dÄHLer Engine Performance Tuning - BMW 318i G20, G21
Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää.
Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää. QT Parts tuotteilla n. 5-10 arkipäivää, muilla 5-21 arkipäivää. Mikäli tuotteelle tulee esiintymään aiemmin ilmoitettua pidempi toimitusaika, olemme asiasta yhteyksissä.
TUV hyväksytty, laillinen ulkoinen ECU. Tieliikennehyväksytty tuote.
Developed in Switzerland and quality Made in Germany – Our tune works with cars before and after production 06/2020 ! -> Our Engine Performance Tuning Module for the BMW 3 series Sedan G20 and G21 Touring (wagon) integrates flawlessly to extract maximum power and torque without faults and errors – just flawless. The harness has OEM style plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.
Max HP gain:
34 hp / 25 kW
Max Torque gain:
80 Nm / 59 ft-lbs
Standard power:
156 hp (115 kW)
250 Nm (184 ft-lbs)
Enhanced power:
190 hp (140 kW)
330 Nm (243 ft-lbs)
Based on 98 octane rating.
Engine Performance Tuning includes module, wiring harness, an additional bypass for workshop appointments
Works with cars before and after production 06/2020!
Controlling of the Performance Tuning via your smartphone
Tested and approved by the German TUV – comes with TUV approval document if required – EU homologated
Controlling of the dAHLer Engine Performance Upgrade via your smartphone is just one of the awesome features of our tuning module. With our tuning module you have the option to choose your own and fully customizable driving program. Wirelessly connect the dAHLer engine tuning performance module to your Bluetooth 4.0 compatible iOS and Android device via the free dAHLer Mobile app.
This option allows you to change 3 different performance maps, and update the firmware worldwide as we release free newer versions with updates, more powerful maps. If desired the extra power can be easily switched on or off with your smartphone, even while driving.
Our app includes a configurable warm-up timer, so the pilot can decide how long warming up is needed before using the engine tuning. A separate Mobile app purchase is not required!
Our Engine Performance Tuning Module for the BMW 3 series is completely reversible to OEM specs and installs in less than 1 hour just in a few simple steps. This will be a safely upgrade which makes this the easiest and most effective power upgrade you will ever make on your BMW 3 series. For a substantial increase in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then this Engine Performance Tuning Module power upgrade is best!
Inside our dAHLer Engine Performance Tuning Module for the BMW 3 series Sedan G20 and G21 Touring (wagon) is an advanced control unit that is designed to optimize and work with the factory BMW ECU. The BMW 3 series maps and algorithms within the control unit have been elevated for this BMW engine, sending improved fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors.
Also included in the scope of delivery is an adapter which, when installed, returns the vehicle to its original state without having to remove the cable harness of the dAHLer engine performance upgrade. This can be used, for example, at a workshop appointment.
If BMW updates the computer software, our Engine Performance Tuning Module is not lost or overwritten. This is where competitor tuning modules fall short! This is just another key aspect of our module because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained.
The Performance Tuning Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the Module and revert the car to factory settings. With the valet plug installed the BMW engine computer will use the stock maps instead of getting modified data from the Engine Performance Tuning Module.
- Power gains of up to 56 hp to the wheels on a stock vehicle
- Works with cars before and after production 06/2020
- No removal of the DME required
- Controlling of the Performance Tuning via your smartphone
- Quick Plug & Play Installation
- Runs as smoothly as stock, this is how your BMW should have come from the factory
- Compatible with all driving modes
- Fuel economy unchanged during normal driving
- Comes with TUV Part Approval (emission tests according to WLTC regulations)
- EPA compliant (legal in the State of California)
- Worldwide 3-year product warranty
- Ethanol (E93 or less) compatible tuning maps
- Not VIN locked, can be removed without a trace and resold down the road
- Developed in Switzerland and Made in Germany
- Tested on the German Autobahn
- Comes with TUV Part Approval (emission tests according to WLTC regulations)
- EPA compliant (legal in the State of California)
- Worldwide 3-year product warranty
All original dAHLer Line tuning modules come with a worldwide warranty of 3 years.
Customers inside EU, CH, NO:
An external insurance for the engine, gearbox and drive train is already included in the price.
Customers outside EU:
dAHLer makes no guarantees to the lawfulness of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s OEM warranty.
General remark:
dAHLer will not be responsible for poor installation practices. We highly recommend having the assembly carried out by a professional workshop. The product should not be installed by a private individual.
Any modification of the product leads to the automatic cancellation of the warranty.