The IE Carbon Fiber Intake System for your Audi C8 RS6 or RS7 has been engineered for performance first through extensive airflow analysis and design testing. Get ready to experience massive real-world power and torque with 60-70HP gains on tuned engines! Elevate your driving experience by releasing the unique turbo and engine sound, bringing your twin-turbocharged V8 powerhouse to life!
iE Carbon Fiber Intake System - Audi C8 RS6 & RS7
Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää.
Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää. QT Parts tuotteilla n. 5-10 arkipäivää, muilla 5-14 arkipäivää.
MULTI-PIECE
FULL CARBON
COMPLETE INTAKE
INSANE POWER GAINS
60-70+WHP
ON TUNED ENGINES
CFD OPTIMIZED
HIGH-FLOW
MOTORSPORT DESIGN
LEADING FEATURES
- 60-70+ HP/TQ over stock airbox (tune & fuel dependant)
- Up to 60% more flow over stock (with stock inlets)
- Up to 88.46% more flow with optional iE turbo inlets
- Increased flow rate for tuned engines and hybrid turbos
- Complete top & bottom carbon fiber multi-piece system
TURBO INLET UPGRADE
Ready to extract every ounce of power from your intake system? The optional iE Turbo Inlet Pipes deliver an additonal boost to the iE Air Intake System with further improved airflow. Providing an instant 28.46% increase in flow compared to the stock inlets, the combined intake and inlet combo results in an impressive 88.46% flow increase! iE Turbo Inlets are not required for installation and are sold separately.
Looking for additional details, features, and installation specifics on iE Turbo Inlets?
Learn more here >
ADVANCED R&D
The Audi C8 RS6 and RS7 include a unique factory intake design built on the factory radiator shroud. This location provides access to cool air from the front of the grill. Still, it lacks the internal volume, flow optimization, and filter efficiency to support higher power from ECU tunes and turbo upgrades. Extreme engineering practices were required to redesign a proper motorsport intake maximizing the potential of all available space within the challenging factory intake location. The resulting IE performance system delivers power and sound with breathtaking looks for your 4.0TT twin-turbo engine.
STYLE & FUNCTION
The entire airbox is genuine carbon fiber providing superior heat dissipation, lightweight, and solid yet thin-wall construction. Carbon fiber can be molded into near endless shapes allowing our engineers to design complex angles, corners, and extremely tight tolerances to maximize flow and volume in the design without material restrictions or compromises. The final design is all performance on the inside while carrying a stunning gloss carbon weave finish on the outside.
MULTI-PIECE SYSTEM
Maximizing intake efficiency requires taking advantage of every millimeter of available space within the tight confines of the factory engine bay. By dramatically increasing the size and design of the air box's lower and upper sections, the intake can support much higher airflow and volume with superior laminar over the filter, providing unrestricted airflow for higher boost demands and power.
MAXIMIZED VOLUME
More power requires additional airflow. Maximizing the interior volume of the intake is an attack on two fronts. First, the upper lid has been increased in size, filling all available space under the hood with a much smoother transition to the inlets. Volume is further optimized by increasing the internal size and angle of the filter base. The result is far superior air supply on tap for tuned engines requesting more significant boost pressures than stock.
HIGH-VELOCITY DESIGN
Increased intake volume is only helpful if the air supply can reach the turbos effectively. High-level computational flow dynamic (CFD) software is leveraged to calculate the best possible internal angles and shapes to reduce turbulence and increase flow inertia. The organic and smooth transitions are a considerable departure from stock, aiding in faster spool times for reduced lag while reaching peak boost pressures at the earliest point in the RPM band possible.
PRESSURE ZONES
The airbox has been optimized with the performance advantage of multiple air supply avenues. The front air inlet receives outside high-pressure flow from the front of the grille and acts as a ram air design for most of the air supply. Additionally, the bottom airbox inlets pull extra air as required from the low-pressure zone under the intake. These dual zones provide a free air supply across the entire filter and ensure your intake will never be a power limiter for even the most extreme builds.
PERFORMANCE FILTER
The included high-performance air filter maintains superior filtration properties keeping your engine and turbochargers safe from outside contaminants while dramatically increasing performance. The cotton 4-pleat design allows the intake design to increase airflow velocity while retaining a low pressure drop as the airflow passes through the filter element.
UNIQUE SOUND
Installing your intake not only delivers a performance boost, but also releases a new symphony of turbo, throttle, and engine sounds that will make your throttle pedal more addictive than ever.
You drive a twin-turbo V8 flagship Audi; prepare to sound like one!
QUALITY FIT & FINISH
IE's 3D scanning tools create a digital duplicate of the vehicle's engine bay, grille, bumper, and hood. These scans provide an incredibly high-resolution environment allowing our engineers to take advantage of all available space and perfect an extremely high-end install.
HYBRID TURBO READY
iE 4.0T Turbo Inlet Pipes are designed to accommodate stock or hybrid turbos. Our CNC-machined and O-ring sealed adapter rings provide a smooth transition from the large inlet to stock or TTE1020 hybrid turbochargers. The turbo inlet is oversized and seamlessly tapers down to the turbo to meet air supply demands.
Stock turbo adapter rings are included with the optional iE Turbo Inlets. TTE1020 hybrid adapters coming soon.