QT Parts on Suomalainen verkkokauppa.

Varastomme sijaitsee Nokialla, Pirkanmaalla.

Voit tarvittaessa noutaa tilauksesi meiltä. Valitse kassalla "nouto".

Voit maksaa ostoksesi turvallisesti monipuolisilla maksutavoilla.

Myös lasku ja osamaksu. (Klarna)

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.   Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

Yli 350€ tilaukset ilmaisella toimituksella (PostNord)

• Hyväksymme palautuksia 14 päivän ajan lähetyksen vastaanottamisesta.
• Tuotteen tulee olla käyttämätön ja myyntikelpoinen.
• Palautuksen käsittelymaksu 21,90€ yli 200€ tilauksissa.

Tilaustuotteet ja mittatilaustuotteet

Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.

Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.

Tämä ehto koskee seuraavia tuotekategorioita:

• Alusta
• Engine Tuning
• Jäähdytys (pois lukien QT Parts)
• Moottorin osat
• Pakoputkistot
• Polttoaine
• Turboahtimet
• Voimansiirto
• ECE-hyväksytyt downpipet

Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.

Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.

BMW E46 Display – Real-time Vehicle Data Monitoring

Designed for BMW E46 models, this display brings the vehicle's key information directly into the driver's field of vision. The display reads data from the car's CAN bus and presents it on the MFD28 Gen2 display. The included model-specific bezel allows for a neat installation that blends seamlessly with the original dashboard.

The CAN bus protocol, optimized for the BMW E46, enables fast data reading and real-time monitoring. The display is suitable for daily use, fault diagnostics, and more precise monitoring of tuned engines.

Features

• Integrated installation into the BMW E46 dashboard
• Support for up to 128 sensors
• 10 customizable display views with DSS (Display Setup Software)
• Pre-configured display views for quick setup
• Plug & Play installation with the included wiring harness
• 4 analog inputs for external sensors
• Support for ethanol content sensor (Flex Fuel)
• Monitoring of diagnostic data directly on the display
• Datalogging continuously or user-initiated
• Page switching using the original cruise control button
• Anti-glare protective film for better readability

Performance Meter

The display's Performance Meter function allows acceleration measurements without separate devices. Available measurements include:

• 0–100 km/h
• 100–200 km/h
• 0–200 km/h

The results can be used to compare car performance before and after modifications.

Datalogging

All data read by the display can be saved to an internal SD card for later review. Recording can be started manually with one press or kept continuously active.

Recorded data includes engine temperatures, pressures, lambda values, ignition timing, load, and other information available via the CAN bus.

Customizable Alerts

Alerts can be configured on the display based on selected threshold values. For example, excessively high exhaust gas temperature, low oil pressure, or abnormal boost pressure can be prominently brought to the driver's attention.

Pre-set alert templates are available, but users can also define their own thresholds.

Fault Code Reading and Deletion

Engine control unit fault codes can be read and cleared directly from the display. Fault information is presented clearly without a separate diagnostic device, facilitating troubleshooting and maintenance.

Customizable Views

The display's home screen and widgets can be customized according to individual needs. Users can create views for performance monitoring, track driving, tuning, or normal daily driving.

With the DSS software, up to 10 different display pages can be created, which can be switched between while driving.

Data Read from CAN Bus

The display comes with a pre-configured TRI file that contains all available CAN bus signals for the specific vehicle.

Temperatures

• Engine coolant temperature
• Intake air temperature
• Exhaust gas temperature
• Transmission oil temperature

Pressures

• Boost pressure
• Ambient air pressure
• Oil pressure

Lambda and Fuel System

• Target and actual lambda value
• Short Term Fuel Trim (STFT)
• Long Term Fuel Trim (LTFT)
• Mass Air Flow (MAF) value
• Engine load
• Torque

Driving Dynamics

• Vehicle speed
• Brake pressure
• Accelerator pedal position
• Throttle opening angle

Other Information

• Engine speed (RPM)
• Gear information
• Battery voltage
• Total ignition timing advance
• Cylinder-specific ignition timing corrections

Note: Not all engine control units may provide all of the above information for all engine versions.

Connecting External Sensors

The display has four analog inputs to which various 0-5V or NTC-type sensors can be connected.

Typical applications include:

• Oil temperature
• Oil pressure
• Fuel pressure
• Exhaust gas temperature (EGT)
• Exhaust back pressure
• Other temperature and pressure sensors

An ethanol content sensor can be connected to one of the digital inputs, allowing the display to monitor and record the fuel's ethanol content and temperature.

Additional Extensions

Support for CANchecked sensors is pre-integrated into the TRI/TRX files. The sensors only need to be connected to the system.

Supported sensor types:

• Temperature sensor
• K-type exhaust gas temperature sensor (0–1250 °C)
• 0–10 bar pressure sensor
• 0–5.5 bar absolute boost pressure sensor

A CANchecked SLM08 shift light with eight LEDs can also be connected to the display. The LED colors and operating modes can be set directly from the display settings, for example, according to engine speed limits.

Advanced Functions

Mathematical channels allow combining multiple sensor data into new calculated values. User-definable 2D and 3D maps can be used to create custom virtual sensors and calculation functions for more demanding applications.

Package Contents

Delivery includes:

• MFD28 Gen2 display pre-installed in the dashboard bezel
• BMW E46 model-specific wiring harness
• Quick installation guide
• USB data cable
• SD card (pre-installed in the display)
• SD card adapter
• Anti-glare screen protector

Compatibility

Compatible with BMW E46 model series vehicles. Versions available for both left-hand drive (LHD) and right-hand drive (RHD) cars.

A pictorial installation guide is available for installation, ensuring quick commissioning without modifications to the car's original wiring harness.