Eventuri  · SKU: EVE-E9X-CF-INT

Eventuri Carbon Intake - BMW E9X M3

Regular price £997.00 incl. VAT
Finish

Special order – Delivery time 3–12 business days.

International orders may be subject to VAT, import duties, and customs fees upon arrival in the destination country.

EU Legal Guarantee +

Please refer to the information regarding the statutory legal guarantee for goods sold in the European Union.

QT Parts is a Finnish online store.

Our warehouse is located in Nokia, Pirkanmaa.

If needed, you can pick up your order from us. Select "Pickup" at checkout.

You can pay for your purchases securely with a wide range of payment methods.

Invoice and instalment payments are also available. (Klarna)

The delivery time for products in stock is 1-3 business days. Products ordered before 15:00 are shipped the same day.

If the product is not in stock and it is a special-order product, the average delivery time is 3-12 business days.   If the delivery time of the product is longer, we will let you know.

Free shipping on orders over 350€ (PostNord)

  • We accept returns for 14 days from receipt of the shipment.
  • The product must be unused and in resalable condition.
  • Return handling fee 21.90€ on orders over 200€.

Special-order and made-to-order products

If the product you have ordered is a special-order product or a product made to order, it does not have the 14-day right of cancellation or return under the Consumer Protection Act, as the product is manufactured or sourced individually based on the customer's order.

If you wish to cancel the order before receiving the product, we will refund 50% of the order total.

This condition applies to the following product categories:

  • Chassis
  • Engine Tuning
  • Cooling (excluding QT Parts)
  • Engine parts
  • Exhaust Systems
  • Fueling
  • Turbochargers
  • Drivetrain
  • ECE approved downpipes

All of the above products are always manufactured or ordered based on the customer's individual order and cannot be returned after receipt unless the product has a manufacturing or material defect.

In the event of a defect, the normal statutory liability for defects under the Consumer Protection Act applies.

Eventuri Carbon Intake – BMW E9X M3

Note: some images show the optional Carbon Airbox Lid

Performance

  • Dyno measurement: +8–10 hp, +10–12 ft-lb
  • Road dyno (Insoric): +16 hp, +14 Nm
  • IAT (intake air temperature vs. ambient):
    • Stock: +7.5 °C
    • Eventuri: +4.5 °C
  • Acceleration (100–200 km/h): up to 0.3 s faster

Overview

The Eventuri BMW E9X M3 intake system is the result of extensive research and development to optimize the already excellent original intake. BMW's stock airbox is exceptionally well-designed, but Eventuri identified critical limitations, particularly in the pipe between the airbox and the manifold.

By redesigning the intake pipe and retaining the original airbox, engine breathing is significantly improved. Additionally, a carbon fiber scoop was developed for the air supply system, increasing airflow into the airbox. This reduces intake air temperature and improves overall performance.

Dyno Results

Tests show a consistent performance improvement across the entire rev range – not just at peak power. In practice, this means better throttle response both at partial and full throttle, and the engine pulls noticeably more eagerly all the way to the redline.

Testing was conducted using a back-to-back method under the same conditions to ensure comparable results.

Road Dyno (Insoric)

Under road conditions, airflow is more efficient than with a dyno fan, allowing the system to operate optimally. In this scenario, an increase of up to 16 hp and 14 Nm was achieved.

Datalogging – Airflow and Temperature

Measurements show:

  • Higher mass airflow across the entire rev range
  • Significantly better performance at high RPMs
  • Lower intake air temperature

Examples

  • 5000 rpm:
    • Stock: 635 kg/h → Eventuri: 650 kg/h
    • IAT difference: 9.6 °C → 5.3 °C
  • 8300 rpm:
    • Stock: 1168 kg/h → Eventuri: 1202 kg/h
    • IAT difference: 7.6 °C → 4.7 °C

Acceleration Tests (VBOX)

Tests were performed on the same road section under the same conditions:

  • 100–200 km/h:
    • Stock: 9.56 s
    • Eventuri: 9.24 s

An improvement of approximately 0.3 seconds, which is a significant difference at these speeds.

Contents

The system consists of the following components:

  • Carbon fiber intake tube
  • High-flow urethane cone filter
  • Carbon fiber air scoop
  • CNC-machined breather adapter
  • Laser-cut stainless steel debris shield
  • Silicone coupler and OEM-grade clamps

Carbon Intake Tube

The one-piece carbon fiber tube, without internal connections, allows for smooth and laminar airflow. The shape transitions from a round filter connection to an oval manifold connection much more efficiently than the stock solution.

Disadvantages of the stock pipe:

  • Accordion-like flexible sections → turbulence
  • Irregular geometry → weaker flow

Eventuri's solution completely eliminates these problems.

Engine Movement Consideration

The tube is designed to move with the engine without separate flexible connections. A neoprene seal allows for movement while maintaining a tight seal and optimal flow.

Carbon Air Scoop

The stock system draws air from two sources, but the lower feed is the most important. Eventuri improved this by:

  • Removing flow obstructions from the duct
  • Increasing air velocity by up to ~50%
  • Improving air transfer to the airbox

Result: lower intake temperatures and better performance.

Debris Shield

A protective mesh attached to the filter prevents debris and water from entering the filter directly without affecting performance.