dÄHLer Engine Performance Tuning - BMW F98 X4M 480HP / 510HP
Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää.
Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää. QT Parts tuotteilla n. 5-10 arkipäivää, muilla 5-21 arkipäivää. Mikäli tuotteelle tulee esiintymään aiemmin ilmoitettua pidempi toimitusaika, olemme asiasta yhteyksissä.
TUV hyväksytty, laillinen ulkoinen ECU. Tieliikennehyväksytty tuote.
Developed in Switzerland and quality Made in Germany – Our tune works with cars before after production 06/2020 ! -> Our Engine Performance Tuning Module for the BMW X4 M and M Competition F98 integrates flawlessly to extract maximum power and torque without faults and errors – just flawless. The harness has OEM style plugs to connect in-line with each boost boost pressure sensor, camshaft position sensor and rail pressure sensor on the engine.
BMW X3M 480HP:
Standard power:
480 hp (353 kW)
600 Nm (443 ft-lbs)
Enhanced power:
600 hp (441 kW)
740 Nm (545 ft-lbs)
BMW X3M Competition 510HP:
Standard power:
510 hp (375 kW)
600 Nm (443 ft-lbs)
Enhanced power:
612 hp (450 kW)
740 Nm (545 ft-lbs)
Based on 98 octane rating
Controlling of the dAHLer Engine Performance Upgrade via your smartphone is just one of the awesome features of our tuning module. With our tuning module you have the option to choose your own and fully customizable driving program. Wirelessly connect the dAHLer engine tuning performance module to your Bluetooth 4.0 compatible iOS and Android device via the free dAHLer Mobile app.
This option allows you to change 3 different performance maps, and update the firmware worldwide as we release free newer versions with updates, more powerful maps. If desired the extra power can be easily switched on or off with your smartphone, even while driving.
Our app includes a configurable warm-up timer, so the pilot can decide how long warming up is needed before using the engine tuning. A separate Mobile app purchase is not required!
Our Engine Performance Tuning Module for the BMW X4 M F98 and M Competition is completely reversible to OEM specs and installs in less than 30 minutes just in a few simple steps. This will be a safely upgrade which makes this the easiest and most effective power upgrade you will ever make on your BMW X4 M and M Competition F98. For a substantial increase in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then this Engine Performance Tuning Module power upgrade is best!
Inside our dAHLer Engine Performance Tuning Module is an advanced control unit that is designed to optimize and work with the factory BMW ECU of the BMW X4 M maps and algorithms within the control unit have been elevated for this BMW engine, sending improved fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors.
Also included in the scope of delivery is an adapter which, when installed, returns the vehicle to its original state without having to remove the cable harness of the dAHLer engine performance upgrade. This can be used, for example, at a workshop appointment.
If BMW updates the computer software of the BMW X4 M and M Competition F98, our Engine Performance Tuning Module is not lost or overwritten. This is where competitor tuning modules fall short! This is just another key aspect of our module because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained.
The dAHLer Module for the BMW X4 M and M Competition is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the Module and revert the car to factory settings. With the valet plug installed the BMW engine computer will use the stock maps instead of getting modified data from the Engine Performance Tuning Module.
- Power gains of up to 120 hp to the wheels on a stock vehicle
- Works with cars before and after production 06/2020
- No removal of the DME required
- Controlling of the Performance Tuning via your smartphone
- Quick Plug & Play Installation
- Runs as smoothly as stock, this is how your BMW should have come from the factory
- Compatible with all driving modes
- Fuel economy unchanged during normal driving
- Comes with TUV Part Approval (emission tests according to WLTC regulations)
- EPA compliant (legal in the State of California)
- Worldwide 3-year product warranty
- Ethanol (E93 or less) compatible tuning maps
- Not VIN locked, can be removed without a trace and resold down the road
- Developed in Switzerland and Made in Germany
- Tested on the German Autobahn
Warranty
All original dAHLer Line tuning modules come with a worldwide warranty of 3 years.
Customers inside EU, CH, NO:
An external insurance for the engine, gearbox and drive train is already included in the price.
Customers outside EU:
dAHLer makes no guarantees to the lawfulness of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s OEM warranty.
General remark:
dAHLer will not be responsible for poor installation practices. We highly recommend having the assembly carried out by a professional workshop. The product should not be installed by a private individual.
Any modification of the product leads to the automatic cancellation of the warranty.