HF-Series Additional Watercooler Intercooler - Mercedes A45 AMG W176
Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää.
Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää. QT Parts tuotteilla n. 5-10 arkipäivää, muilla 5-21 arkipäivää. Mikäli tuotteelle tulee esiintymään aiemmin ilmoitettua pidempi toimitusaika, olemme asiasta yhteyksissä.
This additional watercooler for the Mercedes A45 AMG is a highlight of the HF-Series range.
The HF-Series watercooler is integrated into the system as a third cooler in addition to the two original coolers of the charge air system of your Mercedes A45 AMG.
As a result, the already temperature-reduced water is cooled down even further, as our additional cooler sits directly in the airstream and is constructed in such a way that the water in the cooler rotates 180° and runs through the entire length of the cooler twice.
If you order this cooler in black powder-coated, the upgrade is virtually invisible.
Technical Details:
Length: 630mm
Height: 140mm
Depth: 30mm (AS30)
Volume: about 0,8L water
What will the advantages be, if you are installing an upgrade intercooler?
To name an accurate performance increasement, which results by installing an upgrade intercooler in numbers, many unknown factors, like: further hardware changes, as well as the engine software you are using, have to be determined, because this is different from vehicle to vehicle. As a rule of thumb for ECU remapped engines, you can expect up to 5% - 10%. But what at least also as important is: Regardless whether your ECU is already remapped or if it isn´t, upgrade intercoolers preventing a loss of performance at worse conditions, like high outside temperatures or even to reach the temperature protection of your engine. So you will be always able to count on the full power of it.
Recommendation
Use our HF-Series intercooler to complement your hardware and software setup. By reducing the back-pressure (relieving the turbocharger) and improved cooling of the charged air (increasing the oxygen ratio in the combustion chamber + thermal relief), an increased performance results, which lets you use the potential of any turbo-charged engine efficiently.
If youare thinking about hardware and software tuning on your vehicle, you shouldn´t ignore the fact „Charge air pressure loss“.
So, if you are increasing the perfomance of your car by chiptuning, the charge air pressure will increase in 99% oft he cases. The use of the standard charge air cooler increases the load pressure loss exponentially. This means that the turbocharger has to work even more and the thermal load on the turbocharger increases, the running time drops or is weakened by the high speeds of the turbocharger.
With our HF-Series intercoolers, we create the perfect balance between cooling effect and charge air pressure loss.
HF-Series
HF-Series is the first point of contact when it comes to fresh air supply in vehicles. With this brand, HG-Motorsport has combined professional research and production of high quality intake systems, intercoolers and air guidance systems. In addition to 3D scanning of the vehicle periphery for perfect fitting accuracy, this also includes long series of tests to combine the optimum components for each individual model. The result is racing products.