Forge Motorsport  · SKU: FMINDK31

Forge Motorsport Induction Kit - Renault Megane RS 280/300 2016-2021

Regular price €458,00 incl. VAT

Special order – Delivery time 3–12 business days.

International orders may be subject to VAT, import duties, and customs fees upon arrival in the destination country.

EU Legal Guarantee +

Please refer to the information regarding the statutory legal guarantee for goods sold in the European Union.

QT Parts is a Finnish online store.

Our warehouse is located in Nokia, Pirkanmaa.

If needed, you can pick up your order from us. Select "Pickup" at checkout.

You can pay for your purchases securely with a wide range of payment methods.

Invoice and instalment payments are also available. (Klarna)

The delivery time for products in stock is 1-3 business days. Products ordered before 15:00 are shipped the same day.

If the product is not in stock and it is a special-order product, the average delivery time is 3-12 business days.   If the delivery time of the product is longer, we will let you know.

Free shipping on orders over 350€ (PostNord)

  • We accept returns for 14 days from receipt of the shipment.
  • The product must be unused and in resalable condition.
  • Return handling fee 21.90€ on orders over 200€.

Special-order and made-to-order products

If the product you have ordered is a special-order product or a product made to order, it does not have the 14-day right of cancellation or return under the Consumer Protection Act, as the product is manufactured or sourced individually based on the customer's order.

If you wish to cancel the order before receiving the product, we will refund 50% of the order total.

This condition applies to the following product categories:

  • Chassis
  • Engine Tuning
  • Cooling (excluding QT Parts)
  • Engine parts
  • Exhaust Systems
  • Fueling
  • Turbochargers
  • Drivetrain
  • ECE approved downpipes

All of the above products are always manufactured or ordered based on the customer's individual order and cannot be returned after receipt unless the product has a manufacturing or material defect.

In the event of a defect, the normal statutory liability for defects under the Consumer Protection Act applies.

Forge Motorsport Renault Megane RS 280/300 - Intake

The Renault Megane RS 280/300 intake has been designed based on extensive engineering tests, dyno measurements, and flow analyses. The development focused on three main goals:

  • Low intake air temperatures compared to other aftermarket intakes
  • Improved airflow
  • Stylish appearance that completes the engine bay's look

Optimal intake air temperature

The first goal was achieved by placing the PRORam filter in a CAD-designed aluminum intake housing. The original intake housing is located at the rear of the engine bay, where temperatures can easily rise high. Therefore, special attention was paid to preventing hot air entry and providing the most effective thermal protection for the intake housing.

Both original OE air ducts have been retained in the design to ensure the most efficient cold air flow to the filter. The aim of these solutions is to keep the intake air temperature (IAT) as low as possible.

More efficient airflow

The second goal was achieved by testing and comparing several different air filters. To ensure the reliability of the measurement results, the tests were performed on two independent dynamometers.

Test results showed that the best performance benefits were achieved with the PRORam Performance air filter.

Unlike many other aftermarket intakes, this system utilizes a large velocity stack air guide, inside which the air filter is positioned. The filter uses high-quality, high-flow synthetic nanofiber filter material, which is pleated to maximize the filtration surface area. This allows for greater airflow to the turbocharger.

Measured performance benefits

Measurement results show a clear performance improvement. The Forge Motorsport intake achieved a +15 hp power increase, even though the ambient temperature in the dynamometer measurement room increased by 3 °C during the test.

The greatest performance improvement was achieved by combining FMINDK31 and FMTIA4 components. The test was conducted during the hottest part of the day, but an impressive +20 hp power increase was still achieved.

At the same time, torque increased especially at lower revolutions, which improves the engine's throttle response and reactivity.

For comparison, a competing intake system available on the market was also tested. It was also found to perform well, highlighting the importance of an efficient and free-flowing filtration solution in this vehicle.

The test vehicle used was a Renault Megane RS 280 Cup, which had K-Tec Stage 1 programming, a performance exhaust system, and a sport catalytic converter.

Tests were conducted on Litchfield's Maha dynamometer. In addition, measurements were taken at Performance Remap's VTEC all-wheel-drive dynamometer in Gloucestershire. The use of two independent dynamometers allowed for cross-referencing results and ensuring the reliability of the measurements.

Stylish and refined design

In addition to performance, the goal has been to improve the appearance of the engine bay. The design has emphasized functionality above all else, but the end result was also intended to be subtle, high-quality, and purposeful.

The black, textured powder-coated finish gives the intake housing an OEM-level finish.

The cold air side of the intake housing has been left open to enhance airflow and to showcase the large PRORam filter.

From the first use, the finish of the structure and the quality of the materials are evident. Details such as the precisely machined MAF sensor mounting housing and laser-cut precision fasteners highlight the high manufacturing quality.

Better performance and a sportier sound profile

Thanks to more efficient airflow, in addition to increased performance, the engine's sound profile becomes slightly sportier.

Forge Motorsport offers a lifetime warranty for the components of the intake kit, which does not cover the air filter.

Compatibility

A frequently asked question is whether the intake is compatible with turbo inlet hoses from other manufacturers.

Yes. The system can be combined with inlet hoses from other manufacturers, and it is also compatible with the original Renault inlet hose.

Technical features

  • MAF sensor mounting housing, made from 6082 aircraft-grade aluminum
  • Black anodization and powder coating for optimal protection and durability
  • PRORam Performance air filter with high-quality, high-flow synthetic nanofiber filter material
  • Pleated filter design maximizes filtration surface area and airflow
  • No engine malfunction light (EML)
  • Improved airflow
  • Forge Motorsport silicone hoses
  • High-quality fluorosilicone inner liner integrated into the silicone hoses
  • Suitable for use with modern long-life coolants and OAT (Organic Acid Technology) coolants
  • Fluorosilicone inner layer is also suitable for air containing oil mist
  • Hose construction is designed to exceed the performance and durability of original OEM hoses
  • Improves the technical functionality and appearance of the engine bay
  • Lifetime warranty