow in test environment:

 

29 PSI (2 bar) 720cc / min = 69 lb / h
43,5 PSI (3 bar) 900cc / min = 86 lb / h
58 PSI (4 bar) 1038cc / min = 99 lb / h
78,5 PSI (5 bar) 1170cc / min = 111 lb / h
88 PSI (6 bar) 1284cc / min = 122 Ib / h
101,5PSI (7bar) 1344cc / min = 128 lb / h

Note that any test environment versus practical use can have various results depending on peripherals and other technical factors. However, this is very good info on what to expect from the injectors and can be used as basic information when choosing other components for the fuel system such as fuel pump, fuel pressure regulator and fuel filter.

 

 THESE ARE NOT TO REPLACE THE DIRECT PORT INJECTORS!