iE Audi B9 A4, A5, Q5 2.0T ECU Performance Tune

QT Parts on Suomalainen verkkokauppa.

Varastomme sijaitsee Nokialla, Pirkanmaalla.

Voit tarvittaessa noutaa tilauksesi meiltä. Valitse kassalla "nouto".

Voit maksaa ostoksesi turvallisesti monipuolisilla maksutavoilla.

Myös lasku ja osamaksu. (Klarna)

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.   Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

Yli 350€ tilaukset ilmaisella toimituksella (PostNord)

• Hyväksymme palautuksia 14 päivän ajan lähetyksen vastaanottamisesta.
• Tuotteen tulee olla käyttämätön ja myyntikelpoinen.
• Palautuksen käsittelymaksu 21,90€ yli 200€ tilauksissa.

Tilaustuotteet ja mittatilaustuotteet

Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.

Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.

Tämä ehto koskee seuraavia tuotekategorioita:

• Alusta
• Engine Tuning
• Jäähdytys (pois lukien QT Parts)
• Moottorin osat
• Pakoputkistot
• Polttoaine
• Turboahtimet
• Voimansiirto
• ECE-hyväksytyt downpipet

Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.

Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.

Innovative mobile programming for easy installation

TrueFlex programming for flex-fuel ethanol
91, 93 and 104 fuel maps (95, 98, 108 RON).

Stage 1 for standard technology or light bolt-on upgrades.

With the support of a Stage 2 aftermarket downpipe.

Also available with compatible transmission programming.

Control the Audi Q5 2.0T engine and transmission programming directly from your phone.
iE’s state-of-the-art POWERlink Bluetooth dongle plugs into your vehicle’s OBD II port and wirelessly connects to a mobile app. The app lets you program the ECU, change launch control settings, change octane levels, update Stage levels, run diagnostics, monitor real-time gauge data and more – all from your Apple or Android phone.

BLUETOOTH PROGRAMMING

REAL-TIME METER DISPLAY

OCTANE CHANGE

FAST AND EASY SUPPORT

EFFORTLESS E85

Ethanol is like rocket fuel for everyday driving. Our TrueFlex flex-fuel conversion kit upgrades your engine's original ECU to read and instantly adapt to any ethanol blend, unlocking significantly more power.

More information

TrueFlex programming is included in all Stage levels. Additional hardware required.

FULL POWER FROM ANY TRANSMISSION

2021 and later and some 2019-2020 models feature a Gen 2 Transmission Control Unit (TCU) with advanced factory-level security that prevents programming. The standard TCU software includes limiters that cut engine power when torque limits generated by ECU programming are exceeded.

For Q5 models equipped with a locked TCU, our calibration team has recoded the engine control unit (ECU) to properly manage torque signals between the engine and transmission. This advanced strategy allows for full horsepower and torque levels to be safely achieved even without TCU programming.

Included in all Stage levels and octane options.

ECU STAGE

HIGH PERFORMANCE ENGINE SOFTWARE

Q5 2.0T STAGE 1

Significant performance boost up to 314 horsepower and 396 ft-lb of torque with iE Stage 1 ECU programming for your Audi B9 Q5. Instant power gains, increased torque and quicker acceleration on octane-specific maps (91, 93 or TrueFlex ethanol).

Designed to work with standard technology or compatible with intake manifold, intercooler, catback exhaust and TrueFlex upgrades.

See performance data and dyno curves on the Performance tab.

Q5 2.0T STAGE 2

Ready for more? iE Stage 2 ECU programming with an upgraded downpipe delivers maximum performance from the stock engine and turbocharger: up to 337-377 hp and 410-456 ft-lb of torque. Acceleration is improved across the powerband, with options for 91, 93, 104 or TrueFlex ethanol fuels.

Stage 2 includes an aggressive exhaust note in sport mode.

See Stage 2 hardware requirements below.

EASY LEVEL UPGRADES

Upgrading from Stage 1 to Stage 2 or beyond is easy. With iE, you only pay the difference in software price, with no additional fees. Once the required hardware is installed, follow the instructions in the IE POWERlink app and purchase the upgrade – you’ll be up and running in minutes.

UPDATE GUIDE

While Stage 1 does not require hardware upgrades, upgrading the intake system and intercooler will improve airflow, lower intake air temperatures, and speed up the recovery of thermal management.

DEVICE UPDATES

POWER & SAFETY

Performance programming has been calibrated to maximise the power potential of the engine and turbocharger without compromising safety and driving comfort. All safety features and sensors have been reprogrammed and expanded to match the increased performance.

Every ECU parameter undergoes months of testing on our in-house dynamometer systems, which utilize the world's only Sea Level Generator system to ensure safe operation in all conditions. Drive from Los Angeles to Pikes Peak with confidence and enjoy the power all the way.

"I gained a customer for life."
– Brenton

NEXT LEVEL CUSTOMER SUPPORT

We pay attention to detail and put our customers first in everything we do. Our goal is to provide an easy purchasing process and products that exceed expectations. If you have any questions or need support with programming, our expert support team is ready to help.

Purchasing iE software is not just a purchase – it's a promise that we will always support you.

"We have your back"
– Blais Bros.

COMPATIBILITY

Important:
Engine ECU programming is only compatible with 2017-2020 model years and will not work on new 2021+ ECU versions. Transmission TCU programming is only compatible with DL382 DSG Gen 1 transmissions mainly up to 2020. In some rare cases, 2019-2020 models may have an unsupported Gen 2 TCU.