CB2 exhaust valve control unit for Lamborghini Urus models.
- Lamborghini Urus
- Lamborghini Urus S
- Lamborghini Urus Performante
This control unit allows you to control the exhaust valves via both the ANIMA driving profile and the cruise control lever.
Features and benefits
ANIMA (driving profile)
Sport / Corsa
The exhaust flaps are constantly open, which increases the volume. The end result is a sporty exhaust note.
Strada / Sabbia / Terra / Neve
The flaps open at 4500 rpm or 80% throttle (just before kickdown).
Easy Switch
RESET – 2×
Double press the reset button
By double-pressing the reset button (by pulling the cruise control lever towards you twice), the flaps can be opened and closed regardless of the ANIMA driving profile. Automatic opening at 4500 rpm is always maintained.
Standard mode
Key combination
The module can be activated or deactivated using a key combination. When the module is deactivated, the system operates as if the control unit were not installed.
Additional features and benefits
Transmission S-Detection
When the transmission is placed in S mode, both exhaust flaps open.
(Function only available with original gearbox coding.)
SSA memory
The start-stop system setting is saved and automatically restored after starting the vehicle.
Safe and reliable operation
The device is designed specifically for use with electronic exhaust flap systems.
Plug & Play
The installation is Plug & Play under the driver's seat and directly in connection with the exhaust flaps.
Fully refundable
The system can be deactivated or dismantled at any time without leaving any traces.
Also available in PRO version:
Driving profile memory (ANIMA)
The selected driving profile (e.g. Corsa or Terra) is saved permanently.
Speed Assist Memory (ISA)
Allows you to permanently turn the speed warning sound on or off. Your individual settings configuration is also saved.
Lane Assist Memory (LA)
Allows you to permanently turn on or off the lane keeping assist.
Installation:
- The installation is Plug & Play and takes place under the driver's seat and directly on the exhaust flap. The installation should be done indoors to avoid exposure to moisture. The cables are sized to be long enough to facilitate installation.
Notes:
- This product is not approved for road use - For rail use only
Video example of operation: