GFB DV+ T9302 Diverter Valve - VAG 1.8T 2.7T (e.g. A3 8L, TT 8N, Golf Mk4)
Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.
Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää. Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.
Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.
Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.
Tämä ehto koskee seuraavia tuotekategorioita:
- Alusta
- Engine Tuning
- Moottorin osat
- Pakoputkistot
- Polttoaine
- Turboahtimet
- Voimansiirto
- ECE-hyväksytyt downpipet
Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.
Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.
The GFB DV+ has a brass piston and is self-regulating due to its intelligent design.
Due to the larger surface area of the top side on which the pressure can act compared to the bottom side, the force from above is also greater and keeps the piston closed under load.
With many other manufacturers, other spring sets have to be installed depending on the boost pressure - this is not necessary with the GFB DV+!
The spring stiffness can be adjusted very easily depending on the desired opening time by adjusting screws with different lengths, the spring stiffness can be adjusted very easily depending on the desired opening time by means of adjusting screws with different lengths, in order to set the optimum opening time of the valve during load changes for better response behaviour without causing surging.
30 years warranty!
This valve is suitable for vehicles where a Bosch valve was originally installed.
It feeds the overpressure air back into the intake system.
Inlet: 25mm
Outlet: 25mm
Sopivuus:
