Complete installation kit for installing an additional fuel rail in vehicles equipped with a GPF particulate filter.
Unfortunately, fuel injection through the intake manifold has been removed from vehicles equipped with a GPF particulate filter. With tightening emission regulations, this beneficial solution for engine operation has been omitted to meet emission requirements.
Another significant reason for the need for an additional fuel system is the limited capacity of the original direct injection system of the EA888 Gen.3 and evo4 engines. Especially in tuned engines, the original fuel system quickly reaches its upper capacity limit and begins to restrict engine performance.
With this MPI upgrade kit, fuel supply can be enhanced by adding separate intake manifold injectors to the system.
Fuel sprayed into the intake manifold cools the fuel-air mixture, which improves engine operating conditions. In addition, intake manifold injection reduces the accumulation of carbon deposits on the intake valves. This is a significant added benefit alongside performance improvement.
The AEM Flex Fuel sensor with threaded connections enables precise real-time measurement of the fuel's ethanol content and temperature.
With the MPI upgrade kit, four additional injectors can be integrated into the fuel system. The system is connected to the original fuel system using a Y-branch connection. The included wiring harness connects to the original engine control unit on a Plug & Play basis.
The kit can be installed either in the manufacturer's MQB RACE intake manifold or in the vehicle's original intake manifold.
Features
-
Increases fuel supply capacity – especially recommended for power levels above 550 hp.
-
Four additional injectors for EA888 Gen.3 and evo4 engines.
-
Precisely sized 980 cc/min injectors.
-
Higher flow capacity than the original fuel rail.
-
Even fuel distribution thanks to the open pipe design.
-
Designed for EV14-type injectors.
-
AEM Flex Fuel ethanol sensor.
-
Machined from high-quality billet aluminum.
-
Excellent suitability for tuned and performance-enhanced engines.
Installation Notes
The original fuel line must be cut during installation. This therefore limits the ability to restore the aftermarket installation to its original configuration.
Before cutting the fuel line, it must be ensured that the installation can be carried out properly. A suitable collection container for fuel recovery must be prepared for the work. In addition, fire extinguishing equipment, such as a fire extinguisher, must be available.
Proper safety glasses and protective gloves must be used during installation.
The engine management system always requires modifications and individual programming to ensure that the additional injectors and Flex Fuel system operate correctly.