Eventuri Carbon Intake - Chevrolet C8 Z06 Corvette

QT Parts on Suomalainen verkkokauppa.

Varastomme sijaitsee Nokialla, Pirkanmaalla.

Voit tarvittaessa noutaa tilauksesi meiltä. Valitse kassalla "nouto".

Voit maksaa ostoksesi turvallisesti monipuolisilla maksutavoilla.

Myös lasku ja osamaksu. (Klarna)

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.   Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

Yli 350€ tilaukset ilmaisella toimituksella (PostNord)

• Hyväksymme palautuksia 14 päivän ajan lähetyksen vastaanottamisesta.
• Tuotteen tulee olla käyttämätön ja myyntikelpoinen.
• Palautuksen käsittelymaksu 21,90€ yli 200€ tilauksissa.

Tilaustuotteet ja mittatilaustuotteet

Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.

Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.

Tämä ehto koskee seuraavia tuotekategorioita:

• Alusta
• Engine Tuning
• Jäähdytys (pois lukien QT Parts)
• Moottorin osat
• Pakoputkistot
• Polttoaine
• Turboahtimet
• Voimansiirto
• ECE-hyväksytyt downpipet

Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.

Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.

Eventuri Carbon Intake – Chevrolet C8 Z06 Corvette

Reference Performance:

• Peak Power Increase: +19 whp / +18 ft-lb
• Mid-Range Increase: +42 whp / +44 ft-lb

Next-Generation Intake for the C8 Z06

The Eventuri C8 Z06 intake represents a significant leap forward in intake system design, setting a new standard for performance and innovation on this platform.

By moving away from the limitations of the OEM trunk panel, Eventuri has designed a completely new, larger intake architecture. At the same time, the system showcases the carbon fiber construction through a transparent polycarbonate panel – uniquely combining performance and aesthetics.

Removing OEM Limitations

The original Z06 intake is based on the Stingray's LT3 architecture and includes several compromises:

• Restricted shape and volume
• Forced placement due to OEM panel
• Insufficient flow for the more powerful LT6 engine

Eventuri's solution:

• Larger, organically shaped intake
• Patented Venturi housing design
• Optimized, less restrictive airflow

Result: a significant increase in power and torque across the entire rev range – especially in the mid-range, where the change is dramatic.

Dyno-Tested Performance

The system was developed in collaboration with Paragon Performance, who were responsible for testing and data logging.

Testing was carried out under controlled conditions:

• Stock car before and after installation
• Consistent temperatures and minimized variables
• Multiple measurements to ensure reliability

Results:

• Clear power increase across the entire rev range
• Maximum benefit in the mid-range (3500–5500 rpm)
• “Flat spot” completely eliminated
• Improved throttle response and driving feel

Development Process

The final product is the result of multiple prototypes and iterative development:

• Each version was dyno-tested
• Design was optimized based on data
• Result: maximized performance and flow

CFD Flow Optimization

CFD analysis was utilized to optimize the shape:

• Turbulence minimized before the filters
• Airflow is shaped to be smooth and linear
• Laminar flow maintained in the MAF tubes all the way to the engine

System Contents

• Carbon fiber Double Venturi filter housing
• Custom high-flow dry cone filters
• Carbon fiber intake ducts
• Transparent polycarbonate trunk panel (Coupe & HTC)
• Silicone couplers
• Laser-cut stainless steel brackets and heat shields
• Custom inlet flanges
• Flexible specialty hoses

All carbon fiber parts are manufactured from 100% pre-preg carbon fiber without fiberglass, ensuring an extremely smooth internal surface and optimal airflow.

Patented Venturi Filter Housing

• Two Venturi elements combine into a large volume
• Integrated two MAF tubes (airflow for both cylinder banks)
• Smooth transition from filters to engine

Venturi effect:

• Accelerates airflow
• Maintains laminar flow
• Improves engine response

This is Eventuri's most advanced housing design to date.

Custom Cone Filters

• Optimized size and shape for flow
• Balance between filtration surface area and volume
• ISO-tested OEM-level filtration
• Dry construction for easy maintenance

Carbon Fiber Intake Ducts

• Direct cool air from the sides straight into the system
• Sealed with neoprene gaskets
• Maximized internal volume → minimal flow resistance

Transparent Trunk Panel

• Allows for a larger intake structure
• Showcases the carbon fiber system
• First of its kind on the C8 Z06 platform

Refined Details

Brackets:
Laser-cut stainless steel and aluminum – neat integration of OEM wiring

Inlet flanges and hoses:
Prevent hot engine bay air from entering the system

Flexible hoses:
Allow movement with the engine while maintaining a seal

Summary

The Eventuri Carbon Intake for the C8 Z06 offers a comprehensive performance upgrade:

• Significant increase in power and torque
• Particularly large improvement in the mid-range
• Better throttle response and driving feel
• Optimized airflow and lower temperatures
• Striking carbon fiber finish

This is not just an intake – it's an upgrade that transforms the entire driving experience.