QT Parts  · SKU: haldexflash-obd

Haldex.Flash OBD - MQB Audi, Seat, Skoda, Volkswagen (2013-2021)

Regular price €499,00 sis. ALV

International orders may be subject to VAT, import duties, and customs fees upon arrival in the destination country.

EU Legal Guarantee +

Please refer to the information regarding the statutory legal guarantee for goods sold in the European Union.

QT Parts on Suomalainen verkkokauppa.

Varastomme sijaitsee Nokialla, Pirkanmaalla.

Voit tarvittaessa noutaa tilauksesi meiltä. Valitse kassalla "nouto".

Voit maksaa ostoksesi turvallisesti monipuolisilla maksutavoilla.

Myös lasku ja osamaksu. (Klarna)

Varastossa olevien tuotteiden toimitusaika on 1-3 arkipäivää. Ennen klo 15 tilatut tuotteet lähetetään samana päivänä.

Mikäli tuotetta ei ole varastossa ja kyseessä on tilaustuote, keskimääräinen toimitusaika on 5-14 arkipäivää.   Mikäli tuotteen toimitusaika on pidempi, ilmoitamme siitä.

Yli 350€ tilaukset ilmaisella toimituksella (PostNord)

  • Hyväksymme palautuksia 14 päivän ajan lähetyksen vastaanottamisesta.
  • Tuotteen tulee olla käyttämätön ja myyntikelpoinen.
  • Palautuksen käsittelymaksu 21,90€ yli 200€ tilauksissa.

Tilaustuotteet ja mittatilaustuotteet

Mikäli tilaamasi tuote on tilaustuote tai tilauksesta valmistettava tuote, sillä ei ole kuluttajansuojalain mukaista 14 päivän peruutus- tai palautusoikeutta, koska tuote valmistetaan tai hankitaan yksilöllisesti asiakkaan tilauksen perusteella.

Jos haluat peruuttaa tilauksen ennen tuotteen vastaanottamista, hyvitämme 50 % tilauksen loppusummasta.

Tämä ehto koskee seuraavia tuotekategorioita:

  • Alusta
  • Engine Tuning
  • Jäähdytys (pois lukien QT Parts)
  • Moottorin osat
  • Pakoputkistot
  • Polttoaine
  • Turboahtimet
  • Voimansiirto
  • ECE-hyväksytyt downpipet

Kaikki edellä mainitut tuotteet valmistetaan tai tilataan aina asiakkaan yksilöllisen tilauksen perusteella, eikä niillä ole palautusoikeutta tuotteen vastaanottamisen jälkeen, ellei tuotteessa ole valmistus- tai materiaalivirhettä.

Mahdollisissa virhetilanteissa sovelletaan normaalia virhevastuuta kuluttajansuojalain mukaisesti.

The long-awaited 5th generation Haldex AWD software update is finally available!

Program your Haldex controller easily and safely even in your backyard!

More grip with a reasonable traction ratio, better drivability & faster four-wheel drive engagement, all safely and reliably.

In standard condition, the 5th generation Haldex unit distributes only 30% of the power to the rear wheels during acceleration, although it can distribute up to 50%.

However, the 50/50 ratio is achieved only in rare situations, and for the most part the power distribution is 70/30 between the front and rear axles.

For example, in a MK7 R Golf with standard 5th generation Haldex four-wheel drive, from 300 horsepower only approx. 90 horsepower is distributed to the rear axle. See the image below.

Our software enables an almost perfect 50-50 power distribution between the front and rear axles, which significantly improves performance in all driving situations. This is all achieved while keeping the factory settings of the Haldex system safe.

-> After the Haldex software update, up to 150 of the 300 horsepower is distributed to the rear axle. See the image below.

Tuned vehicles benefit from this even more, as the higher the power, the more force is applied to the front axle, which can lead to a loss of traction, especially on starts.

  • Less understeer - Better cornering, less understeer
  • Faster engagement of four-wheel drive - More grip
  • Better acceleration & drivability
  • Completely safe solution - Factory-level security features are maintained
  • 50-50 Power split under acceleration for a sportier drive + traction 
  • Torque split is not limited at higher speeds 
  • 65% power increase to the rear 
  • New launch control strategy allowing faster launch times
  • Pump adaptions are carried out via our tool so no need for separate diagnostic tool!
  • RS3-TTRS Supported

The mandatory update for cars equipped with 5th generation Haldex four-wheel drive is approaching.

2WD MODE NOW AVAILABLE!

We’ve just added a brand-new feature to Haldex.Flash: Switchable Front Wheel Drive mode for MQB cars.

It’s selectable via a factory drive mode setting of your choosing Eco / Comfort / Race mode, allowing true 2WD driving on demand — ideal for spirited driving, dyno work, and yes… burnouts.

  • Switch using the OEM drive mode selector
  • Programable to Eco/Efficiency, Normal/Comfort and Race/Dynamic, other modes return to your tuned AWD behaviour
  • No extra hardware required
  • Only available with our full Haldex tune

Don't compare with cheap & unreliable "piggy bag" modules.

The package includes:

  • 1 x Haldex.Flash OBD Dongle (iOS & Android)
  • 1 x Haldex.Flash Software
  • 1 x Haldex.Flash Digital VIN license

Compatibility:

AUDI 

  • S3 Quattro 8V (2014-2019)
  • A3 Quattro 8V (2015-2020)
  • Q3 Quattro (2019-2022)
  • TT/TTS Quattro MK3 (2015-2023)
  • RS3 8V (2015-2020)
  • TTRS 8S (2016-2024)

SKODA

  • Octavia 4×4 (2013-2020)
  • Superb 4×4 (2015-2020)
  • Kodiac 4×4 (2017-2020)
  • Karoc 4×4 (2017-2020)

SEAT

  • Leon 4Drive (2013-2020)
  • Ateca 4Drive (2018-2020)
  • Terraco 4Drive (2018-2020)

VW

  • Golf MK7 R (2014-2019)
  • Golf MK7 Sportcombi (2013-2022)
  • Golf Alltrack (2017-2022)
  • T-Roc (2018-2022)
  • Tiguan (2014-2022)
  • Passat B8 (2015-2022)
  • Arteon (2017-2020)
  • Atlas (2018-2022)

The Haldex module must be equipped with part number: 0CQ 907 554 (X).