dÄHLer Engine Performance Tuning - BMW F40 118i 136HP

SKU: 118i-136HP
Normaalihinta €1.995,00 sis. ALV
Varastossa olevien tuotteiden toimitusaika 1-3 arkipäivää
Tilaustuotteissa toimitusaika 1-2 viikkoa

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää. QT Parts tuotteilla n. 5-10 arkipäivää, muilla 5-21 arkipäivää. Mikäli tuotteelle tulee esiintymään aiemmin ilmoitettua pidempi toimitusaika, olemme asiasta yhteyksissä.

TUV hyväksytty, laillinen ulkoinen ECU. Tieliikennehyväksytty tuote.

Developed in Switzerland and quality Made in Germany – Our tune works with all cars before and after production 06/2020 ! -> Our Engine Performance Tuning Module for the BMW 1 series F40 118i and 120i integrates flawlessly to extract maximum power and torque without faults and errors – just flawless. The harness has OEM style plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.

Max HP gain:
25 hp / 18 kW

Max Torque gain:
40 Nm / 30 ft-lbs

Standard power:
136 hp (103 kW)
220 Nm (162 ft-lbs)

Enhanced power:
161 hp (118 kW)
260 Nm (192 ft-lbs)

Based on 98 octane rating.

Works with cars before and after production 06/2020!

Controlling of the Performance Tuning via your smartphone

Performance Tuning Module includes wiring harness and adapter for workshop appointments

Controlling of the dAHLer Engine Performance Upgrade via your smartphone is just one of the awesome features of our tuning module. With our tuning module you have the option to choose your own and fully customizable driving program. Wirelessly connect the dAHLer engine tuning performance module to your Bluetooth 4.0 compatible iOS and Android device via the free dAHLer Mobile app.

This option allows you to change 3 different performance maps, and update the firmware worldwide as we release free newer versions with updates, more powerful maps. If desired the extra power can be easily switched on or off with your smartphone, even while driving.

Our app includes a configurable warm-up timer, so the pilot can decide how long warming up is needed before using the engine tuning. A separate Mobile app purchase is not required!

Our Engine Performance Tuning Module for the BMW 1 series F40 118i and 120i is completely reversible to OEM specs and installs in less than 45 minutes just in a few simple steps. This will be a safely upgrade which makes this the easiest and most effective power upgrade you will ever make on your BMW 1 series F40 118i and 120i. For a substantial increase in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then this Engine Performance Tuning Module power upgrade is best!

Inside our dAHLer Engine Performance Tuning Module is an advanced control unit that is designed to optimize and work with the factory BMW ECU. The BMW 1 series F40 118i and 120i tuning maps and algorithms within the control unit have been elevated for this BMW engine, sending improved fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors.

Also included in the scope of delivery is an adapter which, when installed, returns the vehicle to its original state without having to remove the cable harness of the dAHLer engine performance upgrade. This can be used, for example, at a workshop appointment.

If BMW updates the computer software of the BMW 1 series F40 118i and 120i our Engine Performance Tuning Module is not lost or overwritten. This is where competitor tuning modules fall short! This is just another key aspect of our module because BMW is constantly releasing small software updates. All of the factory diagnostic and service access is retained.

The dAHLer Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the Module and revert the car to factory settings. With the valet plug installed the BMW engine computer will use the stock maps instead of getting modified data from the Engine Performance Tuning Module.

- Power gains of up to 48 hp to the wheels on a stock vehicle
- Works with cars before and after production 06/2020
- No removal of the DME required
- Controlling of the Performance Tuning via your smartphone
- Quick Plug & Play Installation (less than 1 hour)
- Runs as smoothly as stock, this is how your BMW should have come from the factory
- Compatible with all driving modes
- Fuel economy unchanged during normal driving
- 93 octane or less compatible tuning maps
- Not VIN locked, can be removed without a trace and resold down the road
- Made in Germany
- Worldwide 3-year product warranty

Warranty

We offer a worldwide 3-year product warranty.

dAHLer Competition Line makes no guarantees to the lawfulness of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s OEM warranty.